Buckinghamshire · England
Bath Repair for Long Crendon homes
Problem with your bath in Long Crendon? We repair it in place, match it on site and guarantee the work for a year.
- Repairs from £95
- Rusty patches near the plughole
- Deep scratches in acrylic
About our bath repair in Long Crendon
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Typical jobs include rust by the waste and overflow and a chip where the taps sit, across whirlpool & spa baths, pressed steel enamel and roll-top & freestanding.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Long Crendon (HP18)
- County
- Buckinghamshire
- Cover
- 12 months on all our work
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace in Long Crendon?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. A repair keeps it in place. Our bath repair starts from £95. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
What you get with us
- We will tell you if it’s not worth repairing
- A fixed quote before you book
- No need to remove anything
- Repair technicians who travel to you, UK-wide
Take a look at our pricing and bath cost comparison.
Honest limits
It helps to know what we cannot do too:
- Wear across the entire surface, which needs re-enamelling
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Not sure? Send pictures and we will give you a straight answer before booking.
What we work on
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
What affects the price in Long Crendon
Prices start from £95. There are no hourly rates or hidden extras. The price is based on:
- How many areas need work
- Unusual colours or finishes
- What the surface is made of
- How many items we do on one visit
Set against the cost of replacement, repairing normally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Send photos for a quote
You can generally get a fixed price without us visiting. To help us price it:
- One sharp close-up of the damage
- Your postcode, so we can check dates
- What it’s made of, if you know
- A coin or ruler next to the damage for scale
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and no obligation.
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
How the visit works
Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and the work begins. Allow a morning or an afternoon, and we will tell you if anything changes.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Let us know which floor the room is on
- Tell us about parking, stairs or access
- Ensure the area is dry
Ask for a price
For a price in Long Crendon, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Read more
Different materials, different repairs
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so repair chips early.
What else we do in Long Crendon
Common problems we fix in Long Crendon
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Fittings cause damage too: water collects there, so chips nearby rust quickly.
People usually call us after spotting something like this:
- Hairline or through cracks in acrylic
- Rusty patches near the plughole
- Holes from dropped items
- A chip where the taps sit
Comparing quotes
- Whether there are any call-out or travel charges
- What aftercare is recommended
- Who will actually do the work
- How the room is protected while they work
Questions from Long Crendon
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
How do I get a price for bath repair in Long Crendon?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.
Can you price it without visiting?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
How long does the repair take to cure?
Normally by the following day, though it depends on what we’ve done.
Will there be a smell?
It depends on the job, but often a little. Open windows and an extractor fan help, and it soon fades.
Are there extra charges for Long Crendon?
There is no separate call-out charge. Your fixed price includes everything.
Where we work around Long Crendon
Long Crendon is about 2 miles north-west of Thame, in Buckinghamshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Long Crendon is one of 263 towns and villages in Buckinghamshire where we work. You can also see our page for London, about 43 miles away.
Our technicians cover all of HP18. We regularly work on streets such as High Street, The Square and Giffard Way. Other places close to Long Crendon include Chearsley (2 miles north-east), Thame (2 miles south-east), Moreton (3 miles south), Haddenham (3 miles east) and Cuddington (3 miles north-east). Within a short drive, we also cover Aylesbury (8 miles east), High Wycombe (15 miles south-east), Buckingham (15 miles north), Elmhurst (9 miles north-east), Southcourt (8 miles east) and Princes Risborough (8 miles south-east).
Near you in Long Crendon
Locally, our jobs take us to homes close to The Eight Bells Public House, Long Crendon School and Church of St Mary, among other places. For rail, the closest station is Haddenham & Thame Parkway station, roughly 2.3 miles east. Further afield, we also cover the area around Dinton Castle (4.7 miles east) and Thame Community Hospital (2.4 miles south-east). Not far away are Snakemoor.
Landlords, agents and businesses in Long Crendon
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
About our accreditations · Every repair comes with a one-year guarantee.
