South Gloucestershire · England
Bath Repair for Lower Morton homes
Fixed-price bath repair in Lower Morton and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Snagging damage from a refit
- Chips along the edge of the bath
Common questions in Lower Morton
Can you redo someone else’s repair?
Typically, yes. The old repair comes out first, so mention it when you send pictures.
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Do you come to Lower Morton?
Yes, we do. Repair technicians travel to Lower Morton from across the region, with no extra charge for travel.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Will the repair show?
We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Which areas do you work in?
We cover the entire UK, including Lower Morton and the rest of South Gloucestershire. Send your postcode with your photos and we will confirm dates.
What does bath repair cost?
Repairs from £95. We give a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Bath repair at your home in Lower Morton
Most of our bath repairs take a few hours, and you can normally bathe again the following day. You will not need a plumber or tiler, because nothing is disconnected. Our repair technicians work on cast iron enamel, pressed steel enamel and whirlpool & spa baths, and people most often call us about a failed DIY repair that’s discoloured or lifting and a chip where the taps sit.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Lower Morton (BS35)
- Area hub
- South Gloucestershire
- Cover
- One year on every repair
- Price
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What we do, step by step
We turn up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. Most visits take a few hours, depending on the damage, and we leave the room as we found it.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can generally use the bath the next day.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Mention if the room is upstairs or in a flat
- Move bottles, mats and clutter away from the area
Get a quote
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Related advice
Repair or replace: which is better?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Prices start from £95. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- No extra charge for your area
- Every repair guaranteed for a year
- A fixed quote before you book
- Honest advice, even when it means no job
Read our pricing and resurfacing vs replacement cost guide.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
When we’d advise against a repair
To be straight with you, there are a few things a repair won’t fix:
- Acrylic cracks with no access behind them
- A bath worn all over, where resurfacing makes more sense
- Flexing caused by a failed cradle or loose feet
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
We work for landlords, letting agents and housing providers in Lower Morton as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Keeping it looking good
So the finish stays in good condition for years:
- Store metal items away from the bath
- Protect the bath with a towel when doing jobs nearby
- Check that an acrylic bath doesn’t move when you stand in it
- Avoid scourers, wire wool and gritty cream cleaners
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust sets in.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
What bath repair costs
Prices start from £95. There are no hourly rates or hidden extras. The price depends on:
- How many items we do on one visit
- The material
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Quotes from your photos
Two or three clear photos are generally enough. It helps if you send:
- Something in shot to show the size
- A photo taken from further back
- Any earlier repairs or coatings
- Where you are, by postcode
There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Towns and villages near Lower Morton
Also in Lower Morton
Covering Lower Morton
Lower Morton is about 1 mile north of Thornbury, in South Gloucestershire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Lower Morton is one of 110 places in South Gloucestershire we cover. Our nearest city page is Birmingham, about 64 miles away.
Every address in BS35 is covered. Other places close to Lower Morton include Duckhole (1 mile north), Morton (1 mile south), Upper Morton (1 mile east), Thornbury (1 mile south) and Rockhampton (1 mile north). We also work in nearby towns such as Kingswood (12 miles south), Mangotsfield (9 miles south), Yate (7 miles south-east), Fishponds (10 miles south), Bradley Stoke (7 miles south) and Patchway (7 miles south).
Around Lower Morton
Typical jobs here are in homes near Manorbrook Primary School, Morton Baptst Church and The Castle School, among other places. Nearby you’ll also find Thornbury Castle (0.9 miles south-west) and Thornbury and District Museum (1.3 miles south). The countryside around Lower Morton includes Red Hill.
About our accreditations · Every repair comes with a one-year guarantee.
