Greater London · England
Bath Repair for Manor House homes
Local bath repair for Manor House: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- An old repair that has yellowed or come loose
- Rust spots around the plughole
When to call us in Manor House
A cracked acrylic bath generally wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move.
It’s worth getting a quote if you see:
- Damage beneath the taps
- Holes from dropped items
- Scratches you can feel with a fingernail
- Cracks in an acrylic bath
What your quote should include
- When it can be used again
- What prep work is covered
- How the room is protected while they work
- A fixed quote, and whether VAT is included
Bath repair in Manor House, done in place
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We are often asked to fix rust spots around the plughole and a failed DIY repair that’s discoloured or lifting, in cast iron enamel, roll-top & freestanding and acrylic.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Location
- Manor House (N4, N16, N15)
- Area hub
- Greater London
- Cover
- One year on every repair
- Quote
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath repair
Repairs from £95. We give every job a fixed price from pictures. These are the things that affect it:
- How many areas need work
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
We charge the same wherever you are, so there’s no premium for Manor House. What changes the price is the job itself: the material, the amount of damage and how many items.
Getting a price from photos
When you take your photos, a few simple things make all the difference:
- Any earlier repairs or coatings
- Where you are, by postcode
- Any details about the material
- Something in shot to show the size
If you’re in Manor House and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- Get any new chip repaired before it rusts
- Rinse it down after each bath
- Use a soft cloth and washing-up liquid for everyday cleaning
- Keep abrasive pads and gritty cleaners away from the bath
Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
What we cannot put right
A repair is not right for every job, for example:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Wear across the whole surface, which needs re-enamelling
- A steel bath rusted through
Send us photos and we’ll tell you honestly.
Materials we repair
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
Also near Manor House
Other services in Manor House
Repair or replace: which is better?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Prices start from £95. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Why us?
- Straight answers about what a repair can do
- Same prices wherever you are
- Work done at your home or business
- CHAS, Constructionline and SafeContractor accredited
Read our pricing and resurfacing vs replacement cost guide.
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Manor House and the surrounding area
Manor House is about 1 mile north of Highbury, in Greater London. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Manor House is one of 764 towns and villages in Greater London where we work.
Postcode districts we cover here: N4, N16 and N15. That includes homes on Vale Road, Eade Road and Swan Lane and the roads around them. Being close to the A503, Manor House is easy for our repair technicians to reach. Nearby, we also work in Harringay (1 mile north), St Ann's (1 mile north-east), Stoke Newington (1 mile south-east), Stamford Hill (1 mile east) and West Green (1 mile north). Within a short drive, we also cover London (5 miles south), City of Westminster (5 miles south-west), Marylebone (4 miles south-west), Kensington (7 miles south-west), St Pancras (3 miles south) and Shoreditch (3 miles south).
Landmarks near Manor House
Locally, our jobs take us to homes close to Arts and Media School Islington, Church of St Olave and Church of St Andrew and the streets around them. Nearby too are Woodberry Down Community Primary School (less than half a mile north-east), Woodberry Down School (less than half a mile east), Beaconsfield pub (within half a mile north) and Chestnuts Park (0.8 miles north). Manor House has its own railway station: Harringay Green Lanes station. Further afield, we also cover the area around City of London Maternity Hospital (1 mile west) and Arsenal Football Club Museum (1.2 miles south-west). The countryside around Manor House includes Woodberry Wetlands and Highgate Hill.
- Local facilities include Hornsey (1.1 miles north-west)
How the visit works
Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Allow a few hours from start to finish. Before leaving, we tell you when it can be used and how to look after it.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the following day.
How to prepare
- Move bottles, mats and clutter away from the area
- Open a window if you can
- Mention if the room is upstairs or in a flat
How to get a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Advice
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
FAQs for Manor House
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before and we’ll plan for it.
Can I add another job to the visit?
Yes. Doing several items on one visit generally costs less than separate visits. Include pictures of each item.
Will there be a smell?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
Can you repair a crack in an acrylic bath?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What about rust by the waste?
Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.
What happens next?
We review the pictures and send a fixed quote and the next dates we have.
Do you repair coloured baths?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
About our accreditations · Every repair comes with a one-year guarantee.
