West Sussex · England

Bath Repair in Mannings Heath

Bath repair for Mannings Heath, without a refit. Send us photos for a fixed price, then we come to you.

  • Repairs from £95
  • Rust by the waste and overflow
  • Chips along the edge of the bath
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Mannings Heath homes

About our bath repair in Mannings Heath

Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in one visit. Whether it’s scuffs and scratches in the surface and a cracked acrylic bath, we can help, on pressed steel enamel, cast iron enamel and roll-top & freestanding alike.

You get a one-year guarantee, the same in Mannings Heath as everywhere else we work.

Where
Mannings Heath (RH13)
Area hub
West Sussex
Guarantee
12 months on all our work
Quotes
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026
Before and after: a damaged acrylic bath corner repaired in place

Repair or replace in Mannings Heath?

A new bath brings a chain of other jobs: tiles along the rim generally crack when it comes out, a new panel is frequently needed, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Prices start from £95. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your photos, so there are no surprises on the day.

Why Mannings Heath clients choose us

  • Colours mixed by hand to suit your surface
  • We’ll tell you if it’s not worth repairing
  • Fixed prices from your pictures
  • We come to you, anywhere in the UK

Take a look at our full price list and guide to resurfacing and replacement costs.

What bath repair costs

Repairs from £95. We don’t charge extra for travel to Mannings Heath. The price depends on:

  • Whether it’s a chip, crack, burn or wear
  • Doing more than one item at once
  • Where the damage is and how we get to it
  • The material and finish

Compared with replacing, repairing usually costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.

Quotes from your photos

We price nearly every job from pictures. This is what to send:

  • Natural light rather than flash
  • The material, if you know it
  • A clear, close picture of the problem area
  • Where you are, by postcode

You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.

Our work in Mannings Heath

Mannings Heath is about 2 miles south-east of Horsham, in West Sussex. Clients in Mannings Heath get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. Mannings Heath is one of 371 places in West Sussex we cover. Our nearest city page is London, about 32 miles away.

Jobs in RH13 work the same way as everywhere else we cover. Local streets include Church Road, Ryecroft Meadow and Masons Field, and we cover them all. Nearby, we also work in Monk's Gate (1 mile south), Lower Beeding (1 mile south-east), Roffey (2 miles north), Plummers Plain (2 miles east) and Crabtree (2 miles south-east). Within a short drive, we also cover Crawley (6 miles north-east), Haywards Heath (9 miles east), Burgess Hill (9 miles south-east), East Grinstead (13 miles north-east), Shoreham-by-Sea (14 miles south) and Lancing (15 miles south).

Landmarks near Mannings Heath

Our customers here include homes close to The Forest School, The Dun Horse pub and Church of the Good Shepherd. The closest station to Mannings Heath is Horsham station, about 2.1 miles north-west of the centre. Well-known places in the area include Christs Hospital School Museum (3.5 miles west) and Horsham Hospital (2.5 miles north-west). For a walk, there’s Warnham LNR.

Map of Mannings Heath © OpenStreetMap contributors

Common questions in Mannings Heath

Can you fix rust around the plughole?

Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.

I’m a tenant. Can you help?

We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.

How invisible is a bath repair?

On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.

How do I book?

Use the quote form or ring 0345 017 0787, and we will take it from there.

It’s been repaired before. Can you still fix it?

Normally, yes. The old repair comes out first, so let us know about it.

Will you leave a mess?

No. The work area is masked and covered, and we take our waste away with us.

What happens if you find more damage?

Your quote covers the damage in the photos. Anything extra is discussed before we begin.

When can you do it?

It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.

Signs you need bath repair in Mannings Heath

Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.

Most people contact us after spotting one of these:

  • Snagging damage from a refit
  • Impact holes in acrylic
  • A cracked acrylic bath
  • Chips along the edge of the bath

Comparing quotes

  • What happens if the damage is worse than the photos show
  • How your room will be protected
  • What preparation is included
  • A fixed price, and whether VAT is included

10 questions to ask before booking

The process

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes two to three hours for most chips. We clean up when we’re done and let you know when you can use it again.

  1. First, we check the damage against your photos and agree the plan.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. We tint the finish by hand to match the bath.
  5. The repair is polished to the same gloss as the bath and left to cure.

How to prepare

  • Tell us about any previous repairs or coatings
  • Open a window if you can
  • Tell us about parking, stairs or access

Get a quote

Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed price. There is no charge for the quote and no obligation.

Send pictures for a quote

Related advice

What your bath is made of matters

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Can I fix it myself?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

Looking after it afterwards

Simple care helps the repair last. Our advice:

  • Keep abrasive pads and gritty cleaners away from the bath
  • Put a towel in the bath if you are working above it
  • Get a dripping tap fixed promptly
  • Use a soft cloth and washing-up liquid for everyday cleaning

In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath without abrasive products.

Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.

What a repair can’t fix

We’ll always be straight with you, so here’s what a repair cannot fix:

  • Water coming from the waste or taps rather than the bath
  • A bath that moves underfoot, until its support is fixed
  • Wear across the whole surface, which needs re-enamelling

Send us photos and we will tell you honestly.

Materials we repair

  • Whirlpool & spa baths
  • Pressed steel enamel
  • Cast iron enamel
  • Roll-top & freestanding
  • Acrylic
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.