East Riding of Yorkshire · England

Bath Repair in Meltonby

Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Meltonby. Send pictures for a free, fixed quote.

  • Repairs from £95
  • Damage done while the bathroom was being fitted
  • Chips on the rim or sides
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Meltonby

What we do, step by step

We work cleanly and quietly. We protect the area first, then the job itself takes a few hours. Before we leave, we explain how soon it can be used and how to look after it.

  1. First, we check the damage against your pictures and agree the plan.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

Getting ready for the visit

  • Tell us about any previous repairs or coatings
  • Tell us about parking, stairs or access
  • Clear toiletries, mats and anything else from around the area

How to get a price

Most clients in Meltonby get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

Send pictures for a quote

Advice

Bath repair in Meltonby without replacing anything

It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. We regularly repair acrylic, roll-top & freestanding and whirlpool & spa baths, and people most frequently call us about a kit repair that didn’t last and holes from dropped items.

Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.

Location
Meltonby (YO42)
Region
East Riding of Yorkshire
Guarantee
A year, on every repair
Quote
From £95. Free, fixed price from pictures
Phone
0345 017 0787
Updated
23 October 2026
Before and after: a damaged acrylic bath corner repaired in place

Materials and what they mean for the repair

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Acrylic

Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.

What bath repair costs

Repairs from £95. We give every job a fixed quote from pictures. These are the things that affect it:

  • Previous DIY repairs that have to come out
  • Access to the area
  • Whether it’s a chip, crack, burn or wear
  • The colour and finish to match

Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.

Quotes from your photos

Two or three clear photos are usually enough. It helps if you send:

  • A close-up of the damage, in focus
  • What it’s made of, if you know
  • Natural light rather than flash
  • A coin beside the damage so we can judge size

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed price, not an estimate.

Landlord and trade work in Meltonby

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will arrange it.

Do you need bath repair in Meltonby?

Rust generally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.

Send us a photo if you notice any of these:

  • A chipped rim or side
  • A chip where the taps sit
  • Chips caused by builders
  • Scuffs and scratches in the surface

Comparing quotes

  • Whether the price covers travel
  • How soon you can use it again
  • How the colour is matched
  • How to look after the finish

Choosing a repair company

Looking after it afterwards

Most damage we see is avoidable. These habits help:

  • Do not leave razors or cans standing in the bath
  • Avoid scourers, wire wool and gritty cream cleaners
  • Rinse it down after each bath
  • Get any new chip repaired before it rusts

Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.

If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.

DIY repairs versus a professional job

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

When a repair is not the answer

We won’t take on work that will not last, so here’s what a repair can’t put right:

  • Flexing caused by a failed cradle or loose feet
  • Wear across the entire surface, which needs re-enamelling
  • Acrylic cracks with no access behind them

If in doubt, send pictures and we will say what we think.

Materials we repair

  • Roll-top & freestanding
  • Acrylic
  • Cast iron enamel
  • Pressed steel enamel
  • Whirlpool & spa baths

Common questions in Meltonby

Do you charge for travel?

No. Our quotes include travel, with the same prices everywhere we work.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as homeowners.

Is a bath repair durable?

Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

When can you do it?

We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.

Will you leave a mess?

No. The work area is masked and covered, and we leave the room clean.

Do you cover Meltonby?

Yes. We cover the whole UK and come to Meltonby. Send us photos for a fixed quote, or call 0345 017 0787.

What areas do you cover?

We work UK-wide, so Meltonby is covered. Prices do not change with location.

About Meltonby

Meltonby is about 2 miles north of Pocklington, in East Riding of Yorkshire. Wherever you are in the YO42 postcode area, we come to you. Meltonby is one of 299 places in East Riding of Yorkshire where we work. We work right across the region, from Meltonby to Leeds (about 33 miles away).

Postcode districts we cover here: YO42. Other places close to Meltonby include Yapham (1 mile south-west), Great Givendale (1 mile north-east), Ousethorpe (1 mile south-east), Bishop Wilton (2 miles north) and Millington (2 miles east). Within a short drive, we also cover Driffield (15 miles east), Market Weighton (8 miles south-east), Howden (15 miles south), Stamford Bridge (5 miles west), South Cave (15 miles south-east) and Gilberdyke (15 miles south).

Near you in Meltonby

Around Meltonby, we work in homes near Church of Saint Martin and Woldgate School and Sixth Form College, among other places. Further afield, we also cover the area around Penny Arcadia (2.3 miles south). Open spaces near Meltonby include Bishop Wilton Wold.

Map of Meltonby © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.