Monmouthshire · Wales
Bath chip & crack repair in Llanfoist, Monmouthshire
Bath repair across Llanfoist and nearby, done in a single visit in most cases.
- Repairs from £95
- Hairline or through cracks in acrylic
- Chips on the rim or sides
Bath repair in Llanfoist, done in place
You don’t need a new bath because of a chip. Our repair technicians fill, shape and refinish the damage, with the colour mixed on site. Typical jobs include a chip where the taps sit and chips along the edge of the bath, across roll-top & freestanding, acrylic and cast iron enamel.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll come back.
- Where
- Llanfoist (NP7)
- Area hub
- Monmouthshire
- Guarantee
- A year, on every repair
- Price
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
FAQs for Llanfoist
Do you cover the entire of Monmouthshire?
All of Monmouthshire, and the rest of the UK. Travel is included in the price.
Are there extra charges for Llanfoist?
No. Our quotes include travel, and we charge the same wherever you are.
What happens after I send photos?
We come back with a fixed price, normally with dates to choose from. There is no obligation to book.
Is a holed acrylic bath repairable?
Typically. Photos of the hole and the underside help us check.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
How much does bath repair cost in Llanfoist?
Repairs from £95. Every job gets a fixed quote based on pictures of the damage. Send a close-up and a picture of the whole item and your postcode.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before and we’ll plan for it.
Different materials, different repairs
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Do you need bath repair in Llanfoist?
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, and the damage is not always spotted until later. Snagging repairs like these are a regular job for us.
Keep an eye out for these signs:
- Rusty patches near the plughole
- Chips under the taps
- Chips on the rim or sides
- Holes from dropped items
Questions to ask before you book
- What happens if the damage is worse than the photos show
- Whether the price is fixed and includes VAT
- Whether a trained technician does the job
- How to look after the finish
The process
We turn up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes a few hours, and we leave the room as we found it.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Point us to the nearest place to park
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Read more
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Keeping it looking good
Looking after the surface is easy, and it makes a real difference:
- Give the bath a quick rinse after use
- Put a towel in the bath if you’re working above it
- Use a soft cloth and washing-up liquid for everyday cleaning
- Get any new chip repaired before it rusts
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath without abrasive products.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
Repair or replace in Llanfoist?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and nothing else in the room changes. Prices start from £95. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access.
Why book with us
- A fixed quote before booking
- We come to you, anywhere in the UK
- Accredited with CHAS, Constructionline and SafeContractor
- Every repair guaranteed for a year
See our pricing or resurfacing vs replacement cost guide.
How we price bath repair
Repairs from £95. You will know the full cost before booking. We take into account:
- Whether we combine several jobs
- Any earlier repairs that need removing first
- How many areas need work
- How hard the colour is to match
Set against the cost of replacement, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Send photos for a quote
You can take the photos on your phone. Just ensure we can see:
- The material, if you know it
- Any earlier repairs or coatings
- A picture taken from further back
- Where you are, by postcode
The quickest way to a price is to send a couple of photos through our quote form or call us. We’ll say immediately whether it can be repaired.
Landlord and trade work in Llanfoist
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Where we work around Llanfoist
Llanfoist (Welsh: Llanffwyst) is about 1 mile south-west of Abergavenny, in Monmouthshire. Clients in Llanfoist get the same service as everywhere else we cover: a fixed quote from your pictures, then a visit to do the work. We work in 115 places in Monmouthshire. Our nearest city page is Birmingham, about 66 miles away.
Every address in NP7 is within our area, from the main roads to the quietest streets. Whether you live on Clos y Santes Faith, Clos Thomas Hill and Trem y Fowlen or anywhere nearby, a technician can come to you. Other places close to Llanfoist include Grofield (1 mile north), Llanwenarth (1 mile west), Cantref (1 mile north), Pen-y-pound (1 mile north-east) and Abergavenny (1 mile north-east). We also work in nearby towns such as Monmouth (13 miles east), Overmonnow (13 miles east), Usk (9 miles south-east), Gilwern (3 miles west), May Hill (14 miles east) and Pen-y-bont (3 miles west).
Around Llanfoist
In Llanfoist, that means homes near Linda Vista Gardens, King Henry VIII School Abergavenny and Parish Church of St Faith. Also close by are King Henry VIII School Abergavenny (1.3 miles north-east), Llanfoist Fawr Primary School (under half a mile south) and Llanfoist Inn (under half a mile west). The nearest railway station is Abergavenny station, about 0.9 miles east. A little further out are Blaenavon Ironworks (3.6 miles south-west) and Abergavenny Castle (0.7 miles north-east). For a walk, there is Ysgyryd Fach.
- Other local spots include Castle (0.8 miles north-east)
Nearby places to Llanfoist
Also in Llanfoist
About our accreditations · Every repair comes with a one-year guarantee.
