Buckinghamshire · England
Bath Repair for Medmenham homes
Bath repair for Medmenham, without a refit. Get a fixed price from your pictures, then book a visit.
- Repairs from £95
- A chip where the taps sit
- A kit repair that didn’t last
Why repair rather than replace?
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Our bath repair starts from £95. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before you book.
Why Medmenham clients choose us
- Same prices wherever you are
- One visit for most repairs
- Colour-matched on site
- We leave the room as we found it
Read our full price list and bath cost comparison.
About our bath repair in Medmenham
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Typical jobs include hairline or through cracks in acrylic and snagging damage from a refit, in whirlpool & spa baths, roll-top & freestanding and cast iron enamel.
Every repair comes with a one-year guarantee, wherever you are in Buckinghamshire.
- Location
- Medmenham (SL7)
- County
- Buckinghamshire
- Warranty
- 12 months on all our work
- Price
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What affects the price in Medmenham
Prices start from £95. Prices are worked out job by job. What matters most is:
- How many areas need work
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- How hard the colour is to match
The price reflects the work involved, not your postcode. You’ll see the full price before booking.
How to get a fixed quote
When you take your photos, these tips help us give you a firm price:
- A picture taken from further back
- Any earlier repairs or coatings
- The postcode, so we can plan the visit
- The material, if you know it
For a price in Medmenham, pictures are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Materials and what they mean for the repair
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, just like other baths.
Medmenham questions
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Can you repair a chip on a coloured bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Do you come to Medmenham?
Yes. We cover the whole UK and travel to Medmenham and the rest of Buckinghamshire. Send photos and we will quote, or call 0345 017 0787.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Is the work guaranteed?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Is a cracked acrylic bath repairable?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.
Places near Medmenham
Other services in Medmenham
How the visit works
Here’s how a visit generally runs: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Allow a morning or an afternoon. Before we go, we’ll explain when it can be used and how to look after it.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Tell us about parking, stairs or access
- Plan for the room to be out of bounds to pets and children
- Clear the area around the damage
How to get a price
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Advice
Work for landlords and builders
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
When we would advise against a repair
We would rather lose a job than do one that will not last, so these are the limits:
- Cracks in acrylic we cannot reach from underneath
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Rust that has eaten right through a steel bath
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Cast iron enamel
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Aftercare tips
Simple care helps the repair last. We recommend:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Avoid scourers, wire wool and gritty cream cleaners
- Put a towel in the bath if you’re working above it
- Rinse it down after each bath
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and water can get through to the floor below.
Covering Medmenham
Medmenham is about 3 miles south-west of Marlow, in Buckinghamshire. From the centre of Medmenham to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Medmenham is one of 263 towns and villages in Buckinghamshire where we work. You can also see our page for London, about 32 miles away.
Jobs in SL7 work the same way as everywhere else we cover. Streets in the area include Bockmer Lane and Ferry Lane, all of which we cover. If you’re just outside Medmenham, we cover Bockmer End (1 mile north-east), Frogmill (1 mile south-east), Danesfield (1 mile east), Mill End (1 mile west) and Aston (1 mile west). We also work in nearby towns such as High Wycombe (6 miles north-east), Chesham (15 miles north-east), Marlow (3 miles north-east), Amersham (13 miles north-east), Beaconsfield (9 miles north-east) and Chalfont St Peter (13 miles east).
What’s near Medmenham
Locally, our jobs take us to homes close to Danesfield School, The Dog and Badger pub and Church of St Peter and St Paul and the streets around them. The closest station to Medmenham is Henley-On-Thames station, roughly 2.9 miles south-west of the centre. Nearby you’ll also find Marlow Community Hospital (3.3 miles north-east) and Marlow Museum (2.9 miles east). The countryside around Medmenham includes Hurley Chalk Pit and Weycock Hill.
About our accreditations · Every repair comes with a one-year guarantee.
