North Yorkshire · England
Bath chip & crack repair in Melmerby, North Yorkshire
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Melmerby. Send photos for a free, fixed quote.
- Repairs from £95
- A failed DIY repair that’s discoloured or lifting
- Chips under the taps
About our bath repair in Melmerby
Whatever has happened to the bath, we aim for the same result: a repair that is smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. Whether it’s a failed DIY repair that’s discoloured or lifting and hairline or through cracks in acrylic, we can help.
Whatever the size of the job, it’s backed by a one-year guarantee in Melmerby and across North Yorkshire.
- Where
- Melmerby (HG4)
- Region
- North Yorkshire
- Cover
- A year, on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
Repairs from £95. You’ll know the full cost before booking. We look at:
- The material
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- How hard the colour is to match
Set against the cost of replacement, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
How to get a fixed price
You can typically get a fixed quote without us visiting. To help us price it:
- Any earlier repairs or coatings
- Any details about the material
- Where you are, by postcode
- One picture of the entire bath
Send us a picture of the damage and a wider shot of the entire item, and tell us you’re in Melmerby, and we’ll reply with a fixed price.
The process
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes a few hours. We tidy up before we leave and tell you when it’s ready to use.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can generally use the bath the next day.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Keep a parking space free if you can
- Keep children and pets away from the room on the day
Get a quote
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed price. There’s no charge for the quote and no obligation.
Related advice
Landlord and trade work in Melmerby
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Melmerby questions
Are there extra charges for Melmerby?
We do not add a call-out fee. Your fixed price includes everything.
Can you price it without visiting?
Usually, yes. A close-up and a wider photo are enough to give a fixed quote.
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Do the materials smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How long before I can use the bath?
Typically within a day, though it depends on what we’ve done.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Can you redo someone else’s repair?
Most of the time. Let us know what was used before.
How to care for the repair
So the finish stays in good condition for years:
- Get any new chip repaired before it rusts
- Store metal items away from the bath
- Use a soft cloth and washing-up liquid for everyday cleaning
- Do not scrub with anything abrasive
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine without abrasive products.
If water is getting through a crack, stop using the bath. Water under the bath can damage the floor and the ceiling below.
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Honest limits
We won’t take on work that will not last, so these are the limits:
- Cracks in acrylic we cannot reach from underneath
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Water coming from the waste or taps rather than the bath
Not sure? Send pictures and we will give you a straight answer before booking.
What we work on
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
Why repair rather than replace?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Prices start from £95. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Melmerby customers choose us
- Colour-matched on site
- Normally one visit, start to finish
- No extra charge for your area
- Honest advice, even when it means no job
Read our prices page or bath cost comparison.
What else we do in Melmerby
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Melmerby and nearby
Melmerby is about 4 miles north-east of Ripon, in North Yorkshire. Book a date that suits you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. Our technicians cover all 626 towns and villages in North Yorkshire. You can also see our page for Leeds, about 26 miles away.
Our repair technicians cover all of the HG4 postcode area and the streets around it. Jobs here include addresses on Witherick Lane, Melmerby Green Lane and Maple Garth. Neighbouring places we cover include Baldersby St James (2 miles east), Rainton (2 miles east), Copt Hewick (3 miles south), Dishforth (3 miles south-east) and Bridge Hewick (3 miles south). Larger places within reach include Harrogate (13 miles south), Knaresborough (12 miles south), Ripon (4 miles south-west), Northallerton (11 miles north), Starbeck (13 miles south) and Thirsk (7 miles north-east).
Local landmarks in Melmerby
Typical jobs here are in homes near Church of St Mary and the streets around them. Well-known places in the area include The Workhouse Museum (3.3 miles south-west) and Ripon Community Hospital (3.5 miles south-west).
About our accreditations · Every repair comes with a one-year guarantee.
