Inverclyde · Scotland
Bath Repair in Wemyss Bay
Local bath repair for Wemyss Bay: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Holes from dropped items
- A chip where the taps sit
About our bath repair in Wemyss Bay
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We work on whirlpool & spa baths, roll-top & freestanding and cast iron enamel, and the jobs we see most are scuffs and scratches in the surface and chips along the edge of the bath.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Wemyss Bay (PA18)
- County
- Inverclyde
- Guarantee
- A year, on every repair
- Price
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Signs you need bath repair in Wemyss Bay
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
Customers typically contact us about:
- Rust spots around the plughole
- Deep scratches in acrylic
- A failed DIY repair that’s discoloured or lifting
- Impact holes in acrylic
Comparing quotes
- If travel is included in the price
- How the room is protected while they work
- Whether cleaning and preparation are in the price
- When it can be used again
Other services in Wemyss Bay
Wemyss Bay and nearby
Wemyss Bay is about 6 miles south-west of Greenock, in Inverclyde. Wherever you are in the PA18 postcode area, a technician comes to you. Our repair technicians cover all 19 towns and villages across Inverclyde. You can also see our page for Glasgow, about 24 miles away.
All of PA18 is covered. Streets in the area include Lomond Road, Elm Walk and Ryan Road, and we cover them all. Other places close to Wemyss Bay include Skelmorlie (1 mile south), Inverkip (2 miles north-east), Innellan (3 miles west), Toward (4 miles west) and Bullwood (4 miles north-west). Further out, we also cover Greenock (6 miles north-east), Port Glasgow (9 miles east), Gourock (5 miles north-east), Cartsdyke (7 miles north-east), Kilmacolm (10 miles east) and Mid Auchinleck (9 miles east).
Around Wemyss Bay
Typical jobs here are in homes near St Josephs Church. The closest station to Wemyss Bay is Wemyss Bay station, about 0.8 miles south of the centre. Nearby you’ll also find Skelmorlie Castle (2.5 miles south) and Ravenscraig Hospital (5 miles north-east). Not far away are Creuch Hill.
Questions from Wemyss Bay
How much does bath repair cost in Wemyss Bay?
Repairs from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Can rust on a bath be repaired?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit generally costs less than separate visits. Include pictures of each item.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Is my repair covered?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
What bath repair costs
Repairs from £95. You won’t pay by the hour. The price is based on:
- How many areas need work
- Access to the area
- Any earlier repairs that need removing first
- How many items we do on one visit
There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
Good photos mean an accurate price. Here’s what helps:
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
- Any details about the material
- One picture of the whole bath
For a price in Wemyss Bay, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Landlords, agents and businesses in Wemyss Bay
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Landlords, letting agents and housing providers in Wemyss Bay use us as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
Honest limits
Before booking, it’s worth knowing the limits too:
- Leaking fittings, which need a plumber
- Acrylic cracks with no access behind them
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Not sure? Send photos and we will give you a straight answer before you book.
Surfaces we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Acrylic
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
What we do, step by step
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a morning or an afternoon. We clean up when we are done and let you know when you can use it again.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the day after.
Before we arrive
- Keep a parking space free if you can
- Keep children and pets away from the room on the day
- Clear the area around the damage
Ask for a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
Keeping it looking good
To keep it looking its best:
- Put a towel in the bath if you’re working above it
- Rinse it down after each bath
- A dripping tap stains enamel, so fix it early
- Stick to mild cleaners and a soft cloth
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.
A small chip is a quick job. Left alone, they stain and can rust, so early repair saves time and money.
About our accreditations · Every repair comes with a one-year guarantee.
