Oxfordshire · England

Bath chip & crack repair in Lewknor, Oxfordshire

We travel to Lewknor for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.

  • Repairs from £95
  • Impact holes in acrylic
  • Deep scratches in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Lewknor

Bath repair at your home in Lewknor

Whatever the damage, the aim is the same: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. Our repair technicians work on cast iron enamel, pressed steel enamel and whirlpool & spa baths, and the jobs we see most are chips along the edge of the bath and a cracked acrylic bath.

The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.

Location
Lewknor (OX49)
County
Oxfordshire
Warranty
One year on every repair
Quotes
From £95. Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

What affects the price in Lewknor

Repairs from £95. Prices are worked out job by job. The main factors are:

  • What the surface is made of
  • Any earlier repairs that need removing first
  • What kind of damage it is
  • Doing more than one item at once

We charge the same wherever you are, so there is no premium for Lewknor. The job itself decides the price: how much damage, what it’s made of and how many items.

Quotes from your photos

A couple of clear pictures is all it takes. It helps if you send:

  • Details of any past repairs
  • A picture taken from further back
  • Natural light rather than flash
  • A clear, close picture of the problem area

The quickest way to a price is to send a couple of photos through our quote form or ring us. We’ll say immediately if a repair is the right fix.

Common problems we fix in Lewknor

Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.

Most people contact us after spotting something like this:

  • Chips on the rim or sides
  • Cracks in an acrylic bath
  • A hole punched through by something heavy
  • Deep scratches in acrylic

What your quote should include

  • Aftercare advice
  • How soon you can use it again
  • If travel is included in the price
  • Whether a trained technician does the job

Our hiring checklist

When a repair is not the answer

A repair is not right for every job, for example:

  • A bath that moves underfoot, until its support is fixed
  • Water coming from the waste or taps rather than the bath
  • Cracks in acrylic we cannot reach from underneath

Send us pictures and we’ll tell you honestly before you book.

Materials we work on in Lewknor

  • Whirlpool & spa baths
  • Acrylic
  • Pressed steel enamel
  • Cast iron enamel
  • Roll-top & freestanding

Lewknor: your questions answered

Will it make a mess?

Dust sheets and masking go down before we start, and we clean up when we have finished.

How do I get a price for bath repair in Lewknor?

Prices start from £95. We give a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.

Is a bath repair permanent?

It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.

Will I be able to see the repair?

The goal is a repair that blends in. The rest of the bath’s condition makes a difference.

Can you price it without visiting?

Usually, yes. Clear pictures let us give you a fixed quote without visiting.

How long before I can use the bath?

Most baths can be used the day after. We confirm the time before we leave.

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.

Are there extra charges for Lewknor?

No. Our quotes include travel, and we charge the same wherever you are.

How the visit works

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes a few hours, depending on the damage. We clean up when we’re done and let you know when you can use it again.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

How to prepare

  • Keep a parking space free if you can
  • Tell us if there are stairs or a lift
  • Let the surface dry out before the visit

Get a quote

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.

Send pictures for a quote

Related advice

DIY repairs versus a professional job

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.

For landlords and businesses

We carry out planned and one-off repairs for housing associations and facilities teams in Oxfordshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

Repair or replace in Lewknor?

When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. Where the entire surface is tired, we may suggest re-enamelling instead. Prices start from £95. Set against the cost of replacement, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.

Why Lewknor clients choose us

  • One-year guarantee on every repair
  • Dust sheets down, tidy finish
  • No extra charge for your area
  • No need to remove anything

Read our prices page and guide to resurfacing and replacement costs.

Where we work around Lewknor

Lewknor is about 5 miles south of Thame, in Oxfordshire. From the centre of Lewknor to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Our technicians cover 443 places in Oxfordshire, from the larger towns to small villages. We work right across the region, from Lewknor to London (39 miles away).

We cover every part of the OX49 postcode area and the streets around it. Whether you live on High Street, Weston Road and Lewknor Close or a nearby road, a technician can come to you. Neighbouring places we cover include South Weston (1 mile north-west), Aston Rowant (1 mile north-east), Postcombe (1 mile north), Shirburn (1 mile south-west) and Kingston Blount (2 miles north-east). Within a short drive, we also cover Oxford (12 miles north-west), Didcot (13 miles west), Abingdon-on-Thames (13 miles west), Thame (5 miles north), Henley-on-Thames (10 miles south) and Benson (7 miles south-west).

Near you in Lewknor

In Lewknor, that means homes near Icknield Community College, Lewknor Church of England Primary School and Ye Olde Leathern Bottle Public House. Further afield, we also cover the area around Thame Community Hospital (5 miles north). Open spaces near Lewknor include Aston Rowant NNR and Bald Hill.

Map of Lewknor © OpenStreetMap contributors

Materials and what they mean for the repair

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.

Cast iron

Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.