Bath and North East Somerset · England

Bath chip & crack repair in Lansdown, Bath and North East Somerset

Bath repair for Lansdown, without a refit. Get a fixed quote from your pictures, then book a visit.

  • Repairs from £95
  • Impact holes in acrylic
  • Chips along the edge of the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Lansdown?

What bath repair costs

Repairs from £95. We charge the same across the UK, including Lansdown. What changes the price is:

  • What the surface is made of
  • Doing more than one item at once
  • Unusual colours or finishes
  • Access to the area

Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

How to get a fixed price

We price nearly every job from pictures. This is what we need:

  • Where you are, by postcode
  • The material, if you know it
  • Good light, ideally daylight, without flash glare
  • A clear, close picture of the problem area

For a price in Lansdown, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Bath repair at your home in Lansdown

Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Common call-outs are for impact holes in acrylic and a failed DIY repair that’s discoloured or lifting, in whirlpool & spa baths, cast iron enamel and pressed steel enamel.

A one-year guarantee comes as standard.

Where
Lansdown (BA1, BA2)
Region
Bath and North East Somerset
Guarantee
12 months on all our work
Quotes
From £95. Fixed and free, based on pictures
Call
0345 017 0787
Updated
23 October 2026
Acrylic bath corner rebuilt by Surface Doctor, before and after

What happens on the day

There is not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. Most visits take a morning or an afternoon.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. The colour is mixed on the spot to match your bath.
  4. We apply the finish coats and polish the repair so it blends in.
  5. Once it has cured, normally by the day after, the bath is ready to use.

Getting ready for the visit

  • Tell us about any previous repairs or coatings
  • Have a window or extractor fan available
  • Plan for the room to be out of bounds to pets and children

How to get a price

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

Get a free quote

Related advice

Can I fix it myself?

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

Where we work around Lansdown

Lansdown is about 1 mile north of Bath, in Bath and North East Somerset. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our technicians cover all 136 towns and villages across Bath and North East Somerset. You can also see our page for Birmingham, about 77 miles away.

Our visits in BA1 and BA2 are booked in the same way as anywhere else. We regularly work on streets such as Sion Road, Pera Road and Mount Road and the roads around them. Neighbouring places we cover include Walcot (1 mile south-east), Bathwick (1 mile south-east), Kingsmead (1 mile south-west), Larkhall (1 mile east) and Bath (1 mile south). Within a short drive, we also cover Keynsham (6 miles west), Paulton (8 miles south-west), Peasedown St John (6 miles south-west), Saltford (4 miles west), Timsbury (7 miles south-west) and Combe Down (3 miles south). As one of the bigger places in Bath and North East Somerset, Lansdown sees plenty of our work.

Landmarks near Lansdown

Our customers here include homes close to The Belvedere Wine Vaults pub, Sydney Gardens and Bath Abbey. Also close by are Bath Royal Literary and Scientific Institution (0.8 miles south), St Stephens Church School (under half a mile east), St Mark's CofE School (0.7 miles north-east) and St Stephen's Church (under half a mile south). Lansdown’s nearest station is Bath Spa station, roughly 1.3 miles south. Nearby you will also find Midford Castle (3.2 miles south) and Royal National Hospital for Rheumatic Diseases (1.1 miles west).

  • Nearby schools include Royal School (within half a mile north)
Map of Lansdown © OpenStreetMap contributors

When a repair is not the answer

Honesty matters more than a booking, so here’s what a repair will not do:

  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • A whole bath that is dull or worn, where a full re-enamel is the better fix
  • Acrylic cracks with no access behind them

Not sure? Send photos and we’ll give you a straight answer.

What we work on

  • Acrylic
  • Pressed steel enamel
  • Roll-top & freestanding
  • Cast iron enamel
  • Whirlpool & spa baths

Signs you need bath repair in Lansdown

Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, often before anyone notices. We repair snagging damage like this regularly.

Signs it’s time to call us include:

  • A kit repair that didn’t last
  • A chipped rim or side
  • Holes from dropped items
  • Snagging damage from a refit

Before you book anyone

  • Whether the colour is mixed to match
  • How soon you can use it again
  • How changes to the job are handled
  • Aftercare advice

Choosing a repair company

Should you replace it?

For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Prices start from £95. The price reflects the work involved, not where you live. You will see the full price before you book, with nothing added on the day.

Why choose Surface Doctor in Lansdown

  • A fixed quote before booking
  • Colours mixed by hand to suit your surface
  • CHAS, Constructionline and SafeContractor accredited
  • Nothing taken out or refitted

See our prices page and bath cost comparison.

Lansdown questions

Do you work for landlords and businesses?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Bath and North East Somerset.

How long does the repair take to cure?

Typically the day after. We’ll tell you the exact curing time when we finish.

Do you charge for travel?

We do not add a call-out fee. Your fixed quote includes everything.

Can you redo someone else’s repair?

In most cases. The old repair comes out first, so let us know about it.

Can I get a quote without a visit?

Nearly always. If photos do not show enough, we will ask for another angle.

Can you redo an old repair?

Yes. We take out the old repair and do it properly. Mention it when you send photos.

Can you repair a hole in a bath?

Often, if there is access underneath. We back the hole, fill it and refinish the surface.

Do you work in Lansdown?

Yes. We work across the UK and come to Lansdown and the rest of Bath and North East Somerset. Send pictures and we will quote, or call 0345 017 0787.

Different materials, different repairs

Composite and resin

Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.

Cast iron

Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.

Looking after it afterwards

After the repair has cured, a few habits help it last:

  • Don’t leave a fresh chip for long
  • Clean with warm water and a mild detergent
  • Fix dripping taps early to stop staining and limescale
  • Don’t leave razors or cans standing in the bath

There’s nothing special to do after a repair. Skip bleach and gritty creams and rinse after use.

Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Take it off before we arrive.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.