Shropshire · England
Bath Repair in Longslow
Local bath repair for Longslow: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Rusty patches near the plughole
- A cracked acrylic bath
Your questions about bath repair in Longslow
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will I be able to see the repair?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we will tell you what to expect.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Is the work guaranteed?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Do you cover Longslow?
Yes. We work across the UK and come to Longslow. Send pictures and we will quote, or call 0345 017 0787.
Is there any odour?
There may be a mild smell during the work that clears as it cures.
It’s been repaired before. Can you still fix it?
Yes, we frequently do. It can add a little time, which we include in the quote.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including older coloured suites.
Bath repair in Longslow without replacing anything
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. We work on roll-top & freestanding, whirlpool & spa baths and cast iron enamel, and the jobs we see most are rust spots around the plughole and scuffs and scratches in the surface.
All our work is covered by our one-year guarantee.
- Where
- Longslow (TF9)
- Region
- Shropshire
- Guarantee
- One year on every repair
- Quote
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Longslow
Also in Longslow
Repair or replace in Longslow?
Swapping a damaged bath for a new one normally involves a plumber, removing the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it deals only with the damage in one visit. Prices start from £95. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- No extra charge for your area
- CHAS and Constructionline accredited
- Technicians who travel to you, UK-wide
- Nothing taken out or refitted
Read our pricing and guide to resurfacing and replacement costs.
What we do, step by step
Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes a few hours, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, normally the day after.
How to prepare
- Let us know if it has been repaired before
- Point us to the nearest place to park
- Avoid using the area for a few hours before we arrive
How to get a price
You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Read more
About Longslow
Longslow is about 1 mile north-west of Market Drayton, in Shropshire. Wherever you are in the TF9 postcode area, a technician comes to you. Our repair technicians cover all 433 towns and villages in Shropshire, from the larger towns to small villages. We work right across the region, from Longslow to Liverpool (38 miles away).
Postcode districts we cover here: TF9. Other places close to Longslow include Longford (1 mile south-west), Bletchley (2 miles south-west), Newstreet Lane (2 miles north-west), Moretonwood (2 miles west) and Adderley (3 miles north). Within a short drive, we also cover Whitchurch (8 miles north-west), Wem (10 miles south-west), Sundorne (15 miles south-west), Harlescott (15 miles south-west), Loggerheads (5 miles east) and Bomere Heath (15 miles south-west).
Landmarks near Longslow
Typical jobs here are in homes near Market Drayton Junior School and Grove School and the streets around them. Further afield, we also cover the area around Market Drayton Museum And Resource Centre (1.4 miles south-east).
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Keep abrasive pads and gritty cleaners away from the bath
- Do not leave a fresh chip for long
- Use a soft cloth and washing-up liquid for everyday cleaning
- Store metal items away from the bath
Do not leave razors, cans or hair grips in the bath, because they can mark the enamel. A dripping tap should be fixed early, too.
Small chips are quick to repair. Left alone, they stain and can rust, so it’s worth getting them done early.
Landlord and trade work in Longslow
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We regularly work with letting and managing agents. Send the address, photos and access details.
What bath repair costs
Repairs from £95. There’s no area surcharge for Longslow. What changes the price is:
- The colour and finish to match
- The size and number of damaged areas
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Send photos for a quote
Two or three clear photos are normally enough. It helps if you send:
- Natural light rather than flash
- Details of any past repairs
- Where you are, by postcode
- One sharp close-up of the damage
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
What we cannot put right
Some problems need a builder, plumber or fitter rather than us:
- A bath worn all over, where resurfacing makes more sense
- Flexing caused by a failed cradle or loose feet
- Cracks in parts of an acrylic bath we cannot get to from below
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
