Bridgend · Wales
Bath Repair in Litchard
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Litchard. Free, fixed quotes from your photos.
- Repairs from £95
- A chipped rim or side
- Impact holes in acrylic
Bath repair in Litchard, done in place
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. There’s no plumbing to disconnect, the tiles are not touched, and the repaired area is colour-matched so it blends in. Our technicians work on cast iron enamel, acrylic and roll-top & freestanding, and the jobs we see most are a failed DIY repair that’s discoloured or lifting and chips caused by builders.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Location
- Litchard (CF31, CF35, CF32)
- Area hub
- Bridgend
- Cover
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath repair
Prices start from £95. There is no charge for travel to Litchard. The price depends on:
- How hard the colour is to match
- Whether old repairs or coatings need taking off
- How easy the damage is to reach
- How many items we do on one visit
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Getting a price from photos
Two or three clear photos are typically enough. It helps if you send:
- The material, if you know it
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
- The postcode, so we can plan the visit
The quickest way to a price is to send two or three photos using our quote form or call us. We will say right away whether it can be repaired.
Do you need bath repair in Litchard?
A cracked acrylic bath typically wasn’t supported properly. Legs that are not adjusted, a missing cradle or a soft floor let the bath move.
Get in touch if you’ve noticed any of these:
- Scratches you can feel with a fingernail
- Chips on the rim or sides
- A kit repair that didn’t last
- Rusty patches near the plughole
What to look for in a quote
- How long it needs to cure
- Aftercare advice
- How the colour is matched
- Who turns up on the day
Can I fix it myself?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
What we can’t put right
A few problems are outside what a surface repair can do:
- Flexing caused by a failed cradle or loose feet
- Water coming from the waste or taps rather than the bath
- Acrylic cracks with no access behind them
If in doubt, send photos and we’ll say what we think.
What we work on
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
Litchard questions
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Can you quote from photos?
Generally, yes. Clear photos let us give you a fixed price without visiting.
Is a cracked acrylic bath repairable?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Bridgend.
Is a holed acrylic bath repairable?
Usually. Photos of the hole and the underside help us check.
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we will take it from there.
The process
Here’s how a visit usually runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Allow a few hours, depending on the damage from start to finish. Before leaving, we tell you when it can be used and how to care for it.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Have a window or extractor fan available
- Clear toiletries, mats and anything else from around the area
Get a quote
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Advice
Landlord and trade work in Litchard
For anyone letting property in or around Litchard, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Where we work around Litchard
Litchard is about 1 mile north of Bridgend, in Bridgend. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our technicians cover 91 places across Bridgend.
Every address in CF31, CF35 and CF32 is covered. Local streets include Joslin Road, Garfield Avenue and St Francis Road, all of which we cover. With the A4061 close by, Litchard is easy for our repair technicians to reach. Neighbouring places we cover include Derwen (1 mile north-east), Pen-dre (1 mile south), Pen-y-cae (1 mile north-west), Wildmill (1 mile south-west) and St Bride's Minor (1 mile north-west). We also work in nearby towns such as Maesteg (7 miles north-west), Porthcawl (6 miles south-west), Pencoed (3 miles east), Pyle (5 miles west), Cornelly (6 miles west) and Gogledd Corneli (6 miles west).
Near you in Litchard
Around Litchard, we work in homes near Litchard Primary, Church Of St Mary and Bryntirion Comprehensive School and the streets around them. The nearest railway station is Wildmill station, roughly 0.5 miles south-west. A little further out are Princess of Wales Hospital (0.6 miles south) and Designer Outlet Bridgend (0.5 miles north). The countryside around Litchard includes Cornelly Quarry Lake 2 and Mount Ash.
What your bath is made of matters
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
More services for Litchard
How to look after the repair
To keep it looking its best for years:
- Have new chips seen to early
- Get a dripping tap fixed promptly
- Clean with warm water and a mild detergent
- Keep abrasive pads and gritty cleaners away from the bath
Keep metal objects like razors and cans off the surface, as they can leave rust marks. And fix dripping taps promptly.
Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
About our accreditations · Every repair comes with a one-year guarantee.
