Hampshire · England
Bath Repair for Little Ann homes
Fixed-price bath repair in Little Ann and the surrounding area, typically in one visit.
- Repairs from £95
- Damage beneath the taps
- Holes from dropped items
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a few hours. If anything looks different from your photos, we’ll talk to you before going ahead.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the next day.
Preparing for the visit
- Point us to the nearest place to park
- Tell us if there are stairs or a lift
- Clear toiletries, mats and anything else from around the area
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
Read more
Bath repair in Little Ann without replacing anything
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. If you are dealing with a hole punched through by something heavy and chips along the edge of the bath, we can help, whatever the material.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll sort it.
- Area
- Little Ann (SP11)
- County
- Hampshire
- Cover
- A year, on every repair
- Price
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Different materials, different repairs
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Nearby places to Little Ann
Other services in Little Ann
When a repair isn’t the answer
In fairness, there are a few things a repair will not fix:
- A steel bath rusted through
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Cracks in acrylic we cannot reach from underneath
Send us photos and we will tell you honestly.
Surfaces we repair
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
Signs you need bath repair in Little Ann
Rust generally starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
Signs it’s time to call us include:
- Impact holes in acrylic
- A cracked acrylic bath
- Snagging damage from a refit
- Rusty patches near the plughole
Questions to ask before booking
- Who turns up on the day
- What aftercare is recommended
- Is the price fixed, and does it include VAT?
- What the guarantee covers, and for how long
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
How to look after the repair
It’s all simple stuff, just a few sensible habits:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Put a towel in the bath if you are working above it
- Don’t scrub with anything abrasive
- Keep metal cans and razors off the surface
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
Little Ann: your questions answered
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is a bath repair durable?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Is a cracked acrylic bath repairable?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Can you match an avocado or pink bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Is a holed acrylic bath repairable?
Usually. Photos of the hole and the underside help us check.
How we price bath repair
Prices start from £95. You won’t pay by the hour. The price is based on:
- Unusual colours or finishes
- How easy the damage is to reach
- The material and finish
- Whether old repairs or coatings need taking off
We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Send pictures for a quote
The better the photos, the more accurate the price. Here’s what helps:
- One picture of the whole bath
- Any details about the material
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job without visiting.
For landlords and businesses
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Landlords, letting agents and housing providers in Little Ann use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
About Little Ann
Little Ann is about 2 miles south-west of Andover, in Hampshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We cover all 683 towns and villages across Hampshire, from the larger towns to small villages. We work right across the region, from Little Ann to London (65 miles away).
We work across the SP11 postcode area. From Salisbury Road, The Old Coach Road and Old Salisbury Road or anywhere nearby, a technician can come to you. Neighbouring places we cover include Abbotts Ann (1 mile west), Anna Valley (1 mile north-east), Red Rice (1 mile south), Monxton (2 miles north-west) and Amport (2 miles west). Within a short drive, we also cover Winchester (13 miles south-east), Chandler's Ford (15 miles south), Romsey (14 miles south), Hyde (12 miles south-east), Tidworth (7 miles north-west) and Weeke (11 miles south-east).
Landmarks near Little Ann
Locally, our jobs take us to homes close to The Eagle pub, John Hanson Community School and Abbotts Ann Church of England Primary School and the streets around them. Also close by are Redrice School (1 mile south) and Church of St Mary the Virgin (under half a mile west). For rail, the closest station is Andover station, about 2 miles north-east of the centre. Well-known places in the area include Andover War Memorial Hospital (2.2 miles north-east) and Andover Museum (2.4 miles north-east). Open spaces near Little Ann include Anton Lakes and Mill Lake.
About our accreditations · Every repair comes with a one-year guarantee.
