Sheffield · England
Bath Repair in Low Holdworth
Fixed-price bath repair in Low Holdworth and the surrounding area, done in a single visit in most cases.
- Repairs from £95
- Chips on the rim or sides
- Holes from dropped items
Repairs by material
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
About our bath repair in Low Holdworth
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There is no plumbing to disconnect, the tiles aren’t touched, and the repaired area is colour matched so it blends in. If you are dealing with rusty patches near the plughole and chips on the rim or sides, we can generally put it right, whatever the material.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Area
- Low Holdworth (S6)
- Area hub
- Sheffield
- Cover
- 12 months on all our work
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Looking after it afterwards
Most damage we see is avoidable. A few tips:
- Get any new chip repaired before it rusts
- Cover the bath during DIY or decorating
- Rinse it down after each bath
- Clean with warm water and a mild detergent
Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
About Low Holdworth
Low Holdworth is about 5 miles north-west of Sheffield, in Sheffield. Whether you are in the middle of Low Holdworth or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Low Holdworth is one of 118 towns and villages in Sheffield we cover. Our jobs stretch from Low Holdworth to Manchester (about 27 miles away).
We work across the S6 postcode area. You’ll find streets such as West Lane and Loxley Road. We also cover the places around Low Holdworth: Stacey Bank (1 mile south-west), Holdworth (1 mile north), Dungworth (1 mile south-west), Storrs (1 mile south) and Worrall (1 mile north-east). Within a short drive, we also cover Sheffield (5 miles south-east), Netherthorpe (4 miles south-east), Upperthorpe (4 miles south-east), West End (4 miles south-east), Walkley (3 miles south-east) and Broomhall (4 miles south-east).
Near you in Low Holdworth
We visit homes around Bradfield Dungworth Primary School, Monastery of The Holy Spirit and Bradfield School. The nearest railway station is Sheffield station, about 4.9 miles south-east. Further afield, we also cover the area around Sheffield Castle (4.7 miles south-east) and King Edward VII Orthopaedic Hospital (2.2 miles south). For a walk, there’s Fox Hagg.
Low Holdworth questions
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Something went through my bath. Can it be fixed?
Often, if there’s access underneath. The hole is backed, filled and refinished to match.
How do I get a price for bath repair in Low Holdworth?
Repairs from £95. Every job gets a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Is a bath repair permanent?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps.
How long before I can use the bath?
Normally by the following day, though it depends on what we have done.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Also in Low Holdworth
Work for landlords and builders
We regularly work with letting and managing agents. Just send photos, the address and how to get access.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Do you need bath repair in Low Holdworth?
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On enamelled baths, any chip down to the metal lets water in, and rust follows.
People typically call us after spotting one of these:
- Rust by the waste and overflow
- Chips caused by builders
- Deep scratches in acrylic
- A chipped rim or side
What your quote should include
- The length of the guarantee and what it covers
- A fixed quote, and whether VAT is included
- What protection goes down before work starts
- When it can be used again
DIY kit or professional repair?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
What happens on the day
You do not need to empty the room beforehand. We bring everything we need with us, lay protective sheets and get going once we have agreed what we are doing. Most jobs take a few hours, depending on the damage, and you can get on with other things while we’re there.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Have a window or extractor fan available
- Plan for the room to be out of bounds to pets and children
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Related advice
When we’d advise against a repair
Before you book, it’s worth knowing the limits too:
- A bath worn all over, where resurfacing makes more sense
- Metal that has corroded all the way through
- Acrylic cracks with no access behind them
Not sure? Send pictures and we’ll give you a straight answer before booking.
What we work on
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
How we price bath repair
Repairs from £95. Quotes are free and the price is fixed. What we take into account:
- What kind of damage it is
- How many areas need work
- Previous DIY repairs that have to come out
- Access to the area
We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
Before you send pictures, a few simple things make all the difference:
- The material, if you know it
- Your postcode, so we can check dates
- A wider photo showing the entire bath
- Daylight if possible, and no flash reflection
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
About our accreditations · Every repair comes with a one-year guarantee.
