Gloucestershire · England

Bath Repair for Lydbrook homes

Chip and crack repairs to enamel, acrylic and cast iron baths in Lydbrook, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Rust spots around the plughole
  • Damage done while the bathroom was being fitted
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Lydbrook

Bath repair in Lydbrook without replacing anything

Whatever the damage, the aim is the same: a repair that’s smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. If you are dealing with a kit repair that didn’t last and holes from dropped items, we can help, on cast iron enamel, roll-top & freestanding and acrylic alike.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Before and after: a chipped, rust-stained bath around the plughole
Where
Lydbrook (GL17)
Area hub
Gloucestershire
Cover
A year, on every repair
Price
From £95. Fixed and free, based on pictures
Telephone
0345 017 0787
Page updated
23 October 2026

What we do, step by step

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes a few hours. We tidy up before we leave and let you know when you can use it again.

  1. Dust sheets and masking go down around the bath.
  2. The damaged area is cleaned, keyed and degreased.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the next day.

Getting ready for the visit

  • Ensure the room can be ventilated
  • Clear toiletries, mats and anything else from around the area
  • Mention if the room is upstairs or in a flat

Getting a price

Most clients in Lydbrook get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

Get a free quote

Advice

For landlords and businesses

Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

Housing associations and facilities teams use us for planned and reactive repairs in Gloucestershire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

DIY kit or professional repair?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

Aftercare tips

Much of the damage we repair could have been avoided. These habits help:

  • Get any new chip repaired before it rusts
  • Avoid scourers, wire wool and gritty cream cleaners
  • Rinse it down after each bath
  • Make sure an acrylic bath is firm underfoot

Do not leave razors, cans or hair grips in the bath, because they can mark the enamel. A dripping tap should be fixed early, too.

If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and water can get through to the floor below.

What bath repair costs

Prices start from £95. You will know the full cost before you book. We look at:

  • The material
  • The size and number of damaged areas
  • How many items we do on one visit
  • Previous DIY repairs that have to come out

The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before you book.

Getting a price from photos

Phone photos are fine, there’s no need for anything special. Make sure they show:

  • Daylight if possible, and no flash reflection
  • A picture taken from further back
  • A coin beside the damage so we can judge size
  • Where you are, by postcode

Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and no obligation.

Your questions about bath repair in Lydbrook

How invisible is a bath repair?

On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.

How much does bath repair cost in Lydbrook?

Prices start from £95. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.

How long before I can use the bath?

Normally by the following day, depending on the repair.

Is a bath repair permanent?

Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.

Can rust on a bath be repaired?

Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.

How do I book?

Send pictures through the quote form or call 0345 017 0787, and we will take it from there.

Is my repair covered?

Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.

Is there a call-out fee?

There is no separate call-out charge. Your fixed quote includes everything.

Signs you need bath repair in Lydbrook

Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, and the damage isn’t always spotted until later. Snagging repairs like these are a regular job for us.

The things clients usually mention when they call are:

  • Impact holes in acrylic
  • A kit repair that didn’t last
  • Rusty patches near the plughole
  • Chips under the taps

Questions to ask before you book

  • Whether the price covers travel
  • Whether cleaning and preparation are in the price
  • How to care for the finish
  • How changes to the job are handled

10 questions to ask before booking

Repairs by material

Cast iron

Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.

Acrylic

Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.

Our work in Lydbrook

Lydbrook is about 5 miles south of Ross-on-Wye, in Gloucestershire. Our technicians come to homes and businesses in Lydbrook, so you do not need to take anything anywhere. Lydbrook is one of 470 places in Gloucestershire where we work. We work right across the region, from Lydbrook to Birmingham (about 52 miles away).

Jobs in GL17 are booked in the same way as anywhere else. That includes homes on New Road, Rocks Road and Uphill Road and the roads around them. We also travel to Joys Green (1 mile north), The Pludds (1 mile east), Welsh Bicknor (1 mile north), Brierley (2 miles east) and Ruardean (2 miles north-east). Within a short drive, we also cover Gloucester (15 miles east), Quedgeley (13 miles east), Lydney (8 miles south), Tredworth (14 miles east), Kingsway Village (13 miles east) and Cam (13 miles south-east).

Landmarks near Lydbrook

Around Lydbrook, we work in homes near Lakers School, Lydbrook Primary School and Holy Jesus' Church. Well-known places in the area include Kirbee Rural Crafts Museum (3.4 miles west) and Dilke Memorial Hospital (3.2 miles south-east). Green spaces nearby include Ruardean Hill and Foxes Bridge Bog.

Map of Lydbrook © OpenStreetMap contributors

When a repair isn’t the answer

Before you book, it’s worth knowing the limits too:

  • A bath that moves underfoot, until its support is fixed
  • Cracks in parts of an acrylic bath we cannot get to from below
  • Metal that has corroded all the way through

If in doubt, send photos and we will say what we think before you book.

Surfaces we repair

  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Acrylic
  • Cast iron enamel
  • Pressed steel enamel
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.