Kent · England
Bath Repair for Lenham homes
Our technicians come to Lenham for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Rust spots around the plughole
- A cracked acrylic bath
Repairing versus replacing in Lenham
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it’s done in one visit, and nothing else in the room changes. Prices start from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why us?
- Colour-matched on site
- Accredited with CHAS, Constructionline and SafeContractor
- One price list for the entire UK
- Everything repaired in place
Read our full price list or resurfacing vs replacement cost guide.
About our bath repair in Lenham
Chips, cracks, rust spots and small holes is repaired in place. There is no plumbing to disconnect, your tiles stay as they are, and the repaired area is colour matched so it blends in. If you’re dealing with impact holes in acrylic and chips along the edge of the bath, we can usually put it right.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Lenham (ME17)
- Region
- Kent
- Warranty
- One year on every repair
- Price
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Our work in Lenham
Lenham is about 7 miles south of Sittingbourne, in Kent. Our repair technicians come to homes and businesses in Lenham and nearby villages, so there is no workshop to go to. We work in 922 places across Kent, from the larger towns to small villages. Our nearest city page is London, about 39 miles away.
Jobs in ME17 work the same way as everywhere else we cover. That includes homes on High Street, Mitchell Close and Hatch Road. Close by, we cover Leadingcross Green (1 mile south), Woodside Green (1 mile north-east), West Street (1 mile north-east), Lenham Forstal (2 miles south-east) and Lenham Heath (2 miles south-east). Within a short drive, we also cover Maidstone (8 miles west), Ashford (9 miles south-east), Sittingbourne (7 miles north), Faversham (9 miles north-east), Minster (13 miles north) and Kings Hill (13 miles west).
Landmarks near Lenham
Around Lenham, we work in homes near St Mary's Church, Kiln Wood and The Lenham School, among other places. Nearby too are The Red Lion pub (within half a mile east) and Lenham Primary School (less than half a mile north-west). There’s a railway station in Lenham itself: Lenham station. Other landmarks nearby include Coldbridge Castle (2.7 miles south) and The Dog Collar Museum (3.6 miles west).
How we price bath repair
Prices start from £95. We charge the same across the UK, including Lenham. What changes the price is:
- How easy the damage is to reach
- Unusual colours or finishes
- Whether we combine several jobs
- The size and number of damaged areas
What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Send photos for a quote
We price nearly every job from photos. This is what we need:
- One picture of the entire bath
- Your postcode, so we can check dates
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
The quickest way to a price is to send a couple of photos using our quote form or call us. We will say straight away whether it can be repaired.
Do you need bath repair in Lenham?
A cracked acrylic bath typically wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the base flex until the acrylic gives way.
The most common problems we are called about are:
- A failed DIY repair that’s discoloured or lifting
- A chipped rim or side
- Cracks in an acrylic bath
- Scuffs and scratches in the surface
What your quote should include
- Whether they match the colour on site
- What happens if the damage is worse than the photos show
- How long it needs to cure
- What aftercare is recommended
Also near Lenham
Other services in Lenham
Common questions in Lenham
Do you cover the whole of Kent?
We work UK-wide, and that includes Lenham. Our prices are the same everywhere.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
What happens after I send pictures?
We review the pictures and send a fixed quote.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
Materials and what they mean for the repair
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
How to look after the repair
A little care keeps the finish looking good. We recommend:
- Protect the bath with a towel when doing jobs nearby
- Clean with warm water and a mild detergent
- Avoid scourers, wire wool and gritty cream cleaners
- Fix dripping taps early to stop staining and limescale
Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
When a repair isn’t the answer
We won’t take on work that won’t last, so these are the limits:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A bath worn all over, where resurfacing makes more sense
- Water coming from the waste or taps rather than the bath
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Lenham
- Pressed steel enamel
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
What happens on the day
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job usually takes a few hours. We clean up when we’re done and let you know when you can use it again.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Ensure the room can be ventilated
- Plan for the room to be out of bounds to pets and children
- Mention if the room is upstairs or in a flat
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
