Lincolnshire · England
Bath Repair in Middle Rasen
Chip and crack repairs to enamel, acrylic and cast iron baths in Middle Rasen, carried out at your home and guaranteed for a year.
- Repairs from £95
- Scuffs and scratches in the surface
- Damage done while the bathroom was being fitted
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
Bath repair in Middle Rasen without replacing anything
Chips, cracks, rust spots and small holes is repaired in place. There is no plumbing to disconnect, your tiles stay as they are, and the finish is matched to the rest of the bath. If you’re dealing with rusty patches near the plughole and damage done while the bathroom was being fitted, we can typically put it right, on whirlpool & spa baths, acrylic and pressed steel enamel alike.
All our work comes with a one-year guarantee, wherever you are in Lincolnshire.
- Where
- Middle Rasen (LN8)
- Region
- Lincolnshire
- Warranty
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What affects the price in Middle Rasen
Repairs from £95. A fixed quote means you know the cost before you book. We look at:
- How many items we do on one visit
- How easy the damage is to reach
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
How to get a fixed quote
You can take the photos on your phone, there’s no need for anything special. Ensure they show:
- One picture of the entire bath
- Any earlier repairs or coatings
- A coin or ruler next to the damage for scale
- The material, if you know it
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and no obligation.
Repairing versus replacing in Middle Rasen
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. A repair keeps it in place. Our bath repair starts from £95. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- One-year guarantee on every repair
- Work done at your home or business
- Colours mixed by hand to suit your surface
- We leave the room as we found it
Read our pricing and bath cost comparison.
Covering Middle Rasen
Middle Rasen is about 14 miles north-east of Lincoln, in Lincolnshire. Anywhere in LN8, a technician comes to you. We work in 732 places in Lincolnshire. Our jobs stretch from Middle Rasen to Leeds (57 miles away).
We work across LN8 and the streets around it. From Low Church Road, The Orchards and Heath Court or anywhere nearby, a technician can come to you. Neighbouring places we cover include Market Rasen (1 mile east), Buslingthorpe (3 miles south), Faldingworth (3 miles south-west), Lissington (4 miles south) and Wickenby (5 miles south). Larger places within reach include Lincoln (14 miles south-west), Louth (15 miles east), Birchwood (15 miles south-west), Ermine (12 miles south-west), Bracebridge Heath (15 miles south-west) and Welton (7 miles south-west).
Local landmarks in Middle Rasen
In Middle Rasen, that means homes near De Aston School, Church of St Peter and The Middle Rasen Primary School, among other places. The closest station to Middle Rasen is Market Rasen station, roughly 1.1 miles east. A little further out are Medieval castle and ecclesiastical complex (3.1 miles north-west). Not far away are Wolds Top.
Common questions in Middle Rasen
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Is a holed acrylic bath repairable?
Usually, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Will there be a smell?
There may be a mild smell during the work.
What happens next?
You get a fixed quote and available dates. If we need another angle, we’ll ask.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send pictures.
Nearby places to Middle Rasen
What else we do in Middle Rasen
Keeping it looking good
So the finish stays in good condition for years:
- Rinse it down after each bath
- Keep abrasive pads and gritty cleaners away from the bath
- Cover the bath during DIY or decorating
- Keep metal cans and razors off the surface
A repaired bath needs no special treatment, just sensible cleaning. Skip bleach and gritty creams.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Common problems we fix in Middle Rasen
Baths take more knocks than people expect: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
Contact us if you’ve noticed:
- A failed DIY repair that’s discoloured or lifting
- A hole punched through by something heavy
- Rust by the waste and overflow
- Cracks in an acrylic bath
What to look for in a quote
- What the guarantee covers, and for how long
- How the colour is matched
- How the room is protected while they work
- Whether there are any call-out or travel charges
How it works
Nothing needs to be moved out of the room. We bring everything we need with us, put protection down and get going once we have agreed what we are doing. It typically takes a few hours, and you can get on with other things while we are there.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Tell us if there are stairs or a lift
- Ensure the room can be ventilated
- Mention any earlier repairs or resurfacing
Getting a price
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Related advice
Different materials, different repairs
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
About our accreditations · Every repair comes with a one-year guarantee.
