Pembrokeshire · Wales
Bath chip & crack repair in Mascle Bridge, Pembrokeshire
Damaged bath in Mascle Bridge? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Impact holes in acrylic
Bath repair in Mascle Bridge, done in place
A typical bath repair is a few hours’ work, and you can typically bathe again the following day. There is no need to book a plumber or tiler, because the bath doesn’t move. Common call-outs are for damage done while the bathroom was being fitted and holes from dropped items, across whirlpool & spa baths, acrylic and cast iron enamel.
Big or small, it’s backed by a one-year guarantee in Mascle Bridge and across Pembrokeshire.
- Area
- Mascle Bridge (SA73)
- County
- Pembrokeshire
- Cover
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Mascle Bridge: your questions answered
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Something went through my bath. Can it be fixed?
In most cases. Send us a picture of the hole and one from under the bath if you can.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted.
Is there any odour?
There may be a mild smell during the work that clears as it cures.
Can you price it without visiting?
Normally, yes. A close-up and a wider photo are enough to give a fixed quote.
Will the price change on the day?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Do you repair coloured baths?
Yes, we match coloured baths too. We tint the finish to your bath on site.
What affects the price in Mascle Bridge
Prices start from £95. We charge the same across the UK, including Mascle Bridge. The price reflects:
- How much damage there is
- How easy the damage is to reach
- What kind of damage it is
- Any earlier repairs that need removing first
We charge the same wherever you are, with no extra for Mascle Bridge. The job itself decides the price: how much damage, what it’s made of and how many items.
Getting a price from pictures
We price nearly every job from pictures. This is what we need:
- A photo taken from further back
- Where you are, by postcode
- Any details about the material
- Daylight if possible, and no flash reflection
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
What a repair cannot fix
It helps to know what we can’t do:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Cracks in parts of an acrylic bath we can’t get to from below
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
Repair or replace in Mascle Bridge?
People often assume a cracked or chipped bath has to come out. In most cases it does not: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Repairs from £95, with every job priced individually. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why book with us
- Same prices wherever you are
- A fixed quote before you book
- Colour mixed on the day to match
- Dust sheets down, tidy finish
Read our full price list and bath cost comparison.
The process
We turn up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes two to three hours for most chips, and we leave the room as we found it.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, typically by the following day, the bath is ready to use.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Clear toiletries, mats and anything else from around the area
- Point us to the nearest place to park
How to get a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
Work for landlords and builders
If you manage property in Mascle Bridge, we’ll quote for several properties at once. Just send photos for each address and we will price them together.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
What we’re called out for in Mascle Bridge
A cracked acrylic bath typically wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the base flex.
Most people get in touch after spotting something like this:
- Holes from dropped items
- A chipped rim or side
- A kit repair that didn’t last
- Scratches you can feel with a fingernail
Comparing quotes
- If travel is included in the price
- What happens if they find more damage
- What the guarantee covers, and for how long
- What preparation is included
Mascle Bridge and the surrounding area
Mascle Bridge is about 3 miles east of Milford Haven, in Pembrokeshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We cover all 223 towns and villages across Pembrokeshire, from the larger towns to small villages.
We cover every part of the SA73 postcode area. Close by, we cover Glenowen (1 mile north-east), Little Honeyborough (1 mile north-west), Llanstadwell (1 mile south), Hazelbeach (1 mile south-west) and Great Honeyborough (1 mile east). Larger places within reach include Haverfordwest (6 miles north), Milford Haven (3 miles west), Pembroke (3 miles south-east), The Marsh (6 miles north), Dinbych-y-Pysgod (12 miles east) and The Green (11 miles east).
Local landmarks in Mascle Bridge
In Mascle Bridge, that means homes near Ferry Inn, St Tudwal's Church and Ysgol Harri Tudur/Henry Tudor School. For rail, the closest station is Pembroke Dock station, about 1.7 miles south-east. Well-known places in the area include Newton Mount Meadow (1.4 miles south-west) and Pembroke Dock Heritage Centre (1.4 miles south-east). Open spaces near Mascle Bridge include Ferry Wood and Pembroke River lower.
- Local facilities include Pembroke Dock: Llanion (2 miles south-east)
Also near Mascle Bridge
Other services in Mascle Bridge
How to look after the repair
Simple care helps the repair last. Our advice:
- Rinse the bath after use, especially in hard water areas
- Keep metal cans and razors off the surface
- Get a dripping tap fixed promptly
- Don’t leave a fresh chip for long
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
About our accreditations · Every repair comes with a one-year guarantee.
