Staffordshire · England
Bath chip & crack repair in Landywood, Staffordshire
Problem with your bath in Landywood? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- Chips along the edge of the bath
- Chips under the taps
How we handle bath repair in Landywood
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. Nothing is unplumbed, the tiles aren’t touched, and the finish is matched to the rest of the bath. If you are dealing with impact holes in acrylic and a cracked acrylic bath, we can help, whatever the material.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we will come back.
- Area
- Landywood (WS6)
- Area hub
- Staffordshire
- Warranty
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath repair
Repairs from £95. Prices are worked out job by job, from your pictures. The main factors are:
- The type of damage
- Doing more than one item at once
- How hard the colour is to match
- Access to the area
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Getting a price from pictures
Photographing the damage takes a minute. Try to send:
- A wider photo showing the whole bath
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
To get a price, send two or three pictures through our quote form or ring us. We’ll say immediately if a repair is the right fix.
Where we work around Landywood
Landywood is about 3 miles north of Bloxwich, in Staffordshire. Across the WS6 area, we carry out the work at your property. Landywood is one of 512 towns and villages in Staffordshire we cover. You can also see our page for Birmingham, about 14 miles away.
Our visits in WS6 work the same way as everywhere else we cover. That includes homes on Well Lane, Holly Lane and Anson Road. Other places close to Landywood include Great Wyrley (1 mile north), Upper Landywood (1 mile south-west), Newtown (1 mile south), Littlewood (1 mile north) and Cheslyn Hay (1 mile north-west). Larger places within reach include Stafford (11 miles north), Tamworth (14 miles east), Cannock (3 miles north), Lichfield (8 miles east), Rugeley (8 miles north-east) and Burntwood (4 miles north-east).
Around Landywood
Locally, our jobs take us to homes close to St Andrew's Church, Great Wyrley Academy and Landywood Primary School. Landywood has its own railway station: Landywood station. Nearby you will also find Bloxwich Hospital (2.8 miles south) and Walsall Castle (4.8 miles south). The countryside around Landywood includes Pouk Hill.
- Parks and local facilities nearby include Cheslyn Hay South (0.8 miles west)
Why repair rather than replace?
A new bath brings a chain of other jobs: tiles along the rim generally crack when it comes out, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. A repair skips all of it. Prices start from £95. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Why book with us
- Same prices wherever you are
- Fixed prices from your pictures
- CHAS and Constructionline accredited
- Straight answers about what a repair can do
Read our pricing or resurfacing vs replacement cost guide.
How it works
Here’s how a visit usually runs: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Allow a few hours from start to finish. Before we go, we’ll explain when it can be used and what to avoid for the first few days.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Let us know which floor the room is on
- Tell us about any previous repairs or coatings
- Avoid using the area for a few hours before we arrive
Getting a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Advice
What your bath is made of matters
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
Places near Landywood
Other services in Landywood
When to call us in Landywood
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
People typically call us after spotting one of these:
- Chips caused by builders
- Chips along the edge of the bath
- Hairline or through cracks in acrylic
- Rusty patches near the plughole
What to look for in a quote
- A fixed quote, and whether VAT is included
- Whether the price covers travel
- Who turns up on the day
- What happens if the damage is worse than the pictures show
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Avoid scourers, wire wool and gritty cream cleaners
- Check that an acrylic bath doesn’t move when you stand in it
- Protect the bath with a towel when doing jobs nearby
- Do not leave a fresh chip for long
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath without abrasive products.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Take it off before we arrive.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
What a repair cannot fix
In fairness, there are a few things a repair won’t fix:
- Water coming from the waste or taps rather than the bath
- Metal that has corroded all the way through
- A bath worn all over, where resurfacing makes more sense
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
Common questions in Landywood
Are there extra charges for Landywood?
Travel is included in the price, and we charge the same wherever you are.
Can you redo an old repair?
Yes. We remove the old filler and start again. Mention it when you send photos.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Which areas do you work in?
Across the UK. Our prices are the same everywhere.
When can you do it?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Does someone need to be in?
We need someone to let us in. You don’t need to watch us work.
Is repairing better than replacing?
Generally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
About our accreditations · Every repair comes with a one-year guarantee.
