Lincolnshire · England
Bath chip & crack repair in Leasingham, Lincolnshire
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Leasingham and across Lincolnshire. Send photos for a free, fixed quote.
- Repairs from £95
- A failed DIY repair that’s discoloured or lifting
- Holes from dropped items
How we handle bath repair in Leasingham
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. Nothing is unplumbed, the tiles aren’t touched, and the repaired area is colour-matched so it blends in. Whether it’s cracks in an acrylic bath and chips caused by builders, we can normally put it right, on roll-top & freestanding, whirlpool & spa baths and pressed steel enamel alike.
All our work comes with a one-year guarantee, wherever you are in Lincolnshire.
- Location
- Leasingham (NG34)
- County
- Lincolnshire
- Warranty
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What a repair cannot fix
In fairness, some problems need a different fix:
- A bath that moves underfoot, until its support is fixed
- Wear across the entire surface, which needs re-enamelling
- Cracks in parts of an acrylic bath we can’t get to from below
Not sure? Send photos and we will give you a straight answer before you book.
What we work on
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
Also near Leasingham
What else we do in Leasingham
Should you replace it?
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it’s done in one visit, and the bathroom stays exactly as it is. Prices start from £95. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Why Leasingham customers choose us
- CHAS, Constructionline and SafeContractor accredited
- Fixed prices from your photos
- Honest advice, even when it means no job
- Everything repaired in place
Take a look at our full price list or guide to resurfacing and replacement costs.
Our work in Leasingham
Leasingham is about 2 miles north of Sleaford, in Lincolnshire. Across the NG34 area, a technician comes to you. We work in 732 places across Lincolnshire, from the larger towns to small villages. You can also see our page for Leeds, about 71 miles away.
Our visits in NG34 are booked in the same way as anywhere else. We regularly work on streets such as The Square, Washdyke Lane and St Andrews Crescent. Nearby, we also work in Holdingham (1 mile south), Ruskington (2 miles north-east), Cranwell (2 miles west), Sleaford (2 miles south) and Evedon (3 miles east). Larger places within reach include Lincoln (15 miles north), Grantham (12 miles south-west), North Hykeham (13 miles north-west), Birchwood (15 miles north-west), Woodhall Spa (12 miles north-east) and Hykeham (13 miles north-west).
What’s near Leasingham
Locally, our jobs take us to homes close to Lollycocks Field, Church of St Andrew and Carre's Grammar School, among other places. The closest station to Leasingham is Ruskington station, roughly 2.1 miles north-east of the centre. Well-known places in the area include Cranwell Aviation Heritage Museum (2.4 miles west) and Sleaford Castle (2 miles south).
- Other local spots include Cranwell and Byard's Leap (2.6 miles west)
Common problems we fix in Leasingham
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the bath move until it cracks.
Send us a picture if you notice any of these:
- A hole punched through by something heavy
- Rust by the waste and overflow
- Scratches you can feel with a fingernail
- Chips along the edge of the bath
Before you book anyone
- Whether a trained technician does the job
- How the room is protected while they work
- When it can be used again
- What preparation is included
Prices and what affects them
Prices start from £95. We don’t charge extra for travel to Leasingham. The price depends on:
- How many items we do on one visit
- Access to the area
- Whether it’s a chip, crack, burn or wear
- How much damage there is
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
The better the photos, the more accurate the price. Here’s what we find most useful:
- Something in shot to show the size
- Any details about the material
- A picture taken from further back
- A clear, close picture of the problem area
Upload a photo of the damage and one of the entire item, and tell us you are in Leasingham, and we’ll reply with a fixed quote.
Can I fix it myself?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Your questions about bath repair in Leasingham
Is a bath repair durable?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Can you repair a hole in a bath?
Generally. Send us a picture of the hole and one from under the bath if you can.
What happens next?
We review the pictures and send a fixed quote with dates.
Can you quote from pictures?
In nearly every case. If pictures do not show enough, we will ask for another angle.
Can you repair a crack in an acrylic bath?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Do you cover the entire of Lincolnshire?
We work UK-wide, and that includes Leasingham. Our prices are the same everywhere.
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Is the work guaranteed?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
How the visit works
We agree an arrival time beforehand, so you’re not left guessing. On site, it takes a few hours, depending on the damage in most cases. We leave the room clean and ready to use once it has cured.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the day after.
Preparing for the visit
- Clear the area around the damage
- Have a window or extractor fan available
- Let us know which floor the room is on
How to get a price
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed price back. There is no charge for the quote and no obligation.
Advice
Work for landlords and builders
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will arrange it.
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
About our accreditations · Every repair comes with a one-year guarantee.
