Dorset · England

Bath Repair in Lulworth Cove

Bath repair in and around Lulworth Cove: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • Repairs from £95
  • Damage done while the bathroom was being fitted
  • Chips on the rim or sides
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Lulworth Cove homes

What affects the price in Lulworth Cove

Prices start from £95. There’s no area surcharge for Lulworth Cove. The price reflects:

  • Whether it’s a chip, crack, burn or wear
  • Any earlier repairs that need removing first
  • How easy the damage is to reach
  • How hard the colour is to match

Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

How to get a fixed quote

When you take your pictures, a few simple things make all the difference:

  • The material, if you know it
  • Details of any past repairs
  • Where you are, by postcode
  • Good light, ideally daylight, without flash glare

If you’re in Lulworth Cove and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Bath repair at your home in Lulworth Cove

A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the next day. We work on pressed steel enamel, cast iron enamel and roll-top & freestanding, and the jobs we see most are deep scratches in acrylic and rust spots around the plughole.

Every repair is covered by our one-year guarantee, wherever you are in Dorset.

Rusty chip next to a bath plughole, before and after repair
Where
Lulworth Cove (BH20)
County
Dorset
Guarantee
One year on every repair
Quotes
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026

Looking after it afterwards

How the surface is treated afterwards matters:

  • Do not leave razors or cans standing in the bath
  • Clean with warm water and a mild detergent
  • Have new chips seen to early
  • Avoid scourers, wire wool and gritty cream cleaners

There’s nothing special to do after a repair. Skip bleach and gritty creams and give it a rinse after each bath.

Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.

Lulworth Cove: your questions answered

Can you fix rust around the plughole?

Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.

What does bath repair cost?

Repairs from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.

Will the price change on the day?

The price is fixed for what the photos show. Anything extra is discussed before we begin.

Will the repair show?

We aim for a repair you cannot easily find. The rest of the bath’s condition makes a difference.

How long before I can use the bath?

Normally within a day, though it depends on what we’ve done.

Is there a call-out fee?

Travel is included in the price, with the same prices everywhere we work.

How soon can you come?

We’ll give you dates with your quote. Tell us if you need it done quickly.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as homeowners in Lulworth Cove.

Signs you need bath repair in Lulworth Cove

Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.

The things clients generally mention when they call are:

  • A chipped rim or side
  • A chip where the taps sit
  • Holes from dropped items
  • Rust spots around the plughole

What to look for in a quote

  • If travel is included in the price
  • A fixed price, and whether VAT is included
  • How changes to the job are handled
  • How soon you can use it again

10 questions to ask before you book

Repairs by material

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Cast iron

Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.

About Lulworth Cove

Lulworth Cove is about 9 miles east of Weymouth, in Dorset. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our repair technicians cover 462 places in Dorset.

Our visits in BH20 are booked in the same way as anywhere else. Jobs here include addresses on Main Road and Britwell Drive. Neighbouring places we cover include West Lulworth (1 mile north), Lulworth Camp (1 mile north-east), Chaldon Herring (3 miles north-west), Coombe Keynes (3 miles north-east) and Winfrith Newburgh (3 miles north). Larger places within reach include Weymouth (9 miles west), Dorchester (11 miles north-west), Broadstone (15 miles north-east), Corfe Mullen (15 miles north-east), Swanage (13 miles east) and Portland (10 miles south-west).

Landmarks near Lulworth Cove

Around Lulworth Cove, we work in homes near Parish Church of the Holy Trinity and Lulworth and Winfrith CofE VC Primary School, among other places. For rail, the closest station is Wool station, about 4.5 miles north of the centre. Open spaces near Lulworth Cove include Tadnoll and Winfrith Heath and Hambury Tout.

Map of Lulworth Cove © OpenStreetMap contributors

Honest limits

We will not take on work that will not last, so here’s what a repair cannot put right:

  • Leaking fittings, which need a plumber
  • Cracks in acrylic we can’t reach from underneath
  • A whole bath that is dull or worn, where a full re-enamel is the better fix

If in doubt, send pictures and we’ll say what we think before you book.

Surfaces we repair

  • Roll-top & freestanding
  • Pressed steel enamel
  • Acrylic
  • Whirlpool & spa baths
  • Cast iron enamel

Can I fix it myself?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.

How it works

You do not need to empty the room. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we’re doing. Most jobs take a morning or an afternoon, and you can get on with other things while we are there.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. Next we fill the damage and sand it smooth and level.
  3. The colour is mixed on the spot to match your bath.
  4. We build up the finish and polish it into the surrounding enamel.
  5. We leave it to cure; you can normally use the bath the next day.

Before we arrive

  • Move bottles, mats and clutter away from the area
  • Tell us about any previous repairs or coatings
  • Tell us if there are stairs or a lift

Get a quote

Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and you are under no obligation.

Get a fixed quote

Related advice

Work for landlords and builders

Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.