Stoke-on-Trent · England
Bath chip & crack repair in Meir, Stoke-on-Trent
Bath repair in Meir without the cost of replacing. Send us pictures for a fixed quote, then book a visit.
- Repairs from £95
- Scratches you can feel with a fingernail
- Rust by the waste and overflow
FAQs for Meir
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
What happens once I’ve sent pictures?
You get a fixed price and available dates. If we need another angle, we will ask.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Do the materials smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum.
How do I book?
Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.
Do you do work for letting agents?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Is a cracked acrylic bath repairable?
Frequently, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.
Bath repair in Meir without replacing anything
Most of our bath repairs take a few hours, and you can usually bathe again the following day. You won’t need a plumber or tiler, because the bath does not move. If you’re dealing with a cracked acrylic bath and a chip where the taps sit, we can help, on cast iron enamel, whirlpool & spa baths and roll-top & freestanding alike.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Meir (ST3, ST11)
- Region
- Stoke-on-Trent
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Keeping it looking good
It’s all simple stuff:
- Get any new chip repaired before it rusts
- Get a dripping tap fixed promptly
- Keep metal cans and razors off the surface
- Do not scrub with anything abrasive
There is nothing special to do after a repair, just sensible cleaning. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and it can start to leak underneath.
Common problems we fix in Meir
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: the bath isn’t properly supported, so it flexes under weight.
Most people get in touch after spotting something like this:
- Rusty patches near the plughole
- A kit repair that didn’t last
- Hairline or through cracks in acrylic
- Deep scratches in acrylic
What your quote should include
- If travel is included in the price
- Whether a trained technician does the job
- How long the guarantee is and what it covers
- Is the price fixed, and does it include VAT?
Honest limits
A repair isn’t right for every job, including:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Metal that has corroded all the way through
- Water coming from the waste or taps rather than the bath
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
Repair or replace: which is better?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. Repairing it leaves it where it is. Our bath repair starts from £95. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why Meir customers choose us
- No need to remove anything
- CHAS, Constructionline and SafeContractor accredited
- One visit for most repairs
- A year’s guarantee on all work
See our full price list and resurfacing vs replacement cost guide.
What affects the price in Meir
Prices start from £95. Prices are worked out job by job, from your photos. The main factors are:
- Unusual colours or finishes
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
- The size and number of damaged areas
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access.
Send pictures for a quote
You can take the pictures on your phone, there is no need for anything special. Just ensure we can see:
- Something in shot to show the size
- Any earlier repairs or coatings
- Natural light rather than flash
- Your postcode, so we can check dates
Most clients in Meir get their price from photos. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
How it works
Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. It typically takes a few hours, and you’re welcome to carry on with your day while we work.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, usually by the day after, the bath is ready to use.
Before we arrive
- Keep pets and children out of the room while we work
- Clear toiletries, mats and anything else from around the area
- Point us to the nearest place to park
Getting a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Related advice
Our work in Meir
Meir is about 1 mile south-east of Longton, in Stoke-on-Trent. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in all 59 towns and villages across Stoke-on-Trent. Our nearest city page is Manchester, about 35 miles away.
Our visits in ST3 and ST11 work the same way as everywhere else we cover. Whether you live on Box Lane, Meir Road and Bird Road or anywhere nearby, a technician can come to you. With the A520 close by, Meir is simple for us to get to. Neighbouring places we cover include Lightwood (1 mile south-west), Normacot (1 mile south-west), Florence (1 mile south-west), Adderley Green (1 mile north-west) and Longton (1 mile north-west). We also work in nearby towns such as Stoke-on-Trent (4 miles north-west), Hanley (4 miles north-west), Burslem (6 miles north-west), Stoke-upon-Trent (4 miles north-west), Tunstall (7 miles north-west) and Fenton (3 miles north-west).
Local landmarks in Meir
We visit homes around Alexandra Junior School, Longton High School and Meir Holy Trinity Church, among other places. The closest station to Meir is Longton station, about 1.6 miles north-west of the centre. Well-known places in the area include Beswick Museum (under half a mile south) and North Staffordshire Royal Infirmary (4.3 miles north-west). Open spaces near Meir include Hem Heath Woods.
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
Also in Meir
For landlords and businesses
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.
About our accreditations · Every repair comes with a one-year guarantee.
