Cumbria · England
Bath Repair for Low Row homes
Chip and crack repairs to enamel, acrylic and cast iron baths in Low Row, carried out at your home and guaranteed for a year.
- Repairs from £95
- A chip where the taps sit
- Holes from dropped items
Bath repair at your home in Low Row
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We work on cast iron enamel, roll-top & freestanding and pressed steel enamel, and common reasons people contact us are damage done while the bathroom was being fitted and deep scratches in acrylic.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Area
- Low Row (CA8)
- County
- Cumbria
- Guarantee
- One year on every repair
- Price
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace: which is better?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why us?
- CHAS, Constructionline and SafeContractor accredited
- Free fixed quotes from pictures
- Most jobs done in one visit
- Colour-matched on site
Take a look at our pricing and guide to resurfacing and replacement costs.
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
What we are called out for in Low Row
A cracked acrylic bath normally wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move until it cracks.
Customers typically contact us about:
- Rust by the waste and overflow
- An old repair that has yellowed or come loose
- Scratches you can feel with a fingernail
- Chips caused by builders
Comparing quotes
- When it can be used again
- Who will actually do the work
- The length of the guarantee and what it covers
- How the room is protected while they work
How it works
We turn up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take a few hours, depending on the damage, and the room is left clean and tidy.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
How to prepare
- Keep a parking space free if you can
- Let us know if it has been repaired before
- Avoid using the area for a few hours before we arrive
Getting a price
If you are in Low Row and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Related advice
Questions from Low Row
How quickly can you book me in?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
Can I add another job to the visit?
Yes. Doing several items on one visit typically costs less than separate visits. Send pictures of everything you’d like done.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Can you match an avocado or pink bath?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
What happens after I send pictures?
We look at the pictures and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Is there any odour?
There may be a mild smell during the work that clears as it cures.
What a repair cannot fix
A repair is not always the answer, and we’ll tell you before we start. We cannot fix:
- Cracks in parts of an acrylic bath we cannot get to from below
- Flexing caused by a failed cradle or loose feet
- A bath worn all over, where resurfacing makes more sense
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
Covering Low Row
Low Row is about 12 miles north-east of Carlisle, in Cumbria. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. Low Row is one of 438 towns and villages in Cumbria where we work. Our nearest city page is Newcastle upon Tyne, about 40 miles away.
Jobs in CA8 are booked in the same way as anywhere else. We regularly work on streets such as Stanegate Way and Carricks Court and the roads around them. We also travel to Hallbankgate (2 miles south), Brampton (4 miles south-west), Gilsland (4 miles north-east), Talkin (4 miles south-west) and Longbyre (5 miles north-east). Within a short drive, we also cover Carlisle (12 miles south-west), Currock (12 miles south-west), Raffles (14 miles west), Botcherby (12 miles south-west), Morton (14 miles south-west) and Belle Vue (14 miles west).
Near you in Low Row
Our clients here include homes close to Church of St Cuthbert and the streets around them. For rail, the closest station is Brampton (Cumbria) station, roughly 3 miles south-west. Further afield, we also cover the area around The Lyc Museum & Art Gallery (1.2 miles north-west) and Brampton War Memorial Hospital (3.4 miles south-west). Not far away are Geltsdale RSPB reserve and Tindale Tarn.
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Other services in Low Row
Landlord and trade work in Low Row
We regularly work with letting and managing agents. Send the address, pictures and access details.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
Aftercare tips
Most damage we see is avoidable. A few tips:
- Rinse the bath after use, especially in hard water areas
- Clean with warm water and a mild detergent
- Keep abrasive pads and gritty cleaners away from the bath
- Store metal items away from the bath
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.
About our accreditations · Every repair comes with a one-year guarantee.
