Worcestershire · England

Bath chip & crack repair in Malvern Wells, Worcestershire

Fixed-price bath repair in Malvern Wells and the surrounding area, typically in one visit.

  • Repairs from £95
  • A cracked acrylic bath
  • Rusty patches near the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Malvern Wells

Bath repair in Malvern Wells, done in place

Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. Nothing is unplumbed, your tiles stay as they are, and the repaired area is colour-matched so it blends in. Whether it’s holes from dropped items and an old repair that has yellowed or come loose, we can help, whatever the material.

Your repair is guaranteed for a year, as with every job we do.

Location
Malvern Wells (WR14)
County
Worcestershire
Warranty
12 months on all our work
Price
From £95. Free, fixed price from pictures
Call
0345 017 0787
Page updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

Can I fix it myself?

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

When to call us in Malvern Wells

Dropped items cause the majority of chips, and building work is a common culprit. Cracks in acrylic have a different cause: the bath isn’t properly supported, so it flexes under weight.

Look out for any of the following:

  • Rust spots around the plughole
  • Chips along the edge of the bath
  • A failed DIY repair that’s discoloured or lifting
  • A chip where the taps sit

What to look for in a quote

  • How long the guarantee is and what it covers
  • What aftercare is recommended
  • What protection goes down before work starts
  • Whether a trained technician does the job

How to compare quotes

Keeping it looking good

Simple care helps the repair last. Our advice:

  • Clean with warm water and a mild detergent
  • Check that an acrylic bath doesn’t move when you stand in it
  • Keep metal cans and razors off the surface
  • Fix dripping taps early to stop staining and limescale

Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.

If water is getting through a crack, stop using the bath until it’s repaired. Leaks under a bath can damage floors and ceilings.

Why repair rather than replace?

When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we will tell you. Our bath repair starts from £95. Compared with replacing, repairing normally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.

Why Malvern Wells clients choose us

  • Every repair guaranteed for a year
  • Rooms protected and left tidy
  • Accredited with CHAS, Constructionline and SafeContractor
  • A fixed quote before you book

See our full price list and guide to resurfacing and replacement costs.

Your questions about bath repair in Malvern Wells

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as householders.

Do you work in Malvern Wells?

Yes. We cover the entire UK and travel to Malvern Wells. Send photos and we’ll quote, or call 0345 017 0787.

Can rust on a bath be repaired?

Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

Will it make a mess?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

Does someone need to be in?

Yes. We need access to the room while we work, at a time that suits you.

Is my repair covered?

Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.

Can you redo someone else’s repair?

Generally, yes. Tell us what was done before.

What affects the price in Malvern Wells

Prices start from £95. A fixed quote means you know the cost before you book. We take into account:

  • The type of damage
  • How many areas need work
  • Whether we combine several jobs
  • Previous DIY repairs that have to come out

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.

Send pictures for a quote

Good pictures mean an accurate price. Here’s what helps:

  • Where you are, by postcode
  • Any details about the material
  • A close-up of the damage, in focus
  • Any earlier repairs or coatings

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.

What your bath is made of matters

Composite and resin

Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour matched, just like other baths.

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so repair chips early.

When we’d advise against a repair

It helps to know what we can’t do too:

  • Leaking fittings, which need a plumber
  • A whole bath that is dull or worn, where a full re-enamel is the better fix
  • A bath that moves underfoot, until its support is fixed

If in doubt, send photos and we’ll say what we think.

What we work on

  • Pressed steel enamel
  • Whirlpool & spa baths
  • Acrylic
  • Cast iron enamel
  • Roll-top & freestanding

How it works

From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes two to three hours for most chips, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. First, we check the damage against your pictures and agree the plan.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. Finally, it’s polished to match the shine and left to cure.

Before we arrive

  • Let the surface dry out before the visit
  • Let us know about parking or access
  • Keep a parking space free if you can

Getting a price

There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

Send pictures for a quote

Read more

About Malvern Wells

Malvern Wells is about 3 miles south of Great Malvern, in Worcestershire. Wherever you are in the WR14 postcode area, we come to you. Malvern Wells is one of 376 places in Worcestershire where we work. You can also see our page for Birmingham, about 33 miles away.

Jobs in WR14 are booked in the same way as anywhere else. We regularly work on streets such as Wells Road, Oaklands and Holywell Road. Neighbouring places we cover include Upper Welland (1 mile south-east), Upper Colwall (1 mile north), Evendine (1 mile south-west), Wyche (1 mile north) and Colwall Stone (1 mile west). Larger places within reach include Worcester (10 miles north-east), Great Malvern (3 miles north), Droitwich Spa (15 miles north-east), Pershore (11 miles east), Warndon (11 miles north-east) and Rainbow Hill (10 miles north-east).

Around Malvern Wells

Around Malvern Wells, we work in homes near The Chase, St Wulstan's Roman Catholic Church and Malvern Wells CofE Primary School. Other local landmarks include The Hawthorn Inn (0.8 miles south-east) and The Downs (1.2 miles north-west). The nearest railway station is Colwall station, about 1.1 miles west. A little further out are Malvern Museum of Local History (2.3 miles north) and British Camp (1.6 miles south-west). Green spaces nearby include Brotheridge Green Nature Reserve and Pinnacle Hill.

Map of Malvern Wells © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.