Bath and North East Somerset · England

Bath chip & crack repair in Peasedown St John, Bath and North East Somerset

Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Peasedown St John. Free, fixed quotes from your photos.

  • Repairs from £95
  • A cracked acrylic bath
  • Holes from dropped items
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Peasedown St John

Bath repair in Peasedown St John, done in place

We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath and the tiles around it. Most baths can be used again the day after. Typical jobs include snagging damage from a refit and impact holes in acrylic, across whirlpool & spa baths, cast iron enamel and pressed steel enamel.

The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.

Broken acrylic bath corner, rebuilt and refinished (before and after)
Location
Peasedown St John (BA2)
Area hub
Bath and North East Somerset
Cover
A year, on every repair
Quote
From £95. Fixed and free, based on photos
Call
0345 017 0787
Updated
23 October 2026

Peasedown St John: your questions answered

Will there be a smell?

A little, depending on the job. Ventilation keeps it to a minimum.

How soon can you come?

Your quote comes with available dates. Tell us if you need it done quickly.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.

Do you repair coloured baths?

Yes, we match coloured baths too. We tint the finish to your bath on site.

Can you repair a crack in an acrylic bath?

Often, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.

Can you quote from pictures?

In nearly every case. If pictures do not show enough, we will ask for another angle.

Can you repair a hole in a bath?

Frequently, if there’s access underneath. We back the hole, fill it and refinish the surface.

What happens if you find more damage?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

Materials and what they mean for the repair

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.

Composite and resin

Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.

Do you need bath repair in Peasedown St John?

Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. We repair snagging damage like this regularly.

Typical reasons for a call-out include:

  • A hole punched through by something heavy
  • A chip where the taps sit
  • An old repair that has yellowed or come loose
  • Scuffs and scratches in the surface

Comparing quotes

  • Who will actually do the work
  • The length of the guarantee and what it covers
  • How the colour is matched
  • If travel is included in the price

10 questions to ask before you book

Honest limits

To be straight with you, some problems need a different fix:

  • Water coming from the waste or taps rather than the bath
  • Cracks in acrylic we cannot reach from underneath
  • A bath worn all over, where resurfacing makes more sense

Send us photos and we’ll tell you honestly.

What we work on

  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Pressed steel enamel
  • Acrylic
  • Cast iron enamel

DIY repairs versus a professional job

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.

What happens on the day

You don’t need to empty the room beforehand. We bring everything we need with us, put protection down and start once you’re happy with the plan. It normally takes a few hours, depending on the damage, and you are welcome to carry on with your day while we work.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, generally the day after.

Getting ready for the visit

  • Make sure the room can be ventilated
  • Let us know which floor the room is on
  • Let the surface dry out before the visit

Get a quote

There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.

Get a fixed quote

Related advice

How we price bath repair

Repairs from £95. There is no area surcharge for Peasedown St John. What changes the price is:

  • Whether it’s a chip, crack, burn or wear
  • Unusual colours or finishes
  • The material
  • The size and number of damaged areas

We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Send photos for a quote

It only takes a minute to photograph the damage, and it saves a visit. Try to send:

  • The postcode, so we can plan the visit
  • Any details about the material
  • One sharp close-up of the damage
  • One picture of the entire bath

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.

Our work in Peasedown St John

Peasedown St John is about 3 miles north-east of Midsomer Norton, in Bath and North East Somerset. Customers in Peasedown St John get the same service as everywhere else we cover: a fixed quote from your pictures, and a technician at your door on the day. Peasedown St John is one of 136 places in Bath and North East Somerset we cover.

Here we cover the BA2 postcode area. We regularly work on streets such as Church Road, Belle Vue Close and French Close and the roads around them. We also travel to Carlingcott (1 mile north-west), Double Hill (1 mile east), Shoscombe (1 mile south-east), Wicklane (1 mile west) and Withyditch (1 mile north). Within a short drive, we also cover Bath (5 miles north-east), Keynsham (7 miles north-west), Bathwick (6 miles north-east), Walcot (6 miles north-east), Westmoreland (5 miles north) and Kingsmead (5 miles north-east).

Around Peasedown St John

We visit homes around Waggon & Horses pub, St John's Church and Writhlington School and the streets around them. Peasedown St John’s nearest station is Oldfield Park station, about 4.8 miles north of the centre. Further afield, we also cover the area around Midford Castle (4.1 miles north-east) and Paulton Memorial Hospital (3.3 miles west). Open spaces near Peasedown St John include Stephen's Vale Nature Reserve and Hunstrete Lake.

Map of Peasedown St John © OpenStreetMap contributors

Work for landlords and builders

We work for landlords, letting agents and housing providers in Peasedown St John as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

We carry out planned and one-off repairs for housing associations and facilities teams in Bath and North East Somerset and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

Looking after it afterwards

A little care keeps the finish looking good. Our advice:

  • Keep metal cans and razors off the surface
  • Give the bath a quick rinse after use
  • A dripping tap stains enamel, so fix it early
  • If an acrylic bath flexes, have its feet adjusted

Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.

A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.