Norfolk · England
Bath Repair in Metton
We travel to Metton for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Impact holes in acrylic
- Hairline or through cracks in acrylic
Bath repair in Metton without replacing anything
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Whether it’s an old repair that has yellowed or come loose and scratches you can feel with a fingernail, we can help, on pressed steel enamel, cast iron enamel and roll-top & freestanding alike.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll come back.
- Where
- Metton (NR11)
- County
- Norfolk
- Cover
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Should you replace it?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, a new panel is frequently needed, and the plumbing has to be disconnected and refitted. A repair skips all of it. Our bath repair starts from £95. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before booking.
What you get with us
- No extra charge for your area
- Technicians who travel to you, UK-wide
- CHAS, Constructionline and SafeContractor accredited
- Honest advice, even when it means no job
See our full price list or guide to resurfacing and replacement costs.
Nearby places to Metton
Also in Metton
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Where we work around Metton
Metton is about 7 miles north-west of North Walsham, in Norfolk. We travel to customers in Metton, so nothing has to leave your home. We cover all 797 towns and villages in Norfolk.
Every address in NR11 is covered, from the main roads to the quietest streets. We also cover the places around Metton: Sustead (1 mile west), Roughton (1 mile east), Lower Gresham (2 miles west), Thurgarton (2 miles south-west) and Alby Hill (2 miles south). Further out, we also cover North Walsham (7 miles south-east), Sheringham (4 miles north-west), Taverham (14 miles south), Cromer (3 miles north-east), Aylsham (7 miles south) and Holt (7 miles west).
Landmarks near Metton
In Metton, that means homes near Church of St Andrew and the streets around them. The nearest railway station is Roughton Road station, roughly 2.3 miles north-east. Nearby you will also find Gresham Castle (2.2 miles west) and Cromer Hospital (2.9 miles north-east). Green spaces nearby include Beacon Hill.
Landlords, agents and businesses in Metton
If you manage property in Metton, we can repair and quote for several addresses together. Send pictures for each one and we will price them together.
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Prices and what affects them
Repairs from £95. We charge the same across the UK, including Metton. What changes the price is:
- How many items we do on one visit
- The material and finish
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
Our prices are the same across the UK, with no extra for Metton. The job itself decides the price: how much damage, what it’s made of and how many items.
Getting a price from photos
You can take the photos on your phone. Just ensure we can see:
- The postcode, so we can plan the visit
- The material, if you know it
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Do you need bath repair in Metton?
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
Look out for any of the following:
- Rust by the waste and overflow
- Holes from dropped items
- Cracks in an acrylic bath
- An old repair that has yellowed or come loose
Questions to ask before booking
- How long the guarantee is and what it covers
- How your room will be protected
- How long it needs to cure
- Who will actually do the work
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Aftercare tips
A little care keeps the finish looking good. Our advice:
- Keep metal cans and razors off the surface
- Use a soft cloth and washing-up liquid for everyday cleaning
- Rinse it down after each bath
- Cover the bath during DIY or decorating
A repaired bath needs no special treatment, just sensible cleaning. Skip bleach and gritty creams.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Remove it before the repair.
How the visit works
We turn up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. Most visits take two to three hours for most chips, and the room is left clean and tidy.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, normally by the next day, the bath is ready to use.
Before we arrive
- Open a window if you can
- Tell us about parking, stairs or access
- Mention if the room is upstairs or in a flat
Get a quote
The quickest way to a price is to send two or three pictures through our quote form or call us. We will tell you honestly if a repair is the right fix.
Related advice
FAQs for Metton
Is there any odour?
There may be a mild smell during the work.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Will the repair show?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
When can I have a bath again?
Generally the following day. We’ll tell you the exact curing time when we finish.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Norfolk.
About our accreditations · Every repair comes with a one-year guarantee.
