Lincolnshire · England
Bath Re-enamelling for Lade Bank homes
Our repair technicians come to Lade Bank for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- An original cast iron bath that needs restoring
How it works
Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes most of the day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Clear the area around the damage
- Let us know which floor the room is on
- Keep a parking space free if you can
Get a quote
If you’re in Lade Bank and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Related advice
Bath re-enamelling in Lade Bank without replacing anything
If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Whether it’s lots of chips and rust spots and a peeling or bubbling previous coating, we can usually put it right, whatever the material.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Lade Bank (PE22)
- Region
- Lincolnshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Common problems we fix in Lade Bank
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, usually first under the taps and around the waste.
You may need us if you’ve spotted any of these:
- Brown or grey marks that do not clean off
- A dull, rough surface that will not come clean
- An outdated colour you’d like to change
- Worn patches where water runs and sits
Questions to ask before you book
- What prep work is covered
- How to care for the finish
- Whether the price is fixed and includes VAT
- When it can be used again
Covering Lade Bank
Lade Bank is about 9 miles north-east of Boston, in Lincolnshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. Lade Bank is one of 732 places in Lincolnshire where we work.
Postcode districts we cover here: PE22. We also cover the places around Lade Bank: Wrangle Bank (1 mile south-east), Small End (2 miles east), Wrangle (3 miles south), Friskney (3 miles east) and Wrangle Lowgate (3 miles south-east). Larger places within reach include Boston (9 miles south-west), Skegness (11 miles north-east), Horncastle (13 miles north-west), Woodhall Spa (14 miles west), Witham (9 miles south-west) and Staniland (9 miles south-west).
Around Lade Bank
The nearest railway station is Thorpe Culvert station, about 5 miles north-east.
What affects the price in Lade Bank
Prices start from £350. We charge the same across the UK, including Lade Bank. The price reflects:
- The type of damage
- The colour and finish to match
- How many areas need work
- How many items we do on one visit
Compared with replacing, a repair is normally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Quotes from your pictures
When you take your pictures, these tips help us give you a firm price:
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
- Your postcode, so we can check dates
- A wider photo showing the entire bath
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote the same day in most cases.
Also near Lade Bank
Also in Lade Bank
Lade Bank questions
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Lade Bank.
Do the materials smell?
Expect a mild smell while we’re working that clears as it cures.
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
Do you cover the whole of Lincolnshire?
We work UK-wide, and that includes Lade Bank. Prices don’t change with location.
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from pictures. You will get a fixed figure before you book.
What happens once I’ve sent pictures?
You’ll get a fixed quote back, generally with dates to choose from. There is no obligation to book.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Include photos of each item.
What we can’t put right
Some jobs are not right for a repair, including:
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
Not sure? Send pictures and we will give you a straight answer before you book.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
Looking after it afterwards
Once the work has cured, treat it gently:
- Respect the curing time we give you
- Wipe the bath dry after use in hard water areas
- Keep suction mats out of the bath
- Use washing-up liquid and a soft cloth
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Should you replace it?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. We do not add extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- Same prices wherever you are
- Free fixed quotes from pictures
- Usually one visit, start to finish
- We leave the room as we found it
See our prices page and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
