Fife · Scotland
Bath chip & crack repair in Letham, Fife
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Letham. Send pictures for a free, fixed quote.
- Repairs from £95
- Deep scratches in acrylic
- A failed DIY repair that is discoloured or lifting
Bath repair at your home in Letham
You do not need a new bath because of a chip. Our technicians fill, shape and refinish the damage, with the colour mixed on site so the repair is hard to spot. If you are dealing with cracks in an acrylic bath and chips on the rim or sides, we can help, whatever the material.
Every job is backed for twelve months. We return to put right any problem with the work.
- Location
- Letham (KY15)
- Region
- Fife
- Guarantee
- A year, on every repair
- Quote
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Signs you need bath repair in Letham
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
If you can see any of these, send us a photo:
- Damage done while the bathroom was being fitted
- Deep scratches in acrylic
- A cracked acrylic bath
- A hole punched through by something heavy
What to look for in a quote
- What preparation is included
- What happens if the damage is worse than the pictures show
- Who turns up on the day
- Is the price fixed, and does it include VAT?
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- A bath that moves underfoot, until its support is fixed
- A bath worn all over, where resurfacing makes more sense
- Cracks in acrylic we can’t reach from underneath
If in doubt, send pictures and we’ll say what we think before you book.
What we work on
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
Your questions about bath repair in Letham
Can you repair a chip on a coloured bath?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you price it without visiting?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
Can you repair something that’s been repaired before?
Yes, we frequently do. Removing the old work can add time, and that’s in the quote.
What happens once I’ve sent photos?
We review the pictures and send a fixed quote with dates.
Can a cracked acrylic bath be fixed?
Generally, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a picture.
Can rust on a bath be repaired?
Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.
Can you repair a failed DIY repair?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
How we price bath repair
Repairs from £95. A fixed quote means you know the cost before you book. We look at:
- Unusual colours or finishes
- How many items we do on one visit
- The type of damage
- How many areas need work
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
Two or three clear photos are normally enough. Try to include:
- Whether it’s been repaired or coated before
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Letham and the surrounding area
Letham is about 9 miles north of Glenrothes, in Fife. Book a date that suits you, and we will give you an arrival time in advance, so you are not left waiting in all day. Letham is one of 133 places in Fife we cover. Our nearest city page is Edinburgh, about 26 miles away.
All of KY15 is within our area. You’ll find streets such as Monimail Road, School Brae and The Row. If you’re just outside Letham, we cover Springfield (3 miles south-east), Ladybank (3 miles south), Lindores (3 miles north-west), Pitlessie (3 miles south-east) and Cupar Muir (3 miles east). We also work in nearby towns such as Kirkcaldy (13 miles south), Glenrothes (9 miles south), Leven (9 miles south-east), St Andrews (12 miles east), Dysart (13 miles south) and Cupar (4 miles east).
Local landmarks in Letham
Around Letham, we work in homes near Monimail Parish Church and the streets around them. For rail, the closest station is Ladybank station, about 2.9 miles south. Well-known places in the area include The Museum of Cipher Equipment (3.8 miles north-east) and Fernie Castle (0.6 miles north-east). Open spaces near Letham include Lindores Loch and Cairnie Hill.
What else we do in Letham
Repairing versus replacing in Letham
Swapping a damaged bath for a new one normally involves a plumber, removing the old bath, making good the tiles and panel and disposing of the old one. A repair deals only with the damage in a single visit. Our bath repair starts from £95. What it costs depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.
What you get with us
- Most jobs done in one visit
- Everything repaired in place
- Honest advice, even when it means no job
- CHAS and Constructionline accredited
See our full price list and guide to resurfacing and replacement costs.
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
How the visit works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a morning or an afternoon. If we find something your photos didn’t show, we will explain it before carrying on.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the next day.
Preparing for the visit
- Have a window or extractor fan available
- Mention if the room is upstairs or in a flat
- Let the surface dry out before the visit
Get a quote
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
About our accreditations · Every repair comes with a one-year guarantee.
