Lincolnshire · England
Bath Repair for Kirton Holme homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Kirton Holme and across Lincolnshire. Free, fixed quotes from your pictures.
- Repairs from £95
- Cracks in an acrylic bath
- A kit repair that didn’t last
Aftercare tips
Nothing complicated is needed:
- Keep metal cans and razors off the surface
- Keep abrasive pads and gritty cleaners away from the bath
- Check that an acrylic bath does not move when you stand in it
- A dripping tap stains enamel, so fix it early
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine without abrasive products.
Stop using the bath if a crack lets water through. Leaks under a bath can damage floors and ceilings.
Bath repair in Kirton Holme, done in place
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. Our technicians work on cast iron enamel, pressed steel enamel and roll-top & freestanding, and people most frequently call us about impact holes in acrylic and rust by the waste and overflow.
Whatever the size of the job, it’s backed by a one-year guarantee in Kirton Holme and across Lincolnshire.
- Area
- Kirton Holme (PE20)
- Area hub
- Lincolnshire
- Cover
- A year, on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace: which is better?
Swapping a damaged bath for a new one normally means a plumber, removing the old bath, making good the tiles and panel and disposing of the old one. Repairing it fixes just the damaged area in a single visit. Repairs from £95, with every job priced individually. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- No extra charge for your area
- Colour-matched on site
- We come to you, anywhere in the UK
Take a look at our prices page and resurfacing vs replacement cost guide.
How we price bath repair
Repairs from £95. We charge the same across the UK, including Kirton Holme. The price reflects:
- Doing more than one item at once
- What the surface is made of
- The colour and finish to match
- Where the damage is and how we get to it
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
The better the photos, the more accurate the price. Here’s what helps:
- A coin or ruler next to the damage for scale
- Where you are, by postcode
- Any details about the material
- One sharp close-up of the damage
To get a price, send a couple of photos using our quote form or call us. We’ll tell you honestly if a repair is the right fix.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Places near Kirton Holme
What else we do in Kirton Holme
Materials and what they mean for the repair
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
The process
Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes a few hours, depending on the damage, and we leave the room as we found it.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can typically use the bath the day after.
Preparing for the visit
- Let us know if it has been repaired before
- Mention any parking restrictions or tricky access
- Tell us if there are stairs or a lift
Get a quote
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Related advice
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Common questions in Kirton Holme
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
How invisible is a bath repair?
On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Do you work in Kirton Holme?
Yes. We work across the UK and come to Kirton Holme. Send us pictures for a fixed quote, or call 0345 017 0787.
Can a cracked acrylic bath be fixed?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
How long does the repair take to cure?
Normally the next day. We’ll tell you the exact curing time when we finish.
Is a holed acrylic bath repairable?
In most cases. Photos of the hole and the underside help us check.
Can you match an avocado or pink bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
What we can’t put right
In fairness, there are a few things a repair won’t fix:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- A bath that moves underfoot, until its support is fixed
- Leaks from the waste or overflow fittings (a plumber’s job)
Send us pictures and we’ll tell you honestly before booking.
Materials we work on in Kirton Holme
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
Our work in Kirton Holme
Kirton Holme is about 4 miles west of Boston, in Lincolnshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our technicians cover 732 places in Lincolnshire, from the larger towns to small villages.
Every address in PE20 is covered. Streets in the area include Station Road, Boston Road and Beck Bank, all of which we cover. Close by, we cover Hubbert's Bridge (1 mile north-east), Baythorpe (1 mile west), Swineshead (2 miles south-west), Drayton (2 miles south-west) and Brothertoft (2 miles north). Further out, we also cover Boston (4 miles east), Spalding (12 miles south), Sleaford (12 miles west), Holbeach (12 miles south-east), Woodhall Spa (14 miles north) and Pinchbeck (10 miles south).
Around Kirton Holme
In Kirton Holme, that means homes near Christ Church, among other places. The closest station to Kirton Holme is Hubberts Bridge station, roughly 1.1 miles north-east of the centre. Nearby you’ll also find Frampton Castle (4.4 miles south-east) and Pilgrim Hospital (5.1 miles north-east).
About our accreditations · Every repair comes with a one-year guarantee.
