County Durham · England

Bath Repair in Medomsley

Damaged bath in Medomsley? We repair it in place, mix the colour on the day and guarantee the work for a year.

  • Repairs from £95
  • A chip where the taps sit
  • Chips caused by builders
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Medomsley

About our bath repair in Medomsley

Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. Nothing is unplumbed, the tiles are not touched, and the repaired area is colour matched so it blends in. Typical jobs include deep scratches in acrylic and rust by the waste and overflow, across acrylic, roll-top & freestanding and cast iron enamel.

Every repair comes with our one-year guarantee.

Location
Medomsley (DH8)
Area hub
County Durham
Guarantee
A year, on every repair
Quote
From £95. Free, fixed price from pictures
Call
0345 017 0787
Last updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

When to call us in Medomsley

Glass and heavy bottles cause more chips than anything else. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.

The most common problems we’re called about are:

  • Damage done while the bathroom was being fitted
  • Rust spots around the plughole
  • Impact holes in acrylic
  • Cracks in an acrylic bath

What to look for in a quote

  • Whether cleaning and preparation are in the price
  • Whether they match the colour on site
  • What the guarantee covers, and for how long
  • What happens if they find more damage

How to compare quotes

Materials and what they mean for the repair

Acrylic

Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.

Cast iron

Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.

What a repair can’t fix

It helps to know what we can’t do:

  • Water coming from the waste or taps rather than the bath
  • A steel bath rusted through
  • Cracks in parts of an acrylic bath we can’t get to from below

If in doubt, send photos and we’ll say what we think before you book.

Materials we repair

  • Pressed steel enamel
  • Acrylic
  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Cast iron enamel

How the visit works

You don’t need to empty the room. We bring everything we need with us, put protection down and start once you are happy with the plan. It normally takes a morning or an afternoon, and you’re welcome to carry on with your day while we work.

  1. We start by cleaning the damage and taking out loose enamel and rust.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. Finish coats go on, then the repair is polished to blend in.
  5. Once it has cured, usually by the day after, the bath is ready to use.

Getting ready for the visit

  • Have a window or extractor fan available
  • Let us know which floor the room is on
  • Avoid using the area for a few hours before we arrive

Getting a price

For a price in Medomsley, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Get a fixed price

Read more

How we price bath repair

Repairs from £95. We price every job individually, from your pictures. The main factors are:

  • The material
  • How many areas need work
  • Whether old repairs or coatings need taking off
  • The type of damage

We do not add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Send pictures for a quote

You can take the photos on your phone, there is no need for anything special. Make sure they show:

  • Any details about the material
  • A close-up of the damage, in focus
  • A coin beside the damage so we can judge size
  • Daylight if possible, and no flash reflection

Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and you’re under no obligation.

Repair or replace: which is better?

A new bath brings a chain of other jobs: tiles along the rim usually crack when it comes out, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Our bath repair starts from £95. A repair is priced on what needs doing, not where you live. You will see the full price before you book.

Why choose Surface Doctor in Medomsley

  • No extra charge for your area
  • Rooms protected and left tidy
  • Free fixed quotes from pictures
  • Honest advice, even when it means no job

Take a look at our pricing and resurfacing vs replacement cost guide.

Keeping it looking good

It’s all simple stuff, just a few sensible habits:

  • Do not scrub with anything abrasive
  • A dripping tap stains enamel, so fix it early
  • Ensure an acrylic bath is firm underfoot
  • Put a towel in the bath if you’re working above it

Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.

Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.

Where we work around Medomsley

Medomsley is about 2 miles north-east of Consett, in County Durham. We agree a date that works for you, and you’ll know when to expect us, so there is no waiting around. Medomsley is one of 329 places in County Durham where we work. Our nearest city page is Newcastle upon Tyne, about 10 miles away.

We work across DH8 and the streets around it. We regularly work on streets such as Hunters Close, North Magdalene and Manor Road. We also travel to Medomsley Edge (1 mile west), Broom Hill (1 mile west), High Westwood (1 mile north), East Law (1 mile west) and Ebchester (1 mile north-west). Within a short drive, we also cover Durham (12 miles south-east), Spennymoor (15 miles south-east), Chester-le-Street (9 miles east), Stanley (5 miles east), Crook (12 miles south) and Birtley (10 miles east).

Local landmarks in Medomsley

Typical jobs here are in homes near Church of St Mary Magdalene, Derwent Walk Inn and Bishop Ian Ramsey CofE Primary School. Further afield, we also cover the area around Shotley Bridge Hospital (1.6 miles south-west) and Derwentside (2.4 miles south-east). The countryside around Medomsley includes Currock Hill.

Map of Medomsley © OpenStreetMap contributors

DIY repairs versus a professional job

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.

Medomsley: your questions answered

How much does bath repair cost in Medomsley?

Repairs from £95. Because every job differs, we price from photos. You’ll get a fixed figure before booking.

I’m a tenant. Can you help?

We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.

Can you repair a hole in a bath?

Usually, yes, if we can reach behind it. The hole is backed, filled and refinished to match.

Can you price it without visiting?

Typically, yes. A close-up and a wider photo are enough to give a fixed quote.

Can you match an avocado or pink bath?

Yes, we match coloured baths too. The colour is tinted by hand on the day.

Are there extra charges for Medomsley?

Travel is included in the price, and we charge the same wherever you are.

Do you come to Medomsley?

Yes, we do. Repair technicians travel to Medomsley from across the region, with no extra charge for travel.

What about rust by the waste?

Yes, very often. The rust is cut back to clean metal and sealed before we fill and finish it.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.