Surrey · England
Bath Repair for Lyne homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Lyne. Free, fixed quotes from your pictures.
- Repairs from £95
- Cracks in an acrylic bath
- Rust spots around the plughole
Landlord and trade work in Lyne
We work for landlords, letting agents and housing providers in Lyne as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We carry out planned and one-off repairs for housing associations and facilities teams in Surrey and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
How we handle bath repair in Lyne
A typical bath repair is a few hours’ work, and the bath is back in use the following day. There’s no need to book a plumber or tiler, because nothing is disconnected. If you are dealing with a failed DIY repair that’s discoloured or lifting and rusty patches near the plughole, we can generally put it right, whatever the material.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Location
- Lyne (KT16)
- County
- Surrey
- Warranty
- One year on every repair
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Should you replace it?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Prices start from £95. We charge the same wherever you are, with no extra for Lyne. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why us?
- Colour-matched on site
- Free fixed quotes from pictures
- Generally one visit, start to finish
- Everything repaired in place
See our full price list and bath cost comparison.
How to care for the repair
It’s all simple stuff:
- Get a dripping tap fixed promptly
- Make sure an acrylic bath is firm underfoot
- Keep metal cans and razors off the surface
- Stick to mild cleaners and a soft cloth
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
More services for Lyne
The process
Your technician turns up when we said we would, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before any work starts. Most visits take a few hours, and we leave the room as we found it.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Let us know about parking or access
- Mention any earlier repairs or resurfacing
- Have somewhere for us to park nearby if possible
Get a quote
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Read more
How we price bath repair
Prices start from £95. You will know the full cost before you book. We take into account:
- Previous DIY repairs that have to come out
- Doing more than one item at once
- Where the damage is and how we get to it
- How much damage there is
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Quotes from your photos
A couple of clear pictures is all it takes. It helps if you send:
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
- Where you are, by postcode
- One sharp close-up of the damage
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
When to call us in Lyne
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Fittings cause damage too: water sits around them, and any chip there soon rusts.
Customers generally contact us about:
- An old repair that has yellowed or come loose
- Rusty patches near the plughole
- Hairline or through cracks in acrylic
- Chips along the edge of the bath
Questions to ask before booking
- Is the price fixed, and does it include VAT?
- Whether the price covers travel
- How long the guarantee is and what it covers
- Aftercare advice
Lyne: your questions answered
Which areas do you work in?
The whole UK, including all of Surrey. Send your postcode with your pictures and we will offer you dates.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
How do I book?
Send photos through the quote form or call 0345 017 0787.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
How long before I can use the bath?
Usually within a day, depending on the repair.
Is a bath repair permanent?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.
What we can’t put right
A few problems are outside what a surface repair can do:
- A steel bath rusted through
- Cracks in acrylic we can’t reach from underneath
- A bath worn all over, where resurfacing makes more sense
Send us photos and we will tell you honestly.
Materials we repair
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
Lyne and nearby
Lyne is about 3 miles south of Egham, in Surrey. Wherever you are in the KT16 postcode area, we come to you. Lyne is one of 395 places in Surrey we cover. Our jobs stretch from Lyne to London (about 21 miles away).
Postcode districts we cover here: KT16. From Almners Road, Pantiles Close and Lyne Lane or a nearby road, we can come to you. Other places close to Lyne include Chertsey (1 mile east), Trumps Green (2 miles west), Ottershaw (2 miles south), Stonehill (2 miles south-west) and Row Town (2 miles south-east). We also work in nearby towns such as Guildford (10 miles south), Woking (5 miles south), Camberley (9 miles south-west), Epsom (12 miles east), Ewell (12 miles east) and Egham (3 miles north).
Local landmarks in Lyne
Our clients here include homes close to Riverside Walk, Salesian School and Church of Holy Trinity. Nearby too are Lyne and Longcross CofE Aided Primary School (0.5 miles south-west) and White Lodge Children's Centre (0.8 miles south-east). The nearest railway station is Chertsey station, about 1.2 miles east. A little further out are Spelthorne Museum (3.3 miles north) and St. Peter's Hospital (0.8 miles south-east). Not far away are St Ann's Hill and St Ann's Lake.
About our accreditations · Every repair comes with a one-year guarantee.
