Herefordshire · England
Bath Repair in Luston
Problem with your bath in Luston? We repair it in place, match it on site and guarantee the work for a year.
- Repairs from £95
- A chipped rim or side
- Holes from dropped items
About our bath repair in Luston
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath. Most baths can be used again the following day. If you are dealing with damage done while the bathroom was being fitted and chips under the taps, we can normally put it right, on whirlpool & spa baths, roll-top & freestanding and cast iron enamel alike.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Luston (HR6)
- County
- Herefordshire
- Warranty
- One year on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What affects the price in Luston
Prices start from £95. We price every job individually. The main factors are:
- What the surface is made of
- How much damage there is
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Send photos for a quote
Good photos mean an accurate price. Here’s what we find most useful:
- Any details about the material
- A coin beside the damage so we can judge size
- Natural light rather than flash
- One sharp close-up of the damage
If you are in Luston and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Repair or replace in Luston?
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. A repair keeps it in place. Repairs from £95, with every job priced individually. Set against the cost of replacement, repairing generally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why book with us
- Most jobs done in one visit
- One-year guarantee on every repair
- A fixed quote before booking
- Repair technicians who travel to you, UK-wide
Take a look at our prices page or guide to resurfacing and replacement costs.
Materials and what they mean for the repair
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.
Aftercare tips
After the repair has cured, a few habits help it last:
- Do not leave razors or cans standing in the bath
- Have new chips seen to early
- Fix dripping taps early to stop staining and limescale
- Avoid scourers, wire wool and gritty cream cleaners
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine, avoiding abrasives.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Your questions about bath repair in Luston
What information do you need?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
How do I get a price for bath repair in Luston?
Repairs from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Do you come to Luston?
Yes. We work across the UK and travel to Luston and the rest of Herefordshire. Send us photos for a fixed quote, or call 0345 017 0787.
Is the work guaranteed?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders in Luston.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Luston and nearby
Luston is about 15 miles north of Hereford, in Herefordshire. We visit customers in Luston and the surrounding area, so there is no workshop to go to. We work in all 255 towns and villages across Herefordshire. We work right across the region, from Luston to Birmingham (39 miles away).
Here we cover the HR6 postcode area. Local streets include Townsend Park, Westland View and Eye Lane, and we cover them all. Other places close to Luston include Eye (1 mile north-east), Bicton (1 mile west), Yarpole (2 miles north-west), Bircher (2 miles north-west) and The Broad (2 miles south). Within a short drive, we also cover Hereford (15 miles south), Leominster (3 miles south), Whitecross (14 miles south), Eign Hill (15 miles south), Widemarsh (14 miles south) and Bartonsham (15 miles south).
Landmarks near Luston
Typical jobs here are in homes near Church of St Peter and St Paul, Luston Primary School and The Balance Inn, among other places. The nearest railway station is Leominster station, roughly 3 miles south. A little further out are Earthworks SE of Lower Ashton Farm (2.1 miles east). The countryside around Luston includes Dionscourt Hill.
What we can’t put right
Not everything can be repaired, and we’ll tell you before we start. Repairs won’t solve:
- A bath worn all over, where resurfacing makes more sense
- Metal that has corroded all the way through
- Leaking fittings, which need a plumber
If in doubt, send pictures and we’ll say what we think.
What we work on
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
The process
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take two to three hours for most chips. We clean up when we’re done and let you know when you can use it again.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Keep pets and children out of the room while we work
- Have a window or extractor fan available
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Advice
What we’re called out for in Luston
Rust usually starts where water sits, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Typical reasons for a call-out include:
- Chips along the edge of the bath
- A kit repair that didn’t last
- Damage done while the bathroom was being fitted
- Rusty patches near the plughole
Before you book anyone
- Whether they match the colour on site
- If travel is included in the price
- How your room will be protected
- A fixed quote, and whether VAT is included
Other services in Luston
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
About our accreditations · Every repair comes with a one-year guarantee.
