County Durham · England
Bath chip & crack repair in Leadgate, County Durham
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Leadgate, with a one-year guarantee on every repair.
- Repairs from £95
- Rusty patches near the plughole
- A kit repair that didn’t last

Bath repair in Leadgate without replacing anything
A typical bath repair is a few hours’ work, and the bath is back in use the day after. There’s no need to book a plumber or tiler, because nothing is disconnected. We work on roll-top & freestanding, whirlpool & spa baths and pressed steel enamel, and people most often call us about chips caused by builders and a cracked acrylic bath.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Where
- Leadgate (DH8)
- Region
- County Durham
- Warranty
- One year on every repair
- Price
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026

Our work in Leadgate
Leadgate is about 1 mile east of Consett, in County Durham. We travel to clients in Leadgate, so you don’t need to take anything anywhere. Leadgate is one of 329 towns and villages in County Durham we cover. Our jobs stretch from Leadgate to Newcastle upon Tyne (about 11 miles away).
Postcode districts we cover here: DH8. Local streets include Coniston Way, St Ives Gardens and Railway Street, all of which we cover. If you are just outside Leadgate, we cover Crookhall (1 mile south-west), Delves Lane (1 mile south), Blackhill (1 mile west), Consett (1 mile west) and Medomsley (2 miles north). We also work in nearby towns such as Durham (11 miles south-east), Bishop Auckland (15 miles south), Spennymoor (14 miles south-east), Chester-le-Street (9 miles east), Stanley (5 miles east) and Crook (10 miles south).
What’s near Leadgate
Locally, our jobs take us to homes close to Church of St Ives, Leadgate Primary School - Split Site and Blackhill and Consett Park. Further afield, we also cover the area around Shotley Bridge Hospital (1.6 miles west) and Derwentside (1.9 miles east). Not far away are Currock Hill.
Repair or replace in Leadgate?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it takes one visit, and the bathroom stays exactly as it is. Prices start from £95. Our prices are the same across the UK, with no extra for Leadgate. What changes the price is the job itself: the material, the amount of damage and how many items.
Why choose Surface Doctor in Leadgate
- Fixed prices from your photos
- Colours mixed by hand to suit your surface
- No extra charge for your area
- No need to remove anything
Read our prices page or guide to resurfacing and replacement costs.
For landlords and businesses
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
What bath repair costs
Prices start from £95. We do not charge extra for travel to Leadgate. The price depends on:
- Whether old repairs or coatings need taking off
- How easy the damage is to reach
- The material
- The type of damage
There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your photos
When you take your photos, these tips help us give you a firm price:
- Any details about the material
- Your postcode, so we can check dates
- A picture taken from further back
- Natural light rather than flash
Send us a photo of the damage and a wider shot of the whole item, and tell us you are in Leadgate, and we will come back with a fixed quote.
How the visit works
Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes a few hours, depending on the damage, and we finish with a tidy-up and a look at the finished work together.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, usually the following day.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Have somewhere for us to park nearby if possible
- Let us know about parking or access
Getting a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Related advice
Questions from Leadgate
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
Which areas do you work in?
The whole UK, including all of County Durham. Send your postcode with your pictures and we’ll confirm dates.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Is a cracked acrylic bath repairable?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
How long before I can use the bath?
Most baths can be used the next day. We confirm the time before we leave.
Will the repair last?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Can you match an avocado or pink bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Towns and villages near Leadgate
What else we do in Leadgate
What we cannot put right
A repair is not always the answer, and we would rather say so up front. Repairs won’t solve:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Leaking fittings, which need a plumber
- Flexing caused by a failed cradle or loose feet
If in doubt, send photos and we will say what we think before booking.
What we work on
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
What we’re called out for in Leadgate
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
It’s worth getting a quote if you see:
- Rust spots around the plughole
- Snagging damage from a refit
- Deep scratches in acrylic
- Cracks in an acrylic bath
Questions to ask before you book
- The length of the guarantee and what it covers
- Is the price fixed, and does it include VAT?
- What protection goes down before work starts
- What prep work is covered
About our accreditations · Every repair comes with a one-year guarantee.

