Rutland · England
Bath chip & crack repair in Manton, Rutland
Fixed-price bath repair in Manton and the surrounding area, normally in one visit and guaranteed for a year.
- Repairs from £95
- Chips along the edge of the bath
- A cracked acrylic bath
Bath repair at your home in Manton
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We regularly repair roll-top & freestanding, acrylic and whirlpool & spa baths, and people most often call us about rust spots around the plughole and deep scratches in acrylic.
Big or small, you get the same one-year guarantee in Manton and across Rutland.
- Where
- Manton (LE15)
- County
- Rutland
- Warranty
- One year on every repair
- Quote
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
Different materials, different repairs
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
When to call us in Manton
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
You may need us if you’ve spotted any of these:
- A kit repair that didn’t last
- A cracked acrylic bath
- Impact holes in acrylic
- Chips caused by builders
What your quote should include
- How long it needs to cure
- Whether they match the colour on site
- Who will actually do the work
- What aftercare is recommended
Why repair rather than replace?
Swapping a damaged bath for a new one normally involves a plumber, removing the old bath, re-tiling and a new panel and disposing of the old one. A repair deals only with the damage in a single visit. Repairs from £95, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why us?
- Every repair guaranteed for a year
- Everything repaired in place
- Same prices wherever you are
- Colour mixed on the day to match
Take a look at our full price list and resurfacing vs replacement cost guide.
What affects the price in Manton
Repairs from £95. We give every job a fixed quote from photos. These are the things that affect it:
- Access to the area
- How hard the colour is to match
- The material and finish
- How much damage there is
Our prices are the same across the UK, so there’s no premium for Manton. The job itself decides the price: the material, the amount of damage and how many items.
How to get a fixed quote
Most quotes are done from photos alone. To help us price it:
- Any details about the material
- Whether it’s been repaired or coated before
- Your postcode, so we can check dates
- A close-up of the damage, in focus
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
How the visit works
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours. We clean up when we’re done and tell you when it’s ready to use.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
Preparing for the visit
- Keep children and pets away from the room on the day
- Let us know which floor the room is on
- Point us to the nearest place to park
Ask for a price
Most clients in Manton get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Advice
Towns and villages near Manton
More services for Manton
Covering Manton
Manton is about 3 miles south-east of Oakham, in Rutland. From the centre of Manton to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Manton is one of 47 places in Rutland we cover. You can also see our page for Birmingham, about 51 miles away.
All of LE15 is covered. You’ll find streets such as Dairy Lane, Church Lane and Stocks Hill, all of which we cover. We also travel to Wing (1 mile south-east), Lyndon (2 miles east), Pilton (2 miles south-east), Edith Weston (3 miles east) and North Luffenham (3 miles east). Within a short drive, we also cover Oakham (3 miles north-west), Uppingham (3 miles south), Barleythorpe (4 miles north-west), Cottesmore (6 miles north), Langham (5 miles north-west) and Whissendine (7 miles north-west).
Near you in Manton
Typical jobs here are in homes near Church of St Mary, among other places. For rail, the closest station is Oakham station, roughly 3.1 miles north-west of the centre. Well-known places in the area include Normanton Church Museum (3.4 miles east) and Burley Castle (4.6 miles north). Green spaces nearby include King's Hill.
Your questions about bath repair in Manton
Will the repair show?
On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.
Do you charge for travel?
We do not add a call-out fee. The fixed price covers the visit and the work.
Can I get a quote without a visit?
In nearly every case. If photos do not show enough, we’ll ask for another angle.
Can you repair a hole in a bath?
Generally. Photos of the hole and the underside help us check.
What areas do you cover?
The entire UK, including all of Rutland. Just include your postcode and we’ll offer you dates.
How do I get a price for bath repair in Manton?
Prices start from £95. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit typically costs less than separate visits. Send photos of everything you’d like done.
When we would advise against a repair
Not everything can be repaired, and we will tell you before we start. Repairs will not solve:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Water coming from the waste or taps rather than the bath
- A bath that moves underfoot, until its support is fixed
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Manton
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
About our accreditations · Every repair comes with a one-year guarantee.
