Falkirk · Scotland
Bath chip & crack repair in Laurieston, Falkirk
Fixed-price bath repair in Laurieston and the surrounding area, generally in one visit.
- Repairs from £95
- Damage beneath the taps
- A failed DIY repair that’s discoloured or lifting
Bath repair at your home in Laurieston
A typical bath repair is a few hours’ work, and the bath is back in use the following day. You won’t need a plumber or tiler, because the bath doesn’t move. Typical jobs include chips under the taps and chips on the rim or sides, on whirlpool & spa baths, cast iron enamel and pressed steel enamel.
Whatever the size of the job, you get the same one-year guarantee in Laurieston and across Falkirk.
- Where
- Laurieston (FK2)
- County
- Falkirk
- Cover
- A year, on every repair
- Quote
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What affects the price in Laurieston
Repairs from £95. We price every job individually, from your pictures. What matters most is:
- The size and number of damaged areas
- How easy the damage is to reach
- How hard the colour is to match
- The material
The price reflects the work involved, not where you live. You will see the full price before booking.
How to get a fixed quote
Two or three clear photos are typically enough. Try to include:
- One sharp close-up of the damage
- What it’s made of, if you know
- One picture of the entire bath
- Daylight if possible, and no flash reflection
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and you are under no obligation.
When we’d advise against a repair
A repair isn’t right for every job, including:
- Metal that has corroded all the way through
- Cracks in acrylic we cannot reach from underneath
- Leaks from the waste or overflow fittings (a plumber’s job)
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Cast iron enamel
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Where we work around Laurieston
Laurieston is about 1 mile south-west of Grangemouth, in Falkirk. Whether you’re in the middle of Laurieston or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover all 50 towns and villages in Falkirk. We work right across the region, from Laurieston to Edinburgh (21 miles away).
Postcode districts we cover here: FK2. Whether you live on James Street, Mary Street and School Road or anywhere nearby, a technician can come to you. Close by, we cover Westquarter (1 mile south-east), Redding (1 mile south-east), Reddingmuirhead (1 mile south), Hallglen (1 mile south-west) and Wallacestone (1 mile south). Further out, we also cover Bo'ness (6 miles east), Larbert (4 miles north-west), Stenhousemuir (3 miles north-west), Denny (7 miles west), Bonnybridge (5 miles west) and Kinneil (5 miles east).
Local landmarks in Laurieston
Locally, our jobs take us to homes close to Graeme High School, Beancross Primary School and Christ Church Episcopal Church and the streets around them. For rail, the closest station is Polmont station, about 1.5 miles south-east of the centre. Nearby you’ll also find Carribber Castle (4.3 miles south-east) and Falkirk Community Hospital (1.7 miles west). Open spaces near Laurieston include Callendar Lake.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
For landlords and businesses
We regularly work with letting and managing agents. Just send photos, the address and how to get access.
We carry out planned and one-off repairs for housing associations and facilities teams in Falkirk and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
What we are called out for in Laurieston
Heavy toiletries are the biggest single cause of chips, with dropped shower heads close behind. Fittings cause damage too: water collects there, so chips nearby rust quickly.
Signs it’s time to call us include:
- A failed DIY repair that’s discoloured or lifting
- Impact holes in acrylic
- Rusty patches near the plughole
- A chipped rim or side
What your quote should include
- Is the price fixed, and does it include VAT?
- When it can be used again
- Who will actually do the work
- What protection goes down before work starts
Why repair rather than replace?
Replacing a fitted bath normally involves a plumber, lifting out the old bath, making good the tiles and panel and disposing of the old one. A repair deals only with the damage in one visit. Repairs from £95, with every job priced individually. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Why book with us
- Typically one visit, start to finish
- Work done at your home or business
- Everything repaired in place
- CHAS and Constructionline accredited
Read our pricing and bath cost comparison.
Questions from Laurieston
Can you repair a hole in a bath?
Generally. Send us a photo of the hole and one from under the bath if you can.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted before the end of a tenancy.
What if the damage is worse than the photos show?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
Can you repair several things at once?
Yes, and it’s often cheaper. Send pictures of everything together and you’ll get one combined price.
What happens next?
We check the damage, the material and your postcode, then reply with a quote with dates.
Is a cracked acrylic bath repairable?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
What about rust by the waste?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
What happens on the day
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes two to three hours for most chips, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, usually by the following day, the bath is ready to use.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Mention if the room is upstairs or in a flat
- Have a window or extractor fan available
Getting a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Advice
Places near Laurieston
Also in Laurieston
About our accreditations · Every repair comes with a one-year guarantee.
