Lincolnshire · England
Bath chip & crack repair in Lade Bank, Lincolnshire
Local bath repair for Lade Bank: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- Scratches you can feel with a fingernail
- An old repair that has yellowed or come loose
About our bath repair in Lade Bank
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Typical jobs include a cracked acrylic bath and chips along the edge of the bath, across whirlpool & spa baths, pressed steel enamel and roll-top & freestanding.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Area
- Lade Bank (PE22)
- County
- Lincolnshire
- Cover
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Repairs from £95. There is no area surcharge for Lade Bank. The price reflects:
- Any earlier repairs that need removing first
- Unusual colours or finishes
- The type of damage
- Doing more than one item at once
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Getting a price from pictures
Two or three clear pictures are typically enough. Try to include:
- Any earlier repairs or coatings
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
Email us a photo of the damage and one of the entire item, and tell us you are in Lade Bank, and we’ll reply with a fixed price.
Signs you need bath repair in Lade Bank
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
If you can see any of these, send us a photo:
- Snagging damage from a refit
- Deep scratches in acrylic
- Impact holes in acrylic
- A chip where the taps sit
What your quote should include
- How long it needs to cure
- Whether there are any call-out or travel charges
- What happens if they find more damage
- How the colour is matched
Also near Lade Bank
More services for Lade Bank
For landlords and businesses
We’re used to working with agents and managing companies. Send the address, photos and access details.
For anyone letting property in or around Lade Bank, we will quote for several properties at once. Send pictures for each one and we’ll price them together.
What your bath is made of matters
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
Where we work around Lade Bank
Lade Bank is about 9 miles north-east of Boston, in Lincolnshire. Wherever you are in the PE22 postcode area, we carry out the work at your property. We cover all 732 towns and villages across Lincolnshire.
Every address in PE22 is within our area, from the main roads to the quietest streets. Neighbouring places we cover include Wrangle Bank (1 mile south-east), Small End (2 miles east), Wrangle (3 miles south), Friskney (3 miles east) and Wrangle Lowgate (3 miles south-east). Further out, we also cover Boston (9 miles south-west), Skegness (11 miles north-east), Horncastle (13 miles north-west), Woodhall Spa (14 miles west), Witham (9 miles south-west) and Staniland (9 miles south-west).
Local landmarks in Lade Bank
For rail, the closest station is Thorpe Culvert station, roughly 5 miles north-east of the centre.
How to care for the repair
Once the work has cured, treat it gently:
- Stick to mild cleaners and a soft cloth
- Check that an acrylic bath doesn’t move when you stand in it
- Don’t scrub with anything abrasive
- Have new chips seen to early
A repaired bath needs no special treatment, just sensible cleaning. Avoid bleach-based and gritty cleaners and rinse after use.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
What happens on the day
You don’t need to empty the room. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. Most jobs take a few hours, and you can get on with other things while we’re there.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Point us to the nearest place to park
- Avoid using the area for a few hours before we arrive
- Have a window or extractor fan available
How to get a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Related advice
FAQs for Lade Bank
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Do you work for landlords and businesses?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
What happens next?
We come back with a fixed price, plus dates. There’s no obligation to book.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Will there be a smell?
There may be a mild smell during the work.
Do you work in Lade Bank?
Yes, we do. We send a technician to Lade Bank for every job, with no extra charge for travel.
Can you repair a hole in a bath?
In most cases. Photos of the hole and the underside help us check.
How soon can you come?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
When we’d advise against a repair
A repair is not right for every job, for example:
- Cracks in parts of an acrylic bath we can’t get to from below
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaking fittings, which need a plumber
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
About our accreditations · Every repair comes with a one-year guarantee.
