East Sussex · England

Bath chip & crack repair in Maresfield, East Sussex

Chip and crack repairs to enamel, acrylic and cast iron baths in Maresfield, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Chips on the rim or sides
  • Deep scratches in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Maresfield homes

Your questions about bath repair in Maresfield

Do you repair coloured baths?

Yes. The colour is mixed on site to suit your bath, including older coloured suites.

How do I get a price for bath repair in Maresfield?

Repairs from £95. Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo and your postcode.

Can you quote from photos?

In nearly every case. If pictures do not show enough, we’ll ask for another angle.

Does someone need to be in?

We need someone to let us in. You don’t need to watch us work.

How invisible is a bath repair?

The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath.

How quickly can you book me in?

We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.

What if the damage is worse than the pictures show?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

Is a bath repair permanent?

A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.

How we handle bath repair in Maresfield

Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Whether it’s rusty patches near the plughole and impact holes in acrylic, we can usually put it right, on cast iron enamel, pressed steel enamel and acrylic alike.

A one-year guarantee comes as standard.

Area
Maresfield (TN22)
Area hub
East Sussex
Cover
A year, on every repair
Price
From £95. Free and fixed, from your pictures
Call
0345 017 0787
Updated
23 October 2026
Before and after: a damaged acrylic bath corner repaired in place

Repair or replace: which is better?

Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

Why Maresfield clients choose us

  • We come to you, anywhere in the UK
  • Everything repaired in place
  • Free fixed quotes from pictures
  • One-year guarantee on every repair

See our full price list and bath cost comparison.

About Maresfield

Maresfield is about 2 miles north of Uckfield, in East Sussex. We visit homes and businesses in Maresfield and nearby villages, so you don’t need to take anything anywhere. Our technicians cover 289 places across East Sussex, from the larger towns to small villages. Our nearest city page is London, about 36 miles away.

Jobs in TN22 work the same way as everywhere else we cover. Local streets include High Street, Robian Close and Batts Bridge Road, all of which we cover. Neighbouring places we cover include Budlett's Common (1 mile south-east), Down Street (1 mile west), Ridgewood (3 miles south), Little Horsted (3 miles south) and Newick (3 miles south-west). Larger places within reach include Seaford (15 miles south), Lewes (9 miles south-west), Hailsham (12 miles south-east), Crowborough (5 miles north-east), Newhaven (14 miles south) and Peacehaven (14 miles south).

Landmarks near Maresfield

In Maresfield, that means homes near Uckfield College, The Parish Church of St Bartholomew and West Park, among other places. For rail, the closest station is Uckfield station, about 2 miles south. Other landmarks nearby include Tickerage Castle (3.4 miles south-east) and Uckfield Community Hospital (2.3 miles south-east). Open spaces near Maresfield include Brickfield Meadow.

Map of Maresfield © OpenStreetMap contributors

Work for landlords and builders

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we will handle the rest.

What a repair cannot fix

Some jobs aren’t right for a repair, including:

  • A bath worn all over, where resurfacing makes more sense
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • A steel bath rusted through

Not sure? Send photos and we will give you a straight answer.

Surfaces we repair

  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Acrylic
  • Pressed steel enamel
  • Cast iron enamel

How it works

From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes a few hours, depending on the damage, depending on what we find, and we finish with a tidy-up and a look at the finished work together.

  1. We clean the area and remove any loose enamel or rust.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. We apply the finish coats and polish the repair so it blends in.
  5. The repair is left to cure, and most baths can be used the day after.

How to prepare

  • Plan for the room to be out of bounds to pets and children
  • Open a window if you can
  • Clear toiletries, mats and anything else from around the area

Getting a price

If you are in Maresfield and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Get a fixed quote

Read more

Prices and what affects them

Prices start from £95. There’s no charge for travel to Maresfield. The price depends on:

  • How much damage there is
  • The type of damage
  • Whether we combine several jobs
  • The material

Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.

Quotes from your pictures

Most quotes are done from pictures alone. To make it quick:

  • Whether it’s been repaired or coated before
  • Your postcode, so we can check dates
  • A clear, close picture of the problem area
  • Something in shot to show the size

Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.

DIY kit or professional repair?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

Do you need bath repair in Maresfield?

Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, any chip down to the metal will start to rust.

Keep an eye out for these signs:

  • Holes from dropped items
  • A failed DIY repair that’s discoloured or lifting
  • Hairline or through cracks in acrylic
  • Rusty patches near the plughole

Before you book anyone

  • What happens if they find more damage
  • How your room will be protected
  • Whether cleaning and preparation are in the price
  • Whether the price is fixed and includes VAT

Choosing a repair company

Looking after it afterwards

How the surface is treated afterwards matters:

  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Get a dripping tap fixed promptly
  • Have new chips seen to early
  • Store metal items away from the bath

Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.

A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.