West Lothian · Scotland
Bath chip & crack repair in Livingston Village, West Lothian
Chip and crack repairs to enamel, acrylic and cast iron baths in Livingston Village, carried out at your home and guaranteed for a year.
- Repairs from £95
- Holes from dropped items
- Chips caused by builders
Bath repair at your home in Livingston Village
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. Nothing is unplumbed, your tiles stay as they are, and the finish is matched to the rest of the bath. Typical jobs include chips caused by builders and rusty patches near the plughole, in cast iron enamel, roll-top & freestanding and whirlpool & spa baths.
All of our repairs are guaranteed for twelve months in Livingston Village and everywhere else. If something goes wrong with the work, we come back.
- Where
- Livingston Village (EH54)
- Region
- West Lothian
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Livingston Village questions
Can you repair something that is been repaired before?
Generally, yes. We remove the old repair before doing a new one, so mention it when you send pictures.
Can you price it without visiting?
Normally, yes. A close-up and a wider photo are enough to give a fixed price.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Is there any odour?
It depends on the job, but frequently a little. Open windows and an extractor fan help.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Do you come to Livingston Village?
Yes, we do. We send a technician to Livingston Village for every job, and the price is the same as everywhere else.
Can you match an avocado or pink bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Also in Livingston Village
What affects the price in Livingston Village
Prices start from £95. There’s no charge for travel to Livingston Village. The price comes down to:
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
- What the surface is made of
- Previous DIY repairs that have to come out
Compared with replacing, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Getting a price from pictures
A couple of clear pictures is all it takes. It helps if you send:
- A picture taken from further back
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
The quickest way to a price is to send two or three pictures using our quote form or call us. We will say right away if a repair is the right fix.
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Stick to mild cleaners and a soft cloth
- Rinse the bath after use, especially in hard water areas
- Put a towel in the bath if you’re working above it
- Keep abrasive pads and gritty cleaners away from the bath
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a morning or an afternoon. We clean up when we’re done and let you know when you can use it again.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
How to prepare
- Keep children and pets away from the room on the day
- Mention if the room is upstairs or in a flat
- Let the surface dry out before the visit
Ask for a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Advice
DIY kit or professional repair?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Landlords, agents and businesses in Livingston Village
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we will handle the rest.
Our work in Livingston Village
Livingston Village is about 1 mile south-west of Livingston, in West Lothian. From the centre of Livingston Village to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. Livingston Village is one of 58 towns and villages in West Lothian where we work. You can also see our page for Edinburgh, about 13 miles away.
Our technicians cover all of the EH54 postcode area. Streets in the area include Kirk Lane, Allen Road and Meikle Road, all of which we cover. Livingston Village sits on or near the A705, which makes travel easy. If you are just outside Livingston Village, we cover Eliburn (1 mile north-west), Howden (1 mile east), Ladywell (1 mile north), Livingston (1 mile north-east) and Dedridge (1 mile south-east). Within a short drive, we also cover Bathgate (4 miles west), Linlithgow (7 miles north-west), Whitburn (6 miles west), East Calder (3 miles east), Broxburn (4 miles north-east) and Armadale (6 miles west).
What’s near Livingston Village
Locally, our jobs take us to homes close to The NewYearField pub, St. Margaret's Academy and Inveralmond Community High School and the streets around them. For rail, the closest station is Livingston North station, about 1.1 miles north. Nearby you’ll also find Almond Valley Heritage Centre (0.5 miles west) and Bathgate Castle (3.8 miles west). Green spaces nearby include Dechmont Law.
Materials and what they mean for the repair
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
What we can’t put right
We’d rather lose a job than do one that won’t last, so these are the limits:
- Wear across the entire surface, which needs re-enamelling
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Cracks in parts of an acrylic bath we can’t get to from below
Send us photos and we will tell you honestly.
Materials we work on in Livingston Village
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
Repair or replace in Livingston Village?
Many people think a damaged bath means a new one. In most cases it does not: a proper repair gives it years more use, without the cost and upheaval of replacing it. Prices start from £95. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why choose Surface Doctor in Livingston Village
- Free fixed quotes from pictures
- No need to remove anything
- Rooms protected and left tidy
- Work done at your home or business
Read our full price list or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
