Hampshire · England
Bath Repair for Winchester homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Winchester. Free, fixed quotes from your photos.
- Repairs from £95
- Chips caused by builders
- A kit repair that didn’t last
Aftercare tips
Much of the damage we repair could have been avoided. These habits help:
- Get any new chip repaired before it rusts
- Rinse the bath after use, especially in hard water areas
- If an acrylic bath flexes, have its feet adjusted
- Clean with warm water and a mild detergent
Care for the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Remove it before the repair.
Bath repair in Winchester without replacing anything
A repair fixes just the damaged area and blends it into the rest of the bath, which costs far less than replacing a fitted bath and the tiles around it. Most baths can be used again the day after. Common call-outs are for damage beneath the taps and cracks in an acrylic bath, across roll-top & freestanding, pressed steel enamel and cast iron enamel.
A one-year guarantee comes as standard.
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Places near Winchester
What else we do in Winchester
Why repair rather than replace?
People frequently assume a cracked or chipped bath has to come out. In most cases it doesn’t: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Repairs from £95, with every job priced individually. Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why choose Surface Doctor in Winchester
- Most jobs done in one visit
- Nothing taken out or refitted
- Fixed prices from your photos
- Colour-matched on site
Read our full price list and guide to resurfacing and replacement costs.
What a repair cannot fix
Honesty matters more than a booking, so here’s what a repair cannot fix:
- Wear across the entire surface, which needs re-enamelling
- Cracks in acrylic we can’t reach from underneath
- Metal that has corroded all the way through
Not sure? Send photos and we will give you a straight answer before you book.
What we work on
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
Questions from Winchester
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
How invisible is a bath repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Where we work around Winchester
Winchester is in Hampshire. We visit homes and businesses in Winchester and nearby villages, so nothing has to leave your home. We cover all 683 towns and villages in Hampshire, from the larger towns to small villages. Our nearest city page is London, about 61 miles away.
All of SO22, SO23, SO32 and SO21 is covered. Jobs here include addresses on The Square, Market Street and Market Lane. Winchester is on the A31 and A32, which makes it straightforward to reach. If you are just outside Winchester, we cover Bar End (1 mile south-east), Highcliffe (1 mile east), Hyde (1 mile north), St Cross (1 mile south) and Stanmore (1 mile south-west). Further out, we also cover Eastleigh (6 miles south), Fareham (15 miles south), Andover (13 miles north-west), Totton (13 miles south-west), Chandler's Ford (6 miles south-west) and Hedge End (10 miles south). Winchester is one of the larger places we cover in Hampshire.
Landmarks near Winchester
Typical jobs here are in homes near St Bede Church of England Primary School, Leigh House Hospital and Peter Symonds College, among other places. Other local landmarks include St. Cross Park (1 mile south), St Swithun-upon-Kingsgate Church (under half a mile east) and The Green Man pub (under half a mile north-west). The closest station to Winchester is Winchester station, about 0.6 miles north. Well-known places in the area include Winchester City Museum (within half a mile north-east) and St John's Rooms And Chapel (under half a mile east). For a walk, there’s Winnall Moors and Twyford Down.
What affects the price in Winchester
Repairs from £95. We do not charge extra for travel to Winchester. The price depends on:
- How easy the damage is to reach
- How much damage there is
- What kind of damage it is
- Any earlier repairs that need removing first
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Quotes from your photos
You can typically get a fixed quote without us visiting. To make it quick:
- A photo taken from further back
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
- Any earlier repairs or coatings
Most customers in Winchester get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
What we do, step by step
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes a few hours, depending on the damage, and we finish with a tidy-up and a look at the finished work together.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, generally the next day.
Preparing for the visit
- Open a window if you can
- Plan for the room to be out of bounds to pets and children
- Ensure the area is dry
Ask for a price
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Related advice
Landlord and trade work in Winchester
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
About our accreditations · Every repair comes with a one-year guarantee.
