Oxfordshire · England
Bath chip & crack repair in Aston, Oxfordshire
Local bath repair for Aston: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- A failed DIY repair that’s discoloured or lifting
- A hole punched through by something heavy
Bath repair in Aston without replacing anything
A repair fixes just the damaged area and blends it into the rest of the bath, which costs far less than replacing a fitted bath. You can normally use the bath the following day. We’re often asked to fix chips on the rim or sides and hairline or through cracks in acrylic, in pressed steel enamel, acrylic and cast iron enamel.
All of our repairs are guaranteed for twelve months in Aston and everywhere else. We return to put right any problem with the work.
- Area
- Aston (RG9)
- County
- Oxfordshire
- Guarantee
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What bath repair costs
Repairs from £95. We give every job a fixed price from pictures. This is what makes a difference:
- Access to the area
- The size and number of damaged areas
- How many items we do on one visit
- What kind of damage it is
Compared with replacing, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Getting a price from pictures
It only takes a minute to photograph the damage. Try to send:
- Where you are, by postcode
- One picture of the entire bath
- A coin or ruler next to the damage for scale
- Natural light rather than flash
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
FAQs for Aston
Something went through my bath. Can it be fixed?
Generally. Photos of the hole and the underside help us check.
Is there a call-out fee?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Aston.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Do you cover Aston?
Yes. We cover the entire UK and travel to Aston and the rest of Oxfordshire. Send photos and we will quote, or call 0345 017 0787.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Which areas do you work in?
All of Oxfordshire, and the rest of the UK. There’s no extra charge for travel.
When a repair isn’t the answer
A repair isn’t right for every job, for example:
- Flexing caused by a failed cradle or loose feet
- Cracks in parts of an acrylic bath we cannot get to from below
- Rust that has eaten right through a steel bath
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Pressed steel enamel
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
How to care for the repair
So the finish stays in good condition for years:
- Rinse it down after each bath
- Do not leave razors or cans standing in the bath
- Keep abrasive pads and gritty cleaners away from the bath
- Cover the bath during DIY or decorating
Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
When to call us in Aston
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: the bath is not properly supported, so it flexes under weight.
Look out for these signs:
- Damage beneath the taps
- Chips on the rim or sides
- An old repair that has yellowed or come loose
- Chips caused by builders
Before you book anyone
- How changes to the job are handled
- What the guarantee covers, and for how long
- What protection goes down before work starts
- Whether cleaning and preparation are in the price
Aston and the surrounding area
Aston is about 2 miles north-east of Henley-on-Thames, in Oxfordshire. Anywhere in RG9, we carry out the work at your property. We cover 443 places in Oxfordshire. Our jobs stretch from Aston to London (34 miles away).
We cover every part of RG9. From Remenham Lane and Aston Ferry Lane or anywhere nearby, we can come to you. If you are just outside Aston, we cover Mill End (1 mile north), Remenham Hill (1 mile south), Remenham (1 mile west), Medmenham (1 mile east) and Bockmer End (2 miles east). Larger places within reach include Thame (14 miles north), Benson (11 miles north-west), Chinnor (10 miles north), Tilehurst (9 miles south-west), Wallingford (12 miles west) and Little Heath (10 miles south-west).
What’s near Aston
Around Aston, we work in homes near Fawley Court and Temple Island, Church of St Nicholas and Flower Pot Hotel, among other places. The nearest railway station is Henley-On-Thames station, about 1.7 miles south-west. Nearby you’ll also find Marlow Community Hospital (4.6 miles east) and Frazer Nash Archives (1.9 miles south-west). The countryside around Aston includes Weycock Hill and Hurley Chalk Pit.
Repair or replace in Aston?
Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Our bath repair starts from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Why Aston clients choose us
- CHAS, Constructionline and SafeContractor accredited
- No extra charge for your area
- Rooms protected and left tidy
- Colour mixed on the day to match
See our full price list and bath cost comparison.
The process
We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and we start. It normally takes a few hours, depending on the damage.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the day after.
Before we arrive
- Mention any earlier repairs or resurfacing
- Mention if the room is upstairs or in a flat
- Keep pets and children out of the room while we work
Ask for a price
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed quote back. There’s no charge for the quote and no obligation.
Related advice
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
More services for Aston
Landlord and trade work in Aston
For anyone letting property in or around Aston, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
About our accreditations · Every repair comes with a one-year guarantee.
