Lancashire · England

Bath chip & crack repair in Little Eccleston, Lancashire

Bath repair in and around Little Eccleston: photo quotes, tidy work and a year’s guarantee.

  • Repairs from £95
  • Chips on the rim or sides
  • Scuffs and scratches in the surface
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Little Eccleston?

How we price bath repair

Repairs from £95. We do not charge extra for travel to Little Eccleston. The price depends on:

  • How easy the damage is to reach
  • How many items we do on one visit
  • The colour and finish to match
  • Any earlier repairs that need removing first

Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

How to get a fixed price

Good photos mean an accurate price. Here’s what helps:

  • A coin beside the damage so we can judge size
  • A close-up of the damage, in focus
  • A wider photo showing the whole bath
  • Your postcode, so we can check dates

There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

How we handle bath repair in Little Eccleston

You don’t need a new bath because of a chip. Our repair technicians fill, shape and refinish the damage, mixing the colour on the day so the repair is hard to spot. We’re often asked to fix chips under the taps and chips on the rim or sides, across pressed steel enamel, roll-top & freestanding and cast iron enamel.

We guarantee the work for a year. If something is not right in that time, we come back and put it right.

Area
Little Eccleston (PR3)
Area hub
Lancashire
Guarantee
A year, on every repair
Quotes
From £95. Free and fixed, from your photos
Phone
0345 017 0787
Page updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

Common problems we fix in Little Eccleston

Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.

It’s worth getting a quote if you see:

  • Rust by the waste and overflow
  • Chips on the rim or sides
  • Impact holes in acrylic
  • Chips caused by builders

What to look for in a quote

  • What protection goes down before work starts
  • What the guarantee covers, and for how long
  • Whether cleaning and preparation are in the price
  • How the colour is matched

How to compare quotes

Landlord and trade work in Little Eccleston

We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

Why repair rather than replace?

Many people think a damaged bath means a new one. In most cases it doesn’t: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Prices start from £95. We charge the same wherever you are, so there is no premium for Little Eccleston. The job itself decides the price: how much damage, what it’s made of and how many items.

Why choose Surface Doctor in Little Eccleston

  • Accredited with CHAS, Constructionline and SafeContractor
  • Free fixed quotes from pictures
  • We leave the room as we found it
  • Colours mixed by hand to suit your surface

See our prices page and bath cost comparison.

Our work in Little Eccleston

Little Eccleston is about 4 miles east of Poulton-le-Fylde, in Lancashire. Whether you’re in the middle of Little Eccleston or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in 482 places in Lancashire, from the larger towns to small villages. Our jobs stretch from Little Eccleston to Liverpool (31 miles away).

Here we cover the PR3 postcode area. That includes homes on Gillow Park, Cartford Lane and Cartford Close and the roads around them. Neighbouring places we cover include Great Eccleston (1 mile south-east), Ratten Row (1 mile north-east), Copp (1 mile south), Elswick (1 mile south) and Moss Edge (2 miles north). Within a short drive, we also cover Preston (10 miles south-east), Lancaster (14 miles north), Lytham St Anne's (9 miles south-west), Bamber Bridge (13 miles south-east), Morecambe (14 miles north) and Leyland (14 miles south-east).

Near you in Little Eccleston

Our clients here include homes close to St Mary's Catholic Primary School, The Cartford Inn and Church of St Anne. The nearest railway station is Poulton-Le-Fylde station, about 4.5 miles west. A little further out are Bispham Hospital (5.7 miles west). Green spaces nearby include Winmarleigh and Cockerham Moss.

Map of Little Eccleston © OpenStreetMap contributors

How the visit works

Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we’re doing. It typically takes a morning or an afternoon, and you are welcome to carry on with your day while we work.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the following day.

Preparing for the visit

  • Open a window if you can
  • Plan for the room to be out of bounds to pets and children
  • Let the surface dry out before the visit

Ask for a price

We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.

Send photos for a quote

Advice

FAQs for Little Eccleston

Will the price change on the day?

We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.

Can tenants book a repair?

We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.

Are there extra charges for Little Eccleston?

Travel is included in the price, and we charge the same wherever you are.

Is it worth repairing rather than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.

Can I add another job to the visit?

Yes. Doing several items on one visit normally costs less than separate visits. Send photos of everything you’d like done.

Can I get a quote without a visit?

Usually, yes. Clear photos let us give you a fixed price without visiting.

Can you fix rust around the plughole?

Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.

Do you come to Little Eccleston?

Yes. We work across the UK and travel to Little Eccleston and the rest of Lancashire. Send photos and we will quote, or call 0345 017 0787.

DIY repairs versus a professional job

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.

What we can’t put right

A few problems are outside what a surface repair can do:

  • A whole bath that’s dull or worn, where a full re-enamel is the better fix
  • A bath that moves underfoot, until its support is fixed
  • Cracks in acrylic we can’t reach from underneath

Not sure? Send pictures and we will give you a straight answer.

What we work on

  • Roll-top & freestanding
  • Pressed steel enamel
  • Acrylic
  • Cast iron enamel
  • Whirlpool & spa baths

Aftercare tips

Most damage we see is avoidable. These habits help:

  • Avoid scourers, wire wool and gritty cream cleaners
  • Don’t leave razors or cans standing in the bath
  • Check that an acrylic bath doesn’t move when you stand in it
  • Don’t leave a fresh chip for long

Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.

Tape over a fresh chip or crack until it’s repaired, to keep water out. Remove it before the repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.