Carmarthenshire · Wales
Bath Repair in Lower Brynamman
Our repair technicians come to Lower Brynamman for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- A chipped rim or side
- Chips under the taps
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
About our bath repair in Lower Brynamman
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in one visit. We work on acrylic, whirlpool & spa baths and cast iron enamel, and people most frequently call us about a hole punched through by something heavy and damage done while the bathroom was being fitted.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.
- Location
- Lower Brynamman (SA18)
- County
- Carmarthenshire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Covering Lower Brynamman
Lower Brynamman is about 5 miles east of Ammanford, in Carmarthenshire. Clients in Lower Brynamman get the same service as everywhere else we cover: a fixed price from your photos, then a visit to do the work. Lower Brynamman is one of 195 places in Carmarthenshire we cover.
All of SA18 is covered, from the main roads to the quietest streets. From Glyn Road, Park Lane and Amman Road or a nearby road, a technician can come to you. If you are just outside Lower Brynamman, we cover Brynamman (1 mile north-east), Brynaman Uchaf (1 mile north-east), Tir Syr Walter (1 mile west), Gwaun-Cae-Gurwen (1 mile south) and Tairgwaith (1 mile south-east). Further out, we also cover Llanelli (15 miles south-west), Llanelli Rural (15 miles south-west), Bigyn (15 miles south-west), Wern (15 miles south-west), Ammanford (5 miles west) and Box (14 miles south-west).
Local landmarks in Lower Brynamman
Our customers here include homes close to Tairgwaith Primary School, Crown Inn and St Catherine's Church and the streets around them. Further afield, we also cover the area around Amman Valley Hospital (2 miles west) and West Glamorgan (2.1 miles north-east). The countryside around Lower Brynamman includes Gwaun-Cae-Gurwen Common and Llyn y Fignen-felen.
Common questions in Lower Brynamman
Which areas do you work in?
All of Carmarthenshire, and the rest of the UK. Travel is included in the price.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
When can you do it?
That depends on our diary for your area. We will offer you dates when we send your quote.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders.
How do I get a price for bath repair in Lower Brynamman?
Prices start from £95. We give a fixed quote from your photos. Send a close-up of the damage and a wider photo with your SA18 postcode.
What about rust by the waste?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
How the visit works
Here’s how a visit normally runs: we arrive at the agreed slot, protect everything around the work area, do the job and clear up. Plan for a few hours. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Plan for the room to be out of bounds to pets and children
- Have a window or extractor fan available
Getting a price
Upload a picture of the damage and a wider shot of the whole item, with your SA18 postcode, and we will come back with a fixed quote.
Read more
Looking after it afterwards
Aftercare is simple:
- If an acrylic bath flexes, have its feet adjusted
- Clean with warm water and a mild detergent
- Protect the bath with a towel when doing jobs nearby
- Do not leave a fresh chip for long
Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.
Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Signs you need bath repair in Lower Brynamman
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, a chip that reaches the metal will start to rust.
Signs it’s time to call us include:
- Chips along the edge of the bath
- Impact holes in acrylic
- Cracks in an acrylic bath
- Rust spots around the plughole
What your quote should include
- How the room is protected while they work
- Whether the price is fixed and includes VAT
- Aftercare advice
- How long it needs to cure
Honest limits
To be straight with you, some problems need a different fix:
- Acrylic cracks with no access behind them
- Water coming from the waste or taps rather than the bath
- Flexing caused by a failed cradle or loose feet
Not sure? Send pictures and we will give you a straight answer before you book.
What we work on
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
What your bath is made of matters
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
How we price bath repair
Prices start from £95. Prices are worked out job by job, from your photos. What matters most is:
- How many areas need work
- What kind of damage it is
- Where the damage is and how we get to it
- Whether we combine several jobs
The price reflects the work involved, not where you live. You’ll see the full price before booking, with nothing added on the day.
Getting a price from pictures
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- A coin beside the damage so we can judge size
- One picture of the whole bath
- One sharp close-up of the damage
- Where you are, by postcode
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Places near Lower Brynamman
Also in Lower Brynamman
About our accreditations · Every repair comes with a one-year guarantee.
