Leeds · England

Bath chip & crack repair in Lower Mickletown, Leeds

Chip and crack repairs to enamel, acrylic and cast iron baths in Lower Mickletown, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • A cracked acrylic bath
  • Holes from dropped items
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Lower Mickletown

About our bath repair in Lower Mickletown

Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Our technicians work on acrylic, cast iron enamel and roll-top & freestanding, and common reasons people contact us are chips on the rim or sides and a cracked acrylic bath.

Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.

Bath enamel chip by the waste, filled and colour matched (before and after)
Location
Lower Mickletown (LS26)
Area hub
Leeds
Warranty
A year, on every repair
Price
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Page updated
23 October 2026

Questions from Lower Mickletown

Can rust on a bath be repaired?

Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.

Is a holed acrylic bath repairable?

Frequently, if there’s access underneath. We back the hole, fill it and refinish the surface.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Is a repair better than a new one?

Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.

Is a cracked acrylic bath repairable?

Normally, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a picture.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time that suits you.

What happens once I’ve sent photos?

We review the photos and send a fixed quote and the next dates we have.

Can I get a quote without a visit?

In nearly every case. If pictures don’t show enough, we’ll ask for another angle.

What a repair cannot fix

A few problems are outside what a surface repair can do:

  • A steel bath rusted through
  • A whole bath that is dull or worn, where a full re-enamel is the better fix
  • Acrylic cracks with no access behind them

Not sure? Send photos and we will give you a straight answer.

Materials we work on in Lower Mickletown

  • Acrylic
  • Whirlpool & spa baths
  • Cast iron enamel
  • Roll-top & freestanding
  • Pressed steel enamel

What happens on the day

From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes a morning or an afternoon, depending on what we find, and we finish with a tidy-up and a look at the finished work together.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, normally the day after.

Getting ready for the visit

  • Have a window or extractor fan available
  • Keep children and pets away from the room on the day
  • Keep a parking space free if you can

Get a quote

For a price in Lower Mickletown, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Get a free quote

Advice

Aftercare tips

It’s all simple stuff, just a few sensible habits:

  • Protect the bath with a towel when doing jobs nearby
  • Give the bath a quick rinse after use
  • Ensure an acrylic bath is firm underfoot
  • Do not leave razors or cans standing in the bath

Don’t leave razors, cans or hair grips in the bath, as they can leave rust marks. A dripping tap should be fixed early, too.

Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.

About Lower Mickletown

Lower Mickletown is about 2 miles north-west of Castleford, in Leeds. Our repair technicians come to clients in Lower Mickletown, so there’s no workshop to go to. We cover all 198 towns and villages in Leeds, from the larger towns to small villages. You can also see our page for Leeds, about 8 miles away.

Every address in LS26 is covered, from the main roads to the quietest streets. If you’re just outside Lower Mickletown, we cover Allerton Bywater (1 mile north-east), Woodend (1 mile north), Great Preston (1 mile north), Whitwood (2 miles south) and Castleford (2 miles south-east). Within a short drive, we also cover Leeds (8 miles north-west), Morley (9 miles west), Pudsey (12 miles west), Rothwell (4 miles west), Beeston (8 miles west) and Farsley (13 miles north-west).

What’s near Lower Mickletown

Locally, our jobs take us to homes close to Methley Primary School, St Aidan's and St Mary the Less and the streets around them. Other local landmarks include Brigshaw High School (1.3 miles north) and Commercial Hotel (0.6 miles west). The closest station to Lower Mickletown is Castleford station, roughly 1.5 miles south-east of the centre. Nearby you’ll also find Queen's Mill (1.4 miles south-east) and Municipal Borough of Castleford (1.6 miles south-east). Not far away are St Aidan's and Lemonroyd Lake.

Map of Lower Mickletown © OpenStreetMap contributors

Should I try a DIY kit first?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

How we price bath repair

Prices start from £95. Every quote is fixed and free. What we look at:

  • The type of damage
  • Where the damage is and how we get to it
  • The material and finish
  • Whether old repairs or coatings need taking off

No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

Send photos for a quote

It only takes a minute to photograph the damage, and it saves a visit. Try to send:

  • A coin or ruler next to the damage for scale
  • The postcode, so we can plan the visit
  • Natural light rather than flash
  • Any earlier repairs or coatings

Email us a picture of the damage and one of the whole item, with your LS26 postcode, and we will come back with a fixed quote.

Materials and what they mean for the repair

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.

Repairing versus replacing in Lower Mickletown

When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Prices start from £95. We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why Lower Mickletown clients choose us

  • Most jobs done in one visit
  • Same prices wherever you are
  • Dust sheets down, tidy finish
  • Everything repaired in place

Read our full price list and resurfacing vs replacement cost guide.

Do you need bath repair in Lower Mickletown?

Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, a chip that reaches the metal will start to rust.

You may need us if you’ve spotted:

  • Rusty patches near the plughole
  • Hairline or through cracks in acrylic
  • Damage done while the bathroom was being fitted
  • A chipped rim or side

Before booking anyone

  • How to care for the finish
  • How the room is protected while they work
  • Who turns up on the day
  • A fixed price, and whether VAT is included

10 questions to ask before booking

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.