Shropshire · England
Bath Repair in Calverhall
Damaged bath in Calverhall? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- Chips under the taps
- Impact holes in acrylic
Bath repair at your home in Calverhall
A typical bath repair is a few hours’ work, and you can usually bathe again the following day. There is no need to book a plumber or tiler, because nothing is disconnected. Typical jobs include cracks in an acrylic bath and a chipped rim or side, on cast iron enamel, roll-top & freestanding and pressed steel enamel.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Area
- Calverhall (SY13)
- Region
- Shropshire
- Cover
- One year on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Calverhall questions
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
How do I book?
Just pictures, your postcode and a contact number. On the day, access to the room.
What about rust by the waste?
Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first.
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Can I add another job to the visit?
Of course, and it generally saves money. Send pictures of everything together and we will quote them together.
Can I get a quote without a visit?
Generally, yes. A close-up and a wider photo are enough to give a fixed quote.
Something went through my bath. Can it be fixed?
Often, if there is access underneath. The hole is backed, filled and refinished to match.
What bath repair costs
Prices start from £95. Quotes are free and the price is fixed. What we take into account:
- What kind of damage it is
- The size and number of damaged areas
- What the surface is made of
- Previous DIY repairs that have to come out
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Send pictures for a quote
When you take your photos, a few simple things make all the difference:
- Good light, ideally daylight, without flash glare
- A photo taken from further back
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
Email us pictures of the damage and one of the entire item, and tell us you are in Calverhall, and we will reply with a fixed price.
Towns and villages near Calverhall
Other services in Calverhall
Do you need bath repair in Calverhall?
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
Send us a picture if you notice any of these:
- Chips caused by builders
- Deep scratches in acrylic
- Rust by the waste and overflow
- A hole punched through by something heavy
Questions to ask before booking
- How changes to the job are handled
- Who will actually do the work
- How your room will be protected
- What preparation is included
Honest limits
Some jobs are not right for a repair, including:
- A bath worn all over, where resurfacing makes more sense
- A steel bath rusted through
- Acrylic cracks with no access behind them
If in doubt, send photos and we’ll say what we think.
What we work on
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
Looking after it afterwards
To keep it looking its best for years:
- Do not scrub with anything abrasive
- Have new chips seen to early
- Cover the bath during DIY or decorating
- Clean with warm water and a mild detergent
Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.
Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Remove it before the repair.
Different materials, different repairs
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Should you replace it?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. Where the whole surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- A fixed quote before you book
- One price list for the entire UK
- Work done at your home or business
- Every repair guaranteed for a year
Take a look at our prices page and resurfacing vs replacement cost guide.
How it works
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours, depending on the damage. We tidy up before we leave and tell you when it’s ready to use.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, normally the day after.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Ensure the room can be ventilated
- Tell us about parking, stairs or access
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Related advice
Can I fix it myself?
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
About Calverhall
Calverhall is about 5 miles north-west of Market Drayton, in Shropshire. Book a date that suits you, and we’ll give you an arrival time in advance, so there is no waiting around. Our technicians cover all 433 towns and villages in Shropshire. You can also see our page for Liverpool, about 36 miles away.
Jobs in SY13 are booked in the same way as anywhere else. That includes homes on Wilson Meadow, Calverhall Road and Bletchley Road. Close by, we cover Moretonwood (1 mile south-east), Newstreet Lane (2 miles east), Bletchley (3 miles south-east), Burleydam (3 miles north) and Longford (3 miles south-east). Further out, we also cover Market Drayton (5 miles south-east), Whitchurch (5 miles north-west), Wem (7 miles south-west), Heathgates (15 miles south-west), Ellesmere (13 miles west) and Sundorne (15 miles south).
Landmarks near Calverhall
Around Calverhall, we work in homes near Church of the Holy Trinity, among other places. For rail, the closest station is Whitchurch (Shropshire) station, roughly 4.1 miles north-west of the centre. A little further out are Whitchurch Community Hospital (4.5 miles north-west). Open spaces near Calverhall include Hawk Lake and Prees Heath Common.
About our accreditations · Every repair comes with a one-year guarantee.
