East Ayrshire · Scotland
Bath chip & crack repair in Logan, East Ayrshire
Chip and crack repairs to enamel, acrylic and cast iron baths in Logan, carried out at your home and guaranteed for a year.
- Repairs from £95
- A hole punched through by something heavy
- Chips caused by builders
Bath repair in Logan without replacing anything
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in one visit. If you are dealing with a chip where the taps sit and damage done while the bathroom was being fitted, we can normally put it right, on cast iron enamel, whirlpool & spa baths and roll-top & freestanding alike.
You’re covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Where
- Logan (KA18)
- County
- East Ayrshire
- Warranty
- A year, on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
Simple care helps the repair last. We recommend:
- A dripping tap stains enamel, so fix it early
- Clean with warm water and a mild detergent
- Get any new chip repaired before it rusts
- Rinse the bath after use, especially in hard water areas
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath without abrasive products.
Don’t leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
When to call us in Logan
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
Look out for any of the following:
- Damage beneath the taps
- Chips along the edge of the bath
- Chips caused by builders
- Deep scratches in acrylic
Before you book anyone
- Aftercare advice
- How changes to the job are handled
- How the colour is matched
- How the room is protected while they work
What bath repair costs
Repairs from £95. There are no hourly rates or hidden extras. The price is based on:
- Where the damage is and how we get to it
- The type of damage
- The material and finish
- Any earlier repairs that need removing first
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Getting a price from pictures
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Your postcode, so we can check dates
- Details of any past repairs
- A close-up of the damage, in focus
- A wider photo showing the whole bath
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
The process
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes two to three hours for most chips, depending on what we find, and we finish by cleaning up and talking you through the result.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Let us know which floor the room is on
- Mention any parking restrictions or tricky access
- Point us to the nearest place to park
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
Advice
When we’d advise against a repair
We will not take on work that will not last, so these are the limits:
- Metal that has corroded all the way through
- Water coming from the waste or taps rather than the bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Not sure? Send photos and we’ll give you a straight answer before you book.
What we work on
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
Landlords, agents and businesses in Logan
If you manage property in Logan, we’ll quote for several properties at once. Send pictures for each one and we’ll come back with a combined price.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Nearby places to Logan
More services for Logan
Logan and nearby
Logan is about 15 miles south-east of Kilmarnock, in East Ayrshire. Book a date that suits you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. Logan is one of 53 towns and villages in East Ayrshire we cover. We work right across the region, from Logan to Glasgow (27 miles away).
We cover every part of KA18 and the streets around it. Streets in the area include Logan Avenue, Glen Avenue and Logangate Terrace, and we cover them all. Other places close to Logan include Lugar (1 mile north), Craigens (1 mile south), Cumnock (1 mile west), Netherthird (1 mile south-west) and Cronberry (2 miles north-east). We also work in nearby towns such as Kilmarnock (15 miles north-west), Annanhill (15 miles north-west), Galston (11 miles north-west), Mauchline (7 miles north-west), New Farm Loch (14 miles north-west) and Bonnyton (15 miles north-west).
Local landmarks in Logan
Typical jobs here are in homes near Robert Burns Academy and Lugar Parish Church, among other places. The closest station to Logan is Auchinleck station, roughly 2.6 miles west. Well-known places in the area include Borland Castle (1.9 miles south) and East Ayrshire Community Hospital (1.7 miles west). Open spaces near Logan include Airds Moss RSPB Reserve and Black Loch.
Common questions in Logan
What areas do you cover?
The entire UK, including all of East Ayrshire. Just include your postcode and we’ll confirm dates.
Can you repair something that’s been repaired before?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and we will quote them together.
Is the work guaranteed?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
How soon can you come?
That depends on our diary for your area. We will offer you dates when we send your quote.
Is a cracked acrylic bath repairable?
Frequently, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a photo.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
How do I book?
Send photos through the quote form or call 0345 017 0787, and we’ll do the rest.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.
About our accreditations · Every repair comes with a one-year guarantee.
