Norfolk · England
Bath Repair for Mautby homes
Fixed-price bath repair in Mautby and the surrounding area, normally in one visit.
- Repairs from £95
- Impact holes in acrylic
- A cracked acrylic bath
Bath repair in Mautby, done in place
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath and the tiles around it. Most baths can be used again the day after. Whether it’s cracks in an acrylic bath and chips on the rim or sides, we can normally put it right.
Every job is backed for twelve months in Mautby and everywhere else. If something goes wrong with the work, we come back.
- Location
- Mautby (NR29)
- Region
- Norfolk
- Warranty
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Looking after it afterwards
How the surface is treated afterwards matters:
- Get a dripping tap fixed promptly
- Make sure an acrylic bath is firm underfoot
- Don’t leave a fresh chip for long
- Keep abrasive pads and gritty cleaners away from the bath
Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Remove it before the repair.
What we’re called out for in Mautby
A cracked acrylic bath typically wasn’t supported properly. Legs that are not adjusted, a missing cradle or a soft floor let the base flex until it cracks.
Signs it’s time to call us include:
- An old repair that has yellowed or come loose
- A cracked acrylic bath
- Scuffs and scratches in the surface
- Rust spots around the plughole
Before booking anyone
- Who will actually do the work
- What preparation is included
- How the colour is matched
- A fixed price, and whether VAT is included
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- A steel bath rusted through
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaking fittings, which need a plumber
Send us photos and we’ll tell you honestly.
What we work on
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
The process
We agree an arrival time beforehand, so you know when to expect us. Once we are there, the work takes a few hours in most cases. The room is left tidy.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Ensure the area is dry
- Move bottles, mats and clutter away from the area
- Keep a parking space free if you can
Get a quote
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and you are under no obligation.
Advice
Places near Mautby
Other services in Mautby
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Mautby questions
Are there extra charges for Mautby?
Travel is included in the price, with the same prices everywhere we work.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders across Norfolk.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Can rust on a bath be repaired?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.
Is a holed acrylic bath repairable?
Normally, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Do you work in Mautby?
Yes. We cover the entire UK and travel to Mautby. Send us photos for a fixed quote, or call 0345 017 0787.
What affects the price in Mautby
Prices start from £95. You won’t pay by the hour. The price depends on:
- The size and number of damaged areas
- Unusual colours or finishes
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
Set against the cost of replacement, repairing usually costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
How to get a fixed quote
Good photos mean an accurate price. Here’s what we find most useful:
- One picture of the whole bath
- A coin or ruler next to the damage for scale
- What it’s made of, if you know
- Natural light rather than flash
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Where we work around Mautby
Mautby is about 4 miles north-west of Great Yarmouth, in Norfolk. From the centre of Mautby to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Mautby is one of 797 places in Norfolk where we work.
Our repair technicians cover all of NR29 and the streets around it. Other places close to Mautby include Filby (1 mile north-west), Thrigby (1 mile west), Runham (1 mile south-west), Ormesby St Michael (2 miles north) and Ormesby St Margaret (2 miles north-east). Larger places within reach include Great Yarmouth (4 miles south-east), Gorleston-on-Sea (6 miles south-east), Sprowston (14 miles west), Thorpe St Andrew (14 miles west), Southtown (4 miles south-east) and Bradwell (6 miles south).
Around Mautby
Our customers here include homes close to Filby Primary School and Church of St Peter and St Paul and the streets around them. For rail, the closest station is Great Yarmouth station, roughly 3.7 miles south-east. Further afield, we also cover the area around Caister Castle (1.6 miles east) and Fishermens Hospital Including Gate Piers And Railings (4 miles south-east). Green spaces nearby include Berney Marshes RSPB reserve and Filby Broad.
Should you replace it?
Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it fixes just the damaged area in one visit. Our bath repair starts from £95. The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Why us?
- We leave the room as we found it
- A fixed quote before you book
- Straight answers about what a repair can do
- Colour-matched on site
Read our prices page or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
