North Yorkshire · England
Bath Repair for Milby homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Milby, with a one-year guarantee on every repair.
- Repairs from £95
- Chips caused by builders
- Holes from dropped items
Bath repair in Milby without replacing anything
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. You can normally use the bath the day after. If you are dealing with chips under the taps and an old repair that has yellowed or come loose, we can help, on acrylic, cast iron enamel and whirlpool & spa baths alike.
Every repair is covered by our one-year guarantee.
- Where
- Milby (YO51)
- County
- North Yorkshire
- Guarantee
- 12 months on all our work
- Price
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
How the visit works
You don’t need to empty the room beforehand. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. Most jobs take a few hours, and you are welcome to carry on with your day while we work.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Open a window if you can
- Let us know if it has been repaired before
- Avoid using the area for a few hours before we arrive
Ask for a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Related advice
Repair or replace in Milby?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Repairs from £95, with every job priced individually. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why Milby clients choose us
- We come to you, anywhere in the UK
- Free fixed quotes from pictures
- Colours mixed by hand to suit your surface
- Rooms protected and left tidy
Read our pricing and bath cost comparison.
Common problems we fix in Milby
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
Most people contact us when they notice something like this:
- A cracked acrylic bath
- An old repair that has yellowed or come loose
- Damage beneath the taps
- Holes from dropped items
Before you book anyone
- Is the price fixed, and does it include VAT?
- What happens if they find more damage
- How soon you can use it again
- If travel is included in the price
What a repair can’t fix
To be straight with you, some problems need a different fix:
- Acrylic cracks with no access behind them
- A steel bath rusted through
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
Not sure? Send photos and we’ll give you a straight answer before booking.
Surfaces we repair
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
Prices and what affects them
Repairs from £95. There’s no area surcharge for Milby. What changes the price is:
- Access to the area
- Whether we combine several jobs
- The type of damage
- How much damage there is
Set against the cost of replacement, repairing normally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
How to get a fixed price
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- A coin or ruler next to the damage for scale
- Your postcode, so we can check dates
- Details of any past repairs
- Natural light rather than flash
Most customers in Milby get their price from pictures. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Where we work around Milby
Milby is about 6 miles east of Ripon, in North Yorkshire. We travel to clients in Milby, so nothing has to leave your home. We cover 626 places in North Yorkshire. Our jobs stretch from Milby to Leeds (about 21 miles away).
Here we cover the YO51 postcode area. That includes homes on Larks Road, Owl Place and Wren drive. We also cover the places around Milby: Langthorpe (1 mile south-west), Humberton (1 mile north-east), Helperby (3 miles north-east), Brafferton (3 miles north-east) and Fawdington (4 miles north-east). We also work in nearby towns such as Harrogate (10 miles south-west), Knaresborough (7 miles south-west), Ripon (6 miles west), Starbeck (9 miles south-west), Thirsk (9 miles north) and Bilton (9 miles south-west).
What’s near Milby
Our clients here include homes close to Boroughbridge Primary School, The Anchor Inn and Church of All Saints, among other places. Other landmarks nearby include Aldborough Roman Town (1 mile south).
Also near Milby
Also in Milby
Aftercare tips
After the repair has cured, a few habits help it last:
- If an acrylic bath flexes, have its feet adjusted
- Cover the bath during DIY or decorating
- Fix dripping taps early to stop staining and limescale
- Get any new chip repaired before it rusts
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
Repairs by material
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Common questions in Milby
What if the damage is worse than the pictures show?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Milby.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
What does bath repair cost?
Repairs from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
Can tenants book a repair?
We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
About our accreditations · Every repair comes with a one-year guarantee.
