Cheshire East · England
Bath Repair for Martin's Moss homes
Fixed-price bath repair in Martin's Moss and the surrounding area, normally in one visit and guaranteed for a year.
- Repairs from £95
- Snagging damage from a refit
- Rust spots around the plughole
Landlord and trade work in Martin's Moss
If you manage property in Martin's Moss, we will quote for several properties at once. Send photos for each one and we will price them together.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
About our bath repair in Martin's Moss
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, typically in a single visit. Typical jobs include a cracked acrylic bath and a kit repair that didn’t last, on roll-top & freestanding, pressed steel enamel and whirlpool & spa baths.
Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Where
- Martin's Moss (CW11)
- Area hub
- Cheshire East
- Warranty
- One year on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath repair
Repairs from £95. We price every job individually, from your photos. What matters most is:
- Where the damage is and how we get to it
- Whether we combine several jobs
- The size and number of damaged areas
- The colour and finish to match
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Send photos for a quote
Photographing the damage takes a minute, and it saves a visit. Please include:
- A coin beside the damage so we can judge size
- The material, if you know it
- Good light, ideally daylight, without flash glare
- Details of any past repairs
The quickest way to a price is to send two or three pictures using our quote form or call us. We’ll tell you honestly whether it can be repaired.
Repair or replace in Martin's Moss?
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- A year’s guarantee on all work
- Repair technicians who travel to you, UK-wide
- Free fixed quotes from pictures
- One price list for the entire UK
See our full price list and bath cost comparison.
Looking after it afterwards
Simple care helps the repair last. We recommend:
- Get a dripping tap fixed promptly
- Check that an acrylic bath doesn’t move when you stand in it
- Protect the bath with a towel when doing jobs nearby
- Avoid scourers, wire wool and gritty cream cleaners
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine.
Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Take it off before we arrive.
Common problems we fix in Martin's Moss
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
If you can see any of these, send us a picture:
- Chips along the edge of the bath
- A failed DIY repair that’s discoloured or lifting
- A cracked acrylic bath
- Scuffs and scratches in the surface
What your quote should include
- When it can be used again
- Whether they match the colour on site
- What prep work is covered
- What protection goes down before work starts
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaking fittings, which need a plumber
- Cracks in acrylic we cannot reach from underneath
Send us pictures and we will tell you honestly.
Materials we work on in Martin's Moss
- Pressed steel enamel
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
What we do, step by step
Here’s how a visit usually runs: we arrive on time, sheet and mask the area around the job, do the job and clear up. Allow a few hours from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Tell us about parking, stairs or access
- Clear the area around the damage
- Keep children and pets away from the room on the day
Get a quote
Email us photos of the damage and one of the entire item, with your CW11 postcode, and we’ll reply with a fixed price.
Read more
Nearby places to Martin's Moss
More services for Martin's Moss
Where we work around Martin's Moss
Martin's Moss is about 3 miles east of Sandbach, in Cheshire East. Jobs in Martin's Moss are booked in like any other job: a fixed quote from your photos, then a visit to do the work. We cover all 254 towns and villages in Cheshire East. Our nearest city page is Manchester, about 23 miles away.
Every address in CW11 is covered. You will find streets such as Little Back Lane and Martins Moss, and we cover them all. Neighbouring places we cover include Smallwood (1 mile south-east), Fourlanes End (1 mile south), Brookhouse Green (1 mile north-east), Mossend (1 mile north) and Smethwick Green (2 miles north). Larger places within reach include Crewe (7 miles south-west), Macclesfield (11 miles north-east), Congleton (4 miles east), Wilmslow (13 miles north), Nantwich (11 miles south-west) and Knutsford (11 miles north).
Near you in Martin's Moss
Typical jobs here are in homes near The Bulls Head pub, Smallwood CofE Primary School and St John the Baptist's Church and the streets around them. For rail, the closest station is Alsager station, about 3.5 miles south. Further afield, we also cover the area around Mow Cop Castle (4.1 miles south-east). For a walk, there’s Brookhouse Moss and Astbury Mere.
Martin's Moss: your questions answered
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can you repair a failed DIY repair?
Yes, we do this often. The old material comes out, any rust is treated, then we repair it properly.
Is a bath repair durable?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
What areas do you cover?
We cover the entire UK, including Martin's Moss and the rest of Cheshire East. Send your postcode with your pictures and we’ll confirm dates.
Can you repair a hole in a bath?
Usually. Photos of the hole and the underside help us check.
Can a cracked acrylic bath be fixed?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Can you repair something that’s been repaired before?
Most of the time. Let us know what was used before and we’ll plan for it.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children.
About our accreditations · Every repair comes with a one-year guarantee.
