Essex · England
Bath chip & crack repair in Layer-de-la-Haye, Essex
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Layer-de-la-Haye, with a one-year guarantee on every repair.
- Repairs from £95
- A cracked acrylic bath
- Rusty patches near the plughole
Bath repair in Layer-de-la-Haye, done in place
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands with a one-year guarantee. Typical jobs include damage beneath the taps and rusty patches near the plughole, across pressed steel enamel, roll-top & freestanding and acrylic.
A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.
- Where
- Layer-de-la-Haye (CO2)
- Region
- Essex
- Warranty
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Questions from Layer-de-la-Haye
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Will the price change on the day?
Your quote covers the damage in the pictures. If there is more, we will tell you before starting.
Can you redo an old repair?
Regularly. We strip it out, deal with any rust and repair it again.
Is there a call-out fee?
There is no separate call-out charge. The fixed price covers the visit and the work.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
How invisible is a bath repair?
On a glossy bath, you will struggle to find it. On worn enamel, it can look shinier than the rest.
Do the materials smell?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
About Layer-de-la-Haye
Layer-de-la-Haye is about 3 miles south-west of Colchester, in Essex. We agree a date that works for you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Layer-de-la-Haye is one of 644 places in Essex we cover. Our nearest city page is London, about 47 miles away.
Jobs in CO2 work the same way as everywhere else we cover. Local streets include Church Road, Green Acres Road and Old Forge Road, and we cover them all. We also cover the places around Layer-de-la-Haye: Malting Green (1 mile east), Birch (2 miles west), Birch Green (2 miles west), Heckfordbridge (2 miles north-west) and Layer Breton (2 miles south-west). We also work in nearby towns such as Colchester (3 miles north-east), Braintree (13 miles west), Clacton-on-Sea (13 miles east), Maldon (11 miles south-west), Witham (10 miles west) and Camulodunum (3 miles north).
Near you in Layer-de-la-Haye
Our clients here include homes close to Church of St John the Baptist, Alderman Blaxill School and The Fox Public House. Layer-de-la-Haye’s nearest station is Colchester Town station, about 3.4 miles north-east. Further afield, we also cover the area around Essex County Hospital (3.1 miles north-east) and Social History Museum (3.4 miles north-east). The countryside around Layer-de-la-Haye includes Roman River Valley.
Signs you need bath repair in Layer-de-la-Haye
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the base flex.
Customers typically contact us about:
- Rusty patches near the plughole
- Deep scratches in acrylic
- Chips along the edge of the bath
- A failed DIY repair that is discoloured or lifting
What your quote should include
- Whether the colour is mixed to match
- What protection goes down before work starts
- How long it needs to cure
- How long the guarantee is and what it covers
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
Why repair rather than replace?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, a new panel is often needed, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Our bath repair starts from £95. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why us?
- No need to remove anything
- Rooms protected and left tidy
- We will tell you if it’s not worth repairing
- Colour mixed on the day to match
Read our full price list and bath cost comparison.
How to care for the repair
After the repair has cured, a few habits help it last:
- Cover the bath during DIY or decorating
- If an acrylic bath flexes, have its feet adjusted
- Do not leave razors or cans standing in the bath
- Fix dripping taps early to stop staining and limescale
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine without abrasive products.
Don’t leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
What bath repair costs
Repairs from £95. We charge the same across the UK, including Layer-de-la-Haye. What changes the price is:
- Where the damage is and how we get to it
- The size and number of damaged areas
- Previous DIY repairs that have to come out
- The material
There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from photos
Most quotes are done from photos alone. To help us price it:
- A coin or ruler next to the damage for scale
- A picture taken from further back
- Any earlier repairs or coatings
- What it’s made of, if you know
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
What we do, step by step
Visits start with a quick look at the job together. After that, protection goes down around the work area and the work begins. It normally takes two to three hours for most chips.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
Preparing for the visit
- Make sure the room can be ventilated
- Clear the area around the damage
- Let us know if it has been repaired before
How to get a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Advice
What your bath is made of matters
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
Places near Layer-de-la-Haye
More services for Layer-de-la-Haye
Landlords, agents and businesses in Layer-de-la-Haye
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
About our accreditations · Every repair comes with a one-year guarantee.
